I went through other tutorials out there, some got the job done but all you got out of it was a connection. Long, drawn out hard to understand (not comprehend...but to be able to understand half the people talking). This, my friend, was simply the best hands down. I walked away fufilled. literally, I understood finally what I did. That was the whole battle...not just following videos but literally connecting the dots! Keep up the excellent work! Do more...encore!
If there was one more thing to make it complete, it would be that VLAN 10, VLAN 20, and VLAN 30 should not see each other but still have internet access. If I could ask for this addition, I would be very happy. I have been studying at Cisco Net Acad for 3 months, and you have helped me a lot. Thank you!
In my case i created also vlan 40,50,60. I enable ip routing on the switch and define a native vlan dot1q 1 on the router to separate vlan traffic from the Data vlan. I also connected a Wifi router to one interface to the switch, i had to configure Static routes from wifi router network to all different vlan networks with their respective gateways in order to be able to access across all networks. At the end i was able to ping all across the networks
"Thank you so much for sharing your expertise and creating these incredibly detailed and informative videos! Your step-by-step guides on Cisco routers and switches configuration have been instrumental in helping me start my career in networking. Your clear explanations, concise commands, and real-world examples have made complex concepts seem approachable and easy to understand. I've learned so much from you and I'm grateful for the time and effort you put into creating this content. Keep doing what you're doing, you're making a real difference in people's lives and careers! Thank you again!"
You and your video have helped me tremendously! Strength -- brilliant step-by-step with clear images. Issue - I have a CISCO 4300 Series connected to a 2960X Switch with 24 Ethernet access physical ports. References to port 48 were confusing... UNTIL, I realized that I could dedicate Port 24 as a trunk. Smooth sailing from here. Thank you so much. ~ B. Carter
Wow. This is fantastic training and the most straightforward TH-cam video out there. It provides easy-to-understand, step-by-step instructions on connecting a Cisco router and switch. I was watching another TH-cam channel, but I still could not understand. This will be my top TH-cam channel to go to whenever I need some explanations on Cisco switches and routers. Thank you so much.
Like and subscribe and Share, finally some real networking shit , not like the videos showing packetTracer topolgies or just speaking and not showing anything Bravo !
Thank you so much for making all this video, if u have some time. i would like to know what is spanning tree all about, kindly make one to let us understand...have a great day
hello i bought a cisco 892fsp router and I also have a cisco 3750 switch I am trying to connect to my isp but I cant find too much information. Any way you can advise on the matter? i find your videos very useful and can understand clearly Thank you!
can you help me? I followed your video on how to connect Cisco lab to home internet. I have a 2960 router and a 3750 switch. Everything worked but when i connect with my PC at the end It connects but doesnt give me internet. I have my windows firewall turned off. What should I check?
I have a Cisco 2900 that I'm running internet to via G0/0 that connects to my LAN, and that port gets an IP address and can be pinged just fine. What I need to do is figure out how to get the routing to work to Fa0/3/0-7.
Sir please upload video sophos / fortinet firewall with Cisco switch configuration Because in the market firewall very poluler compair to Cisco routers
Even though you have a firewall you will still need a router. Some routers come with firewall/ vpn build-in. My recommendation is that you learn on configuring both Cisco Router, Cisco Switch and add Sophos or any firewall of your choice.
You should explain in more detail... for example the OVERLOAD part.... what is it exactly, what is the syntax of that command, etc....... And how could you configure that the VLANs do not see each other?
dear sir g mai chata hon k vlans 10,20,30 in k pcs par internet work Kare but yeh 3 vlan ek dusra sa communication na Kare is topic par b video bano aur network scenario same ho ap na is topic ko pehla b cover Kia hai kyun k is thra ki video missed hai
This Ai voice is welcomed, because in the past videos people complained about not understanding his indian accent. So i think the channel made the correct choice with Ai narrator to solve this accent issue
I went through other tutorials out there, some got the job done but all you got out of it was a connection. Long, drawn out hard to understand (not comprehend...but to be able to understand half the people talking). This, my friend, was simply the best hands down. I walked away fufilled. literally, I understood finally what I did. That was the whole battle...not just following videos but literally connecting the dots! Keep up the excellent work! Do more...encore!
exellent , you are far better than my college professor, thank you
Not than Barnabee Barthélémy, he is better.
You are the top TH-camr for me. Please repair the Tp-Link outdoor Wi-Fi connection from 5 to 10 kilometers.
If there was one more thing to make it complete, it would be that VLAN 10, VLAN 20, and VLAN 30 should not see each other but still have internet access. If I could ask for this addition, I would be very happy. I have been studying at Cisco Net Acad for 3 months, and you have helped me a lot. Thank you!
In my case i created also vlan 40,50,60. I enable ip routing on the switch and define a native vlan dot1q 1 on the router to separate vlan traffic from the Data vlan. I also connected a Wifi router to one interface to the switch, i had to configure Static routes from wifi router network to all different vlan networks with their respective gateways in order to be able to access across all networks. At the end i was able to ping all across the networks
Listen, keep dropping like this you might have the #1 tech channel. I definitely subbed 💪🏾
Thanks for the sub!
100 times better than my 2 week school program.thank you
"Thank you so much for sharing your expertise and creating these incredibly detailed and informative videos! Your step-by-step guides on Cisco routers and switches configuration have been instrumental in helping me start my career in networking. Your clear explanations, concise commands, and real-world examples have made complex concepts seem approachable and easy to understand. I've learned so much from you and I'm grateful for the time and effort you put into creating this content. Keep doing what you're doing, you're making a real difference in people's lives and careers! Thank you again!"
AI comment lol
Thank u Teacher, bought 2nd hand switch and router following your step...result succeed.
You and your video have helped me tremendously! Strength -- brilliant step-by-step with clear images. Issue - I have a CISCO 4300 Series connected to a 2960X Switch with 24 Ethernet access physical ports. References to port 48 were confusing... UNTIL, I realized that I could dedicate Port 24 as a trunk. Smooth sailing from here. Thank you so much. ~ B. Carter
Very straight forward and to the point.
This video is so simple to understand and thank you very much.
Wow. This is fantastic training and the most straightforward TH-cam video out there. It provides easy-to-understand, step-by-step instructions on connecting a Cisco router and switch. I was watching another TH-cam channel, but I still could not understand. This will be my top TH-cam channel to go to whenever I need some explanations on Cisco switches and routers. Thank you so much.
Very detailed, very informative ! so much thank for your kindness .
this is it, literally the video i have been looking for
Simple & clear. Nice!!
Thank you so much for this great video...that's just what I was struggling with today...a million likes!!
Great presentation massage and information keep it up go ahead well done ❤❤❤❤
Thank you very much for sharing this short and precise video
This is an excellent instructional video. Thank you!
This is what I need to watch. Thank you❤
Like and subscribe and Share, finally some real networking shit , not like the videos showing packetTracer topolgies or just speaking and not showing anything Bravo !
Very detailed and informative.👍
Glad you liked it
I found this very useful. Thanks
Thank you so much for making all this video, if u have some time. i would like to know what is spanning tree all about, kindly make one to let us understand...have a great day
wooh this is what i was looking for.. Subscribed
thank you for this useful video!!!
Thanks. Great tutorial 👏
well explained! Great!
Thank you, Thank you, Thank you !
amazing tutorial, keep moving forward bruh
Very good video bro keep rocking and upload this type of real scaniro work video good 👍💯
Thank you for this video it's good and you give many details
Amazing explanation.. Thank you so much Sir
Nice never done 1 before but sounds easy enough
Amazing explanation 🙂
fantastic & nice explanation .
Thank you very much for sharing this video
wish all instructors no one will face difficult, it would be better if you create more contents
Good practices, thanks...
Subscribed and liked
Thank you!
Very good sir❤
Thank you 🙏
Muchas gracias por compartir y traducido al español. Me suscribo a su canal
GREAT!
🎉Very good
Thanks bro 🙏
hello with this diagram you face double nat right ? or you put isp router on bridge mode ?
Thank you
hello
i bought a cisco 892fsp router and I also have a cisco 3750 switch I am trying to connect to my isp but I cant find too much information. Any way you can advise on the matter? i find your videos very useful and can understand clearly Thank you!
Very nice video
this is great
Thanks, could you show how to configure Cisco router access to Internet with pppoe. Thank you ❤
Nice ...............
Great Video!!!!! what if you have more than 1000 hosts in each vlan, how to address them?
This kind of scenario where we can apply ? because client connect switch any port it will assign ip address dhcp.
what if you have a server that is running active directory and dhcp how would you add that to this network?
very nice video
Very good
very informative
Glad you liked it
exellent
Thanks bro
Thanks
thanks for video, i have question, on this router, i do not want to creat sub interface on F0/1 -> how to config, thanks
can you help me? I followed your video on how to connect Cisco lab to home internet. I have a 2960 router and a 3750 switch. Everything worked but when i connect with my PC at the end It connects but doesnt give me internet. I have my windows firewall turned off. What should I check?
Is there any Ccna course yours
Jio guruji,Ram Ram
I have a Cisco 2900 that I'm running internet to via G0/0 that connects to my LAN, and that port gets an IP address and can be pinged just fine. What I need to do is figure out how to get the routing to work to Fa0/3/0-7.
Sir please upload video sophos / fortinet firewall with Cisco switch configuration
Because in the market firewall very poluler compair to Cisco routers
Ok I will try
Even though you have a firewall you will still need a router. Some routers come with firewall/ vpn build-in. My recommendation is that you learn on configuring both Cisco Router, Cisco Switch and add Sophos or any firewall of your choice.
. bano ga na is same network scenario ko use kar k ACL configure karan par video k 3 vlans ek duras k sath communication na Kare dear sir g ?
How we can assign BW isp to router uplink port ?
❤❤❤
Good
Hello! How to configure the bandwidth for each IP so that the entire GE port bandwidth is not consumed
Thanks
You should explain in more detail... for example the OVERLOAD part.... what is it exactly, what is the syntax of that command, etc....... And how could you configure that the VLANs do not see each other?
I have error command invalid input " route (dhcp-config)#network 10.10.10.0 /24 what' happen?
brother what is ip nat inside/outside
to tell the router which port is WAN and which port is LAN, also to allow Internet access from LAN
You don't need a static route for an interface that is getting its IP via DNCP.
❤
dear sir g mai chata hon k vlans 10,20,30 in k pcs par internet work Kare but yeh 3 vlan ek dusra sa communication na Kare is topic par b video bano aur network scenario same ho ap na is topic ko pehla b cover Kia hai kyun k is thra ki video missed hai
I prefered your own explanation during the video.The new one is an AI I guess which is really fake.
yg penting informasinya dapet, siapa yang ngisi suara gak terlalu penting
This Ai voice is welcomed, because in the past videos people complained about not understanding his indian accent. So i think the channel made the correct choice with Ai narrator to solve this accent issue
How to change command switch: to switch> or switch#
no shutdown doesn't work in any sub interface so there is no need to write no shutdown when you're in the subif, only no shutdown the interface itself
The human voice was better than the AI voice honestly. Don't worry about having an accent.
Lekin jinko double glass ka shesha patla hota hy single glass ki nisbat
You can avoid doing a router on a stick and install a third WIC g0/2/0 to better aid in security, QoS, and crosstalk.
Put 20 for ofis hour they like must
Coming from a CS degree
Hi @CiscoConfig I would like to get in touch to talk about an opportunity. How can I reach out ?
Crips. easy and perfectly done
It is very useful, thanks Sir❤
Thank you!
Very nice