ฝัง
- เผยแพร่เมื่อ 13 ก.ค. 2023
- Learn how to clean/service your K&N oiled cotton flat panel filter
Find one for your specific vehicle at www.knfilters.com/air-filters...
Have a question or need assistance? Please contact our Product Specialists at 800-858-3333 or tech@knfilters.com
K&N® is the world's leading manufacturer of washable performance air filters and cold air intake systems.
The world-famous High-Flow Air Filter™ was pioneered by K&N in 1969, and features an innovate design of layered, oiled cotton media to effectively capture dust, dirt, and contaminants-offering top-quality filtration.
Since that time, K&N has grown into a world-class automotive technology company, selling air filters, cabin air filters, oil filters, and air intakes in over ninety countries-with nearly 10,000 unique products for cars, trucks, motorcycles, outdoor equipment, and industrial applications.
With a strong Consumer Protection Pledge and industry leading warranties, K&N commits to quality, reliability, and customer satisfaction.
Whether you’re looking for an air filter upgrade for your Ford Mustang or a new air intake system for your Chevy Silverado you’re sure to find high-quality parts from K&N to propel your vehicle’s performance to the next level. Check out www.knfilters.com to find all of the parts available for your unique application! - บันเทิง
![[UNCUT]ผนึกกำลังล้างบาง "แก๊งค์เชื่อมจิต" จับโป๊ะ ทั้งครอบครัว จ่อฟ้องเอาผิด I คนดังนั่งเคลียร์](http://i.ytimg.com/vi/ZGCs5aVHRZs/mqdefault.jpg)
Been using kn filters for 20 years this year.. Always been my first purchase when I get a new vehicle.. I've seen reviews stating they can be bad or not filter as good.. But I haven't seen anything in my oil samples that would suggest excess dirt is getting into the pistons and oil.. And my vehicles have gone 300k miles no issue.. I clean pretty often since I live in dusty west Texas usually twice a year.
Maintanence is key.. people think it’s plug in and forget 😂
approximately how many kms before cleaning?
@@acc1tester398 I usually clean mine once per year honestly
@acc1tester398 check the filter. Is it dirty? Clean it. Also when you see the filter has lost the oil(red look) time to clean and apply oil layer again.
Warning: do not put to much oil otherwise your maf sensor can be damage.
I just got the Toyota Trd air filter.
I thought it was interesting because Toyota does no longer sell a cleaning kit. But right on the box as an official sticker, that actually says, use K&N cleaner, and oil. I suppose we know now that K&n makes these which is cool.
Very cool indeed 😎!
I have used K&N filters on my LPG powered Subaru and Mercedes 6 Cylinder engines for over 18 years, they totally kill the stuttering caused by LPG, at traffic lights and give a cleaner burn.
Just to calm my nerves, I have always used the foam pre-filters an all vehicles.
Just changing the ones on my Viano and S-Class , the Pre- Filters are worth their weight in Gold, after 60,000 miles the filter itself has very little dirt or wear on them.
Highly recommend their use.
PS, Thanks K&N for totally curing the LPG stutter. I will use nothing else.
Thanks for sharing your story
I'm using subaru forester with lpg, this very helpful for me, thanks for your sharing
How to buy original in oman
Tuning a 2017 DPS6 Ford Fiesta, naturally aspirated 1.6L, with stock air box, and K&N 33-2955. 😉
nice and easy XD
I have a DNA filter on my bike (K&N doesnt make one). Is it alright that I use a K&N kit to clean and oil it?
How long after spraying would you recommend to wait before installing back in the vehicle? Also, would you recommend leaving it oil side up or down during that time?
You want to wait until the oil wicks into the material and creates a consistent color across the entire filter (it should be salmon red). The direction you set the filter to wick is not as important... however we recommend placing the oiled side up so that oil does not drip onto the ground and instead absorbs into the filter. If you have any other questions or concerns please feel free to contact our Product Specialists at 800-858-3333 or tech@knfilters.com
Do i add oil on both sides?
I came here for this! I don’t know either
Make sure to only oil one side of the filter. We generally recommend applying filter oil to the dirty side of the filter. If you need additional assistance please feel free to contact our Product Specialists at 800-858-3333 or tech@knfilters.com.
Hmm.. my reasoning would be that you can get a more even coat if you went from both sides.
No. If you over oil the filter the oil can cover the MAF sensor and throw codes on your dash. Should not oil the inside at all, and only the intake side.
@norakat way i see it. You wana catch the garbage on the side it came from, hence oiling the outside.
What's the dry time recomended before puting the oil
Drying time can vary depending on a number of factors. If the filter is still cool or damp to the touch, or if you test a small amount of oil in the corner of the filter and it runs off (instead of absorbing) you should allow the filter to continue drying. If you have any questions or concerns please feel free to contact our Product Specialists at 800-858-3333 or tech@knfilters.com.
Do you need to oil both side?
Oil one side and make sure its the side that is being demonstrated in the vid.
The dirty side
So i need to soak the filter on the dirty side where all the debry gets? And how many times do i do it
Please contact our Product Specialists at 800-858-3333 or tech@knfilters.com for assistance
do you oil only the dirty side?
Oil only inside so yea the dirty side
After cleaning the filter, when you say dry. Do you mean fully dry? And not a bit damp? But Sahara desert dry?
Yes, the filter media must be completely dry so that the filter oil absorbs into the media. If the filter still feels cool/damp, or you apply a small amount of oil to one of the corners and it runs off then you need to let the filter continue drying. If you have any other questions or are looking for more cleaning tips please feel free to contact our Product Specialists at 800-858-3333 or tech@knfilters.com.
What happenes if we don't oil
@@sergiogreezy8578same and does auto zone or o Riley’s carry these?
How often should thirds filters be cleaned?
The cleaning interval varies depending on your driving conditions. For typical on-road driving you can drive up to 75,000 miles before servicing. If you need help deciding if it's time to clean your filter, please feel free to contact our Product Specialists at 800-858-3333 or tech@knfilters.com
@@KNfilters I am now cleaning my filter after about 40,000 miles of driving throughout southern California and Vegas every now and then.
I do mine every 20,000 miles 🤦
Do it every year as a minimum. Dont let it get too dirty
When the red color turns gray it’s time to clean and re oil.
Mine needs recharging more often than most, it is an open breather on a Harley Davidson so it is in the environment more than in an air box on a car or truck. Don’t let it get too dirty before cleaning and oiling.
What happen if i don't put filter oil
The filter oil is a critical part of the filtration process for K&N oiled cotton filters. Not applying filter oil during the cleaning process will result in reduced performance. If you have any other questions or concerns please contact our Product Specialists at 800-858-3333 or tech@knfilters.com
What the actual hell did you put that filter through
Looks like it got flooded in the swamp from Labyrinth 💀
Is this safe to clean and let into the environment? Are there chemicals in the cleaner that we should be worried about getting on our skin or running into the rain gutters?
K&N Air Filter Cleaner is non-toxic, designed to be environmentally friendly, and does not fall under the regulation of the EPA’s Clean Water Act of 1972. If you have any other questions or concerns please feel free to contact our product specialists at 800-858-3333 or tech@knfilters.com
Brrrruuuuuuh I almost bought a new filter because a mechanic said so . I got my oil changed some car guru said hey man you need to get the kit! I said what kit shows me this . 21$ auto zone compared to $80-$100
Nah Im rich im going to buy a new one 😂
It's ritual. In early spring, and fall time. It's a satisfying thing to clean, instead of waste.....
Can I have your old one?? I'm a poor....lmao
I have seen a billion times to only oil the dirty side. Why doesn’t KN specify this in the instructions or in a video? It would avoid all these questions
When I oil my filter it doesn’t get that nice color, I’m disappointed 😂
Is your oil red? I just used specter sold by auto zone and it was clear. I wanted red too lol. But the specter cleaning kit worked just as well. My filter was dirty, I was hitting mud puddle with my chevy cruze lol
Lmao I used soap and water with a tooth brush and fcked my shi up 😂
Please contact our Product Specialists at 800-858-3333 or tech@knfilters.com for assistance
Okay I got mine and it smells so gross and it was brand new.
Tooo much work rather spend 20 on a new one 😂😂😂
K&N Performance filters ain’t $20 my friend 😂