I got my windage tray/gasket from MMR. I had to bust out the Dremel but works great. I like that pickup tube you're using, never knew they made those. Thank you as always for the videos.
Good stuff! Glad I found your channel I recently picked up a 97 Rio red cobra with a spun rod bearing. Planning to tackle it myself.. I've helped dad with sbf/Cleveland stuff before but never dove into a modular. Might have a question or 3 😅
Yes sir, the br3z6710b Oil Pan Gasket worked great for me. $50 from Tasca, but $40 for shipping :/ I did have to cut the tray a bit in order to use the stock p/u tube. Your clearance video using playdoh worked great :)
Hi John, what’s the part number on your boundary, I’m building a teksid, with forged crank, out of an MMR 750hp cobra block, I did have the crank balanced (FYI), the crank won’t fit through the front of my boundary. The tabs on the face of pump are too tight, basically makes the hole too small. Thanks for any info.
I got my windage tray/gasket from MMR. I had to bust out the Dremel but works great. I like that pickup tube you're using, never knew they made those. Thank you as always for the videos.
Amazing almost done with my block . Everything looks great can’t wait to get it .Thanks for the great videos and your hard work 👍
Thank you, it would have been done this weekend if I had the correct oil pan gasket. Hopefully, I can get one this week and finally finish it.
Good stuff! Glad I found your channel I recently picked up a 97 Rio red cobra with a spun rod bearing. Planning to tackle it myself.. I've helped dad with sbf/Cleveland stuff before but never dove into a modular. Might have a question or 3 😅
Yes sir, the br3z6710b Oil Pan Gasket worked great for me. $50 from Tasca, but $40 for shipping :/ I did have to cut the tray a bit in order to use the stock p/u tube. Your clearance video using playdoh worked great :)
Yeah the shipping from Tasca has gotten out of control!
@@JohnSmithRacing any fitment issues with stock oil dip stick with this windage tray? I am having trouble putting mine in all the way.
Heck yeah, sick video!
Hi John, what’s the part number on your boundary, I’m building a teksid, with forged crank, out of an MMR 750hp cobra block, I did have the crank balanced (FYI), the crank won’t fit through the front of my boundary. The tabs on the face of pump are too tight, basically makes the hole too small. Thanks for any info.
The pump in this video is part number MM-S1
What’s the torque spec for windage tray bolts & that hex bolt / spacer ??
I put the ARP windage tray nuts and the hex to 20-25 ft-lbs.