Learn AutoCAD for free using this step-by-step AutoCAD tutorial series containing nearly 40 videos with lesson files sourcecad.com/courses/autocad-essentials-course/
MKLTYPE is an unknown command in 2019LT 2020LT and 2021LT How can the "-LINETYPE" command be used to create a linetype with text? I have tried to use the directions in Autodesk Help to no avail.
how do you fix the shape line type for use on circle or arcs? on yours you can see the lines dont join on the circle and I get the same results when making my line also.
I have also 2019 AUTOCAD and it don´t want to take text, only lines. And when i want create arch between lines, it takes only lines. Where is the problem ? Is something bad setted ?
Is there a way to generate a linetype so that when its drawn from point A to B the text/ or pattern would fall in the center, rather than repeated pattern throughout. Any suggestion is highly appreciated.
How can I send this linetype to someone and hope that its work? Because I made linetype, but when i send, thats not working. Is it because of created shape?
thank you for the video, that was usefull but when i finished all you have told, all linetypes has 27 degree rotated. i have to go to text and rewrite it to 0 or 90 degree. how can i solve this?
I've followed the steps and created a rectangle pattern line type, however whenever change it and use said line type, it comes out all wrong including the scale (comes out too big).
when I try to create the line type, upon pressing enter after selecting the objects and naming them, it says it fails. "Comma expected after text string," can you explain why this is?
Dear community, wishing all the best. Does anyone know the solution to the following problem or have arrived at the same problem? When I try to make a simple arrow linetype with a triangle text symbol and a line the triangle or the arrowhead in the linetype is above the line. Thank you in advance for any help.
I tried this and the text became 7x larger for no reason. Then I tried exploding the text to polylines AND lines and it straight up wouldn't recognize the lines that were once text!
Hello everybody. Thank you for the video. Question. Does AutoCAD2019 have a part deployment feature? For example, a bracket from 3mm sheet metal, I want to deploy in one plane. thanks
Learn AutoCAD for free using this step-by-step AutoCAD tutorial series containing nearly 40 videos with lesson files sourcecad.com/courses/autocad-essentials-course/
Should have started here to figure out the linetype thing. THANK YOU!
Thanks a lot man, I ve been struggling with this the whole day
Thanks so much mate. Saved so many hours of mine
MKLTYPE is an unknown command in 2019LT 2020LT and 2021LT
How can the "-LINETYPE" command be used to create a linetype with text?
I have tried to use the directions in Autodesk Help to no avail.
how do you fix the shape line type for use on circle or arcs? on yours you can see the lines dont join on the circle and I get the same results when making my line also.
I have also 2019 AUTOCAD and it don´t want to take text, only lines. And when i want create arch between lines, it takes only lines. Where is the problem ? Is something bad setted ?
Thanks!
Welcome Marc
4:59 does not work. It filters out text and don't want to select it. created line types contain no symbol. AutoCAD 2019
Hi, I hope it's still on time. The following link provides an answer to the problem you have: th-cam.com/video/jGWhv-X1Crg/w-d-xo.html
Is there a way to generate a linetype so that when its drawn from point A to B the text/ or pattern would fall in the center, rather than repeated pattern throughout. Any suggestion is highly appreciated.
After creating a shape. When typing 'shape' for the command and entering the name I game it, it says invalid not found.
Explode first
Why does arrow symbols change to question marks "?" symbol when I explode?
same with mine
@@driftwud1978 ME TOO
How can I send this linetype to someone and hope that its work?
Because I made linetype, but when i send, thats not working.
Is it because of created shape?
thank you for the video, that was usefull but when i finished all you have told, all linetypes has 27 degree rotated. i have to go to text and rewrite it to 0 or 90 degree. how can i solve this?
Ευχαριστούμε!
Thanks Ntina
I've followed the steps and created a rectangle pattern line type, however whenever change it and use said line type, it comes out all wrong including the scale (comes out too big).
Kindly teach about autolisp? It's really helping us
I can't able to create a line type which I required. It's saying that it's a continuous line type.
---//--- this is the line type I needed.
Help me
when I try to create the line type, upon pressing enter after selecting the objects and naming them, it says it fails. "Comma expected after text string," can you explain why this is?
thanks..but doesn´t work :( The line is always created and loaded, but anytime I want to use the line, it appears continuous!!! ....sad :/
Same
Dear community, wishing all the best. Does anyone know the solution to the following problem or have arrived at the same problem? When I try to make a simple arrow linetype with a triangle text symbol and a line the triangle or the arrowhead in the linetype is above the line. Thank you in advance for any help.
when i select objects, which are all symbols autocad says 0 object selected.
Sir this feature are available in AutoCAD 2015 version ?
I created but custom line type are not showed if select object
Very nice video. very helpful to learn how to make line type with shapes. Thank you very much
Many thanks for this video. Does anyone know, at the circle (or curves) the linetype breaks (is not continuous) does anyone now how to solve that?
Look up linetype generation. Turn it on for the polylines you want.
In AutoCAD 2020 LT. It appears that the MKLINETYPE cmd is not available. Is this the case?
it is MKLTYPE however I can't seem to get it to work it breaks it into dots only
Go to Menu Bar (Express ►Tools ► Make Line Type ) Or Use Command MKLTYPE
Thank you so much. Your video is very helpful for me.
The arrow symbols change to question marks when making Single line !!!
thank you very much for this video. I hope you keep on doing tutorial videos. more power!
helpful.. nice.. great... #CivilEngineering.... Keep it up...
very informatic
thank you so much, it was very helpful
I tried this and the text became 7x larger for no reason. Then I tried exploding the text to polylines AND lines and it straight up wouldn't recognize the lines that were once text!
Thank you, extremely helpful video
how can we do this in AutoCAD for Mac ?
thank you, very helpful
doesn't work. mine are too small (i dont see any shapes). LTSCALE is good.
Super sir.. more usefull.. tnq
MKLTYPE CAMMAND IS NOT SUPPORT IN 2017 MAC
um, ok?
Thank you very much!
Thanks 😊
in my line text is going to above the line
Useful, thanks a lot.
I am getting an error.
It's saying that Invalid, that's the continues line type!
What's the reason
mine too
I had the same problem
In 2020 if you use the symbols chart for the symbols, when you explode it you lose the symbol
Hello everybody. Thank you for the video.
Question. Does AutoCAD2019 have a part deployment feature? For example, a bracket from
3mm sheet metal, I want to deploy in one plane. thanks
Thank you!
Sir
How to change setting of autoCAD 2007 from 3d model to 2d classic drawing
click the gear icon on the status bar and change your workspace from the menu that shows up.
Sir where is the gear icon
I don't find it
this is prob autocad 2018
Thanks, it works
Thank you sir
For this video
cant convert multiline text to a single line text :(
explode it
@@mj-pz2su It turns into a diff. font and the arrows become question marks
Thank you Sir
doesn't work as it should for me ;c
it works for me and im on draftsite 2d
YOUR VIDEO IS VERY CLEAR TO UNDERSTAND ABOUT CUSTOMS linetype THANKS ABUL KALAM
Thanks
Good vedio
thanks