ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ฝัง
- เผยแพร่เมื่อ 15 ม.ค. 2019
- In this video I take you through the process of installing a ram stem mount on my Ninja ZX636r supersport.
Stay Connected with me using the link below:
Instagram - / lifewithresearch
Camera Gear:
Camera: amzn.to/2zIa9Kh
Lens: amzn.to/2FrVY1e
External Monitor: amzn.to/2TpWPm0
2nd Camera: amzn.to/2Bf7I2Z
2nd Lens: amzn.to/2zbWcUM
Lav Setup: amzn.to/2TpeBpx
Tripod: amzn.to/2Fvotvg
SD Card: amzn.to/2ONeGQw
SSD Storage: amzn.to/2DLyKBx
If your whole video is about how to install the mount, whats the point cutting out the issues you faced and telling us how you overcame those issues? You had issues with the nut not tightening and then you edited and removed everything from there until its all setup and ready 🤷🏼♂️
Same issue so how to fix that would be helpful
@@nicksedgwick5189 he took it out tightened the nut more for more friction on the rubber
Before you do this, run the nut around on the bolt a few times until it’s smooth. I have a belt sander that I used to get the rubber the perfect size. (Also not in a cone shape, use a washer that fits into the hole. The deeper the ball stem the better. The tighter the fit of everything the better. As little cracks as you can have means the rubber won’t sneak out.
I just bought a 2023 Zx6 and I love it (my first brand spankin' new motorcycle). Ill be watching more of videos for tutorials. Thanks for posting ...🏍😊
This was so helpful for my 2021 zx6r I watched another dude and he skipped all the middle steps so I came to this one God Bless
U didnt shove it all the way down into the stem. U also put the ball on the down side instead of upside, thats why its obstructing ur key hole
Nice bike. Kawasaki always made incredible machines. I just bought a 2018 gsxr 1000R. These super sport bikes are the most fun
Thanks ! I installed my ram mount successfully because of this video :)
Its Wrong, just looked at ram’s official video and the whole thing should go flush not stick out like it does here, hope you didn’t lose your phone. Probably doesn’t matter
Thank you. 🙏🙏
Very clearly explained video. Know I can buy it for my Ninja650.
Do keep up the Good work 🙂
Thanks this really helped 😅😊👍🏾 safe riding
Looks good and solid, I had the one that goes on the handle bar clamp.
Never dropped the phone.
Thanks man for the video. This was extremely helpful
Thanks. That's what I needed to see.
Anyone know why my part can rotate around freely? Not the actually X Grip part, but the ‘Stem kit’ ball part! I’ve tightened it up but it doesn’t seem to get any tighter?
did you find a solution ?
Take the washer off the top from between the rubber and mount and slap a dab of expoxy on it the put it back in, adjust the ball where to want it then let it set to harden up, problem solved
How you gonna take it off once the epoxy sets
Strip the thread in the upper part or the stem . it keeps the screw from spinning in order to pull in the peace that expands it ,just drill it out
i have the same bike model, I'm planning to install the quadlock stem mount, but my bike have steering damper. i dont know if it fit
great vid! awesome quality! subbed
So that cap you remove on my zx 6r it fell off and it rained so now there is water stuck inside.. how do I get rid of that water or will it rust anything up 😞
sick vid man
have you put any dampers on the bike? if so how did it go with the ram stem mount in place?
Cool thanks man I have the same bike
Mine just keeps spinning 😵💫. Doesn’t get tight or anything
Ever figure it out?
@@user-sv1zn9ef6l It’s a defective design and not worth the hassle. Do not buy these. There are others made out of metal that expand as you use a hex to tighten or loosen them. Those are the best ones to use.
@@MrFoxfire510 Can you recommend one? I have this and its pathetic, the ball can still rotate around no matter how much I tighten it, it keeps being loose and doesn't work properly, it's frustrating!
I just got it and same issue. I kept shoving it and trimming it. The rubber instead bulges up over the flat washer pushing it out the fork stem instead of holding it in place
@@Killing4food I had that too, you need to go up in size of the washer, or get oversized one, put a fine thread bolt through it and nut on the back, chuck it in a drill and rotate it against sandpaper to make it smaller, it has to fit almost snug into the stem hole or else the rubber creeps out and loses grip over time.
What rypenof ruler is that ? Do you habe a link on it ?
I like how you skipped the step of putting on the nut 😑
Thank you
How does the vibration effect the camera on the phone. I heard these mounts destroy phone camera
it does on newer iphones
Where do you get it the ram ?
Lol mines just spinning freely
Bro I’ve gone through two already. The black part with grooves doesn’t attach right so it doesn’t tighten when it’s in my bike
get a quad lock much better
@@Colin_Shedaker yeah bro the ram mount didn’t last long at all. Wish I would’ve known more about the quad lock before u wasted money on the ram mount. My quad lock is in the mail coming to me now
@@kaceysilva22 my phone flew off my ram mount when I crashed, phone was smashed to bits 😂
@@kaceysilva22 Enjoy having that fugly, thick case on your phone the 98% of the time you are not riding your bike. QuadLock is for simps.
@@TheUrbanEpicure you’re trippin bro😂😭 how did quad lock hurt you ? 😭I’ve had it for 3 months now and the case doesn’t bother me at all. Bro probably has it on his bicycle talking about the motorcycle mount.
I tested ram xgrip and stem mount on my GSXR. It does the job but ram xgrip is a poorly designed universal phone holder. It holds the phone in place but the stem mount is bad designed (you have to cut yourself the mounting insert to install it into the stem and it self destroys after the first turn of the nut...), does not lock in place and it touches the aluminum stem with the risk of scrathces. The x grip does its job but looks weak and woobly, the rubber holder looks like it is going to break only if you stare at it... I bought it and returned. Better consider other brands such as SP Connect or Quadlock.
No hole in stem…. Any solutions?
change the stem nut?
So basically, a wall anchor for a bike 😅
This was not solid at all. I know you had to take it out and fix it in a big way after this video. Please share how you fixed it
Don’t follow this. Shits wrong af
Dont bother. They are prone to letting phones jump out. Quadlock is a much better product
The times you cut the video infuriate me. It's literally at each crucial part.
Happy New Year! Ride Safe Boss 👊 ✌️🇵🇭
Lord knows you need GPS. I’m talking shit and I still get lost like a noob. Good stuff big homie! Crushing it and expected no less. 👍🏽
Thanks big sexy! You always lead cuz you know we paying tolls two times when I lead.
Man, I need to figure out how to install one on my R6! I want to put a steering damper in that hole. Do you think I even need a steering damper for a R6? I haven't had a speed wobbles so far! Any suggestions? I also hate not being able to see my gps.
Yessir you definitely NEED GPS ASAP I remember our circling rides out east last summer Lol!!! 😅🤣
Never let me lead even with gps.... hahah I’m the worst