Very informative brotha. Can you do 6 networks with 3 routers next pls? It goes like this: 6PCs 6switches 3Routers For ex: pc 0 and 1 w/ Lan 1 and 2 connected to HQ, like that
You used a default gateway of 192.168.11.10 for network B at the beginning but you later used 192.168.11.0 while doing routing, is that meant to be a mistake?
Lot of knowledge about networking
sooo thankful sir u r the best explainer than our university teachers
Thankyou so much for ur hardwork, its very helpful to us
All the best
THANK YOU. I CAN FINALLY FINISH MY HOMEWORK IT WORKED
You're welcome!
Have an assignment due for tommorow. I have been struggling for 2 days. Ty this will help me when presenting tommorrow
All the best
Nice video knowledgeable
Way of explanation is very good, make more video constantly.
Excellent working 🎉
Thank you so much for the informative video. You're the best 🙏
Thanks a lot for teaching!!
From PH
Welcome
You're very welcome!
Very helpful thankyou
Thank you sir
Excellent and knowledgeable 👍
Thank you
Good 👍👍
Thank you sir
Informative video..Rise n Shine dude Thank you
Keep it up; nice explanation
thank you very much! it really helps with my study tasks!
You're very welcome!
Thank your very much for good job.
Thank you too!
Good
Wow very good teacher
Thank you! 😃
Keep it bro..good explanation
It works well
Thanks bro
❤❤❤
👍
Glad you like it
Thankyou so much sir
Most welcome
you should set the next hop as the ip address that is associated with the routers interface, but not the network address
There are multiple ways to assign ip addresses for hop.
can you do site to site vpn with Cisco ASA? thanks for the video.
Yes I can
How To configure two VLANs (one for wired LAN and one for WiFi) in Cisco Packet Tracer,??
kindly share any video based on this question..
Ok
thanks for your reply. i am waiting for your video. which is mentioned above.@@Cisco_Networking_Academy
Very informative brotha. Can you do 6 networks with 3 routers next pls?
It goes like this:
6PCs
6switches
3Routers
For ex: pc 0 and 1 w/ Lan 1 and 2 connected to HQ, like that
Ok
You used a default gateway of 192.168.11.10 for network B at the beginning but you later used 192.168.11.0 while doing routing, is that meant to be a mistake?
No it's a way of routing configuration
Is this a mesh topology
No, watch how to make mesh topology in cpt.
tracert command doesn't work fine :(
Too goo😢
can you please do to add only one dns server
Ok
@@Cisco_Networking_Academy thank you and i appreciate your work ........
Why my router overlaps
Recheck the addresses of the routers
@@Cisco_Networking_Academy thankz
I think it's not 3 network because they have the same subnet mask
Do subnetting bro
t.me/Cisco_Packet_Tracer_Networking
For any Queries
Join this
Thanks for the feedback
Waste of time doesnt work
Itna acha to padhaya hai bhai
❤❤❤