Try somelong tube headers dumping into 2.5" true duals with H pipe and Foxbody 5.0 mufflers leading to 3" tips out the back . That's what I built on my 2003 crewcab 4x4 s10 and it sounds freakin awesome! Also made big improvement on power and fuel economy
So what exactly is your setup? I'm interested in doing this to mine. What straight pipe are you using and what did you take out/put in? Also, did you have to relocate any piping?
I'm trying to decide: Flowmaster Super 10s vs this And this is looking like the better option. Why? It sounds just as good without the restriction. If I run into any trouble, then I would add the Flowmaster muffler.
I would recommend the straight pipe. some mufflers can make it sound weird. the straight pipe sounds good without being too loud, and it is much cheaper
year late to this party, but i've got a single in dual out 40 series flowmaster on my sonoma and turndowns that dump right before the axle. it's very deep and rumbly. when i pull up to work, it resonates the sheet metal walls of our building and everyone knows i'm late again.
+Michel Linschoten That'll make it loud in the cab. With the tailpipe it keeps it fairly quiet in the cab so you can cruise in peace. If you drive a lot everyday, that'll get old quickly. At my old job, I had a straight piped International, it sounded great but after driving it all day you just wanted to be done because it had been loud all day.
Meh not a problem , i am from the South my man, but my truck is not daily driven :) You notice it when you have asshats in front of you hovering on 43mph or so, that's pretty much the sweets pot for it to go into that 4th gear. rumbles in 3 on higher rpm lol!
Michel Linschoten I like a more mild sound on these trucks. I know a guy with an S10 who put a y-pipe in place of the muffler and had dual tailpipes made. It sounds decent but a bit loud for a V6 for my taste. I prefer a Dynomax Super Turbo with a turndown just in front of the axle, that sounds great on these trucks.
I put a 1 in to 2 out 40 series flowmaster on mine. Duel pipes straight out the back on both sides of the rear license plate. Sounds like a mild small block at idle and deep. But I also have a Catco high flow cat and pacesetter headers.
Its just 2 pieces of pipe that i got from autozone and 4 exhaust clamps. you will need to measure the pipes that are on the truck. You also need something to saw the old muffler off.
@@koplarf I with ya on this😂 there is no way a 2.2 sounds like this.. I’m straight piping my 2001 s10 extended cab at the moment and wanted to see what I would sound like so I stumbled upon your video
koplarf Did you run a reducer? My friend's Blazer is 3" into the muffler and 2.25" out to the tailpipe. We ran a reducer and a 2.5" Thrush Turbo, sounded decent, bit of drone.
skoalmint614 your not the brightest tool in the shed are you, the V6 sounds hella better, which means it dont sound like a shitbox honda, and the V6 makes more power, way more power
GM never should of discontinued the mighty S10.
I don't care as much about the s10/sonoma as I do about the 4.3. It still pisses me of that they discontinued it
They are still made in Brazil
@@chickenfoundation9323 That's cool. But what do they look like.
I think they still make them in Mexico
@@blonderaider4281 They look like the Colorado's iirc
This deserves more views, well done looks dope and sounds even better. I'll give you the credit when I do this.
my truck that my papaw gave me a v6 4.3l engine Chevy s10 and i may go for a straight pipe in place of the muffler for more horsepower.
great examples! just Wat I was looking for!
Sounds like a fucken v8 at idle, that's awesome
I love my 2003 Chevy S10 as much as my 2008 Mustang
Try somelong tube headers dumping into 2.5" true duals with H pipe and Foxbody 5.0 mufflers leading to 3" tips out the back .
That's what I built on my 2003 crewcab 4x4 s10 and it sounds freakin awesome!
Also made big improvement on power and fuel economy
yo my truck is kinda the same but its a low rider idk what to put on it but you got me some ideas man. thx
Sounds good bro.
So what exactly is your setup? I'm interested in doing this to mine. What straight pipe are you using and what did you take out/put in? Also, did you have to relocate any piping?
The straight pipe sounded like a diesel revving up
Hey man what's your wheel and tire specs brands. Looking for something close on my 98
I have an 4.3 v6 s10 and Im thinking about doing this
Sounds sick man. How does it sound when you're driving it? Ricey at all? I have a 4.3 Sonoma and I'm starting to look at different exhaust options
As long as you tighten up the clamps fully it doesn't sound Ricey at all
Where did you get the straight pipe?
Lol I have a 4.3 blazer and I thought about different exhausts as well
Big difference.
Are those 20s or 18s?
mine exits right before the rear tire
What size piping did you use? Interested in doing this also.
Sorry man this was so long ago I don't remember
I got an 03 extended cab zr2 and imma try and do this
Got the exact same truck and looking to do the same
I'm trying to decide:
Flowmaster Super 10s vs this
And this is looking like the better option.
Why? It sounds just as good without the restriction.
If I run into any trouble, then I would add the Flowmaster muffler.
I would recommend the straight pipe. some mufflers can make it sound weird. the straight pipe sounds good without being too loud, and it is much cheaper
@@koplarf agreed, did you cut your cats out and muffler for that last sound. It’s sounds crazy good.
year late to this party, but i've got a single in dual out 40 series flowmaster on my sonoma and turndowns that dump right before the axle. it's very deep and rumbly. when i pull up to work, it resonates the sheet metal walls of our building and everyone knows i'm late again.
Sounds like a 3.7 mustang v6 99 04
Mine is straight piped, shorten it and do a near 90 degrees tip under the bed just before the spare tire...
Thank me later :)
+Michel Linschoten That'll make it loud in the cab. With the tailpipe it keeps it fairly quiet in the cab so you can cruise in peace. If you drive a lot everyday, that'll get old quickly. At my old job, I had a straight piped International, it sounded great but after driving it all day you just wanted to be done because it had been loud all day.
Meh not a problem , i am from the South my man, but my truck is not daily driven :) You notice it when you have asshats in front of you hovering on 43mph or so, that's pretty much the sweets pot for it to go into that 4th gear. rumbles in 3 on higher rpm lol!
Michel Linschoten I like a more mild sound on these trucks. I know a guy with an S10 who put a y-pipe in place of the muffler and had dual tailpipes made. It sounds decent but a bit loud for a V6 for my taste. I prefer a Dynomax Super Turbo with a turndown just in front of the axle, that sounds great on these trucks.
Well try a flowmaster 40...purrrfect. and cheap too
I put a 1 in to 2 out 40 series flowmaster on mine. Duel pipes straight out the back on both sides of the rear license plate. Sounds like a mild small block at idle and deep. But I also have a Catco high flow cat and pacesetter headers.
What parts were necessary for the build to be as it is
Its just 2 pieces of pipe that i got from autozone and 4 exhaust clamps. you will need to measure the pipes that are on the truck. You also need something to saw the old muffler off.
Was their any welding or cutting involved?
Riley Lilly I cut the muffler out. It’s easy with a sawzall or a angle grinder
I have the exact truck exact color exact no muffler
just run a y pipe all the way to the back with 4" tips, it'll sound like a mix between a viper and a Mustang kinda
how much was everything
About $30 bucks id say
Where did you get the taillights
Google led tail lights for your s10 these will pop up I have a pair as well love them very bright
Do you know if there is matching headlights
Got them on eBay
I have a 97 so I had to square headlights I know they make LEDs but I'm not sure about any
Funny my 2.2l 4cyl s10 sounds the same.
no it doesnt
@@koplarf I with ya on this😂 there is no way a 2.2 sounds like this.. I’m straight piping my 2001 s10 extended cab at the moment and wanted to see what I would sound like so I stumbled upon your video
want your halos and rims
those halos fucking sucked the leds went out way too soon. the rims were awesome though, I really liked them and they were cheap too
hey man do u have a cat on your truck
Go with flowmaster and no cats like I have.. go on my channel and look it's daytonw195
Sorry it took so long for me to reply but yeah I have a cat I think it's gutted though
koplarf Did you run a reducer? My friend's Blazer is 3" into the muffler and 2.25" out to the tailpipe. We ran a reducer and a 2.5" Thrush Turbo, sounded decent, bit of drone.
Compare 0:13 to 1:32
ew! if your getting a s10 mightaswell get a 4 cyl they go all day for less gas and last longer
Hate to break it to you but the 4 cylinder s10 is gay as fuck and defeats the purpose of even driving a truck
skoalmint614 the 4 cylinder is a pussy ass engine
skoalmint614 your not the brightest tool in the shed are you, the V6 sounds hella better, which means it dont sound like a shitbox honda, and the V6 makes more power, way more power
skoalmint614 my V6 even fucking backfires, and it sounds MEAN
skoalmint614 I blew the motor in my 2.2 before my 4.3
great examples! just Wat I was looking for!