When the solder melted on the muffler and it fell apart... my first thought was it must be a Ford OEM part. ;) My guess is that the muffler was assembled using electrical solder (melting point around 370F) instead of silver solder which has a melting point from 1200F to 1750F depending on which type is used.
Haha It could be a Ford OEM part haha. Yes it was just normal solder, I plan on doing it with silver solder or brazing, I am investing in a brazing kit and I will redo the mini muffler.
@@AJRestoration consider the any cubic neo, I happened across it when it was for sale on Amazon for $130, I've auto leveled it about 3 months ago and haven't since. I probably do at least one print a day, if a print fails it usually is my own fault by putting in faulty print settings. Been a super reliable printer for me, day and night difference in quality.
*Just Curious ~ why not use crimp on heat-shrink connectors where applicable? It's a cleaner connection and professional looking. Also, could've consolidated the exposed black and white wires using a heat resistant woven sleeve and one hole centered in the base/motor mount. We enjoyed your video nonetheless, thank you.*
Great video. You did a good turning it into a little project. I was hoping you would put a muffler it so it was satisfying to see you slip that in at the end there. Like to see if you can come up with a unique use for it. 👏👏👏
Really nice set-up. When I saw that muffler, I said I hope that is silver solder! I guess it wasn't. Even silver solder may not take the heat. Anyway that is a wonderful thing.
I just googled Nelson brothers sattley engine and I agree it does look like its similar. Also first time I saw one of those engines, would love to own one someday.
Yes, the company does sell mini generators that you can hook up to generate electricity. You can also make one-off a small dc motor. I have a video planned on this topic.
Here you go ....FPVDrone M3 Flight Controller Anti-Vibration Standoffs Fixed Screws Soft Mounting Hardware with Rubber Washer Rings for Naze32 CC3D F3 F4(12Sets)
Running a miniature gas engine allows for the observation and study of internal combustion engine principles on a smaller, more manageable scale. It provides a practical understanding of thermodynamics, fluid dynamics, and mechanical engineering. By examining the performance and behavior of the engine, one can gain insights into the efficiency of combustion processes, the mechanics of reciprocating engines, and the optimization of fuel-air mixtures. This hands-on experience is invaluable for both educational purposes and for fostering a deeper appreciation of the complexities involved in engine design and operation. Did I say enough?
Я ни в коем случае не смогу сделать это сам, здесь нужно много инженерных решений, а я слишком туп для этого. Может разобрать его и собрать заново, а не делать с нуля, может тогда можно будет видео по нему снять. Это было бы прекрасно.
the shroud and overall shape of the engine reminds me of an old briggs and a old kohler
Yeah I'm like "where's the rest of the go kart" 🤣
Tecumseh?
When the solder melted on the muffler and it fell apart... my first thought was it must be a Ford OEM part. ;)
My guess is that the muffler was assembled using electrical solder (melting point around 370F) instead of silver solder which has a melting point from 1200F to 1750F depending on which type is used.
Haha It could be a Ford OEM part haha. Yes it was just normal solder, I plan on doing it with silver solder or brazing, I am investing in a brazing kit and I will redo the mini muffler.
seriously ...that was more relaxing than a bong hit....
Hahaha that is good to hear!
ⓈⓄⓊⓃⒹⓈ ⒷⒺⓉⓉⒺⓇ than I had hoped. Super COoL. Time to build a mini-Taco™mini bike
Now it needs a homemade style go cart to run in
That could be a cool idea!
I thought that too, but good luck finding a small enough centrifugal clutch.
A scale Remote controled go-kart. Great idea, and they already make centrifugal clutches that size for nitro RC cars.
better on a tractor, in Italy we have Lombardini engines like these like LA490
Everyone has this printer I swear :) great starting point, auto leveling on newer models really help tremendously
Yes haha, every beginner has or had this printer.
I want to upgrade to an auto bed leveling printer, I hate the manual bed leveling, to be honest.
@@AJRestoration consider the any cubic neo, I happened across it when it was for sale on Amazon for $130, I've auto leveled it about 3 months ago and haven't since. I probably do at least one print a day, if a print fails it usually is my own fault by putting in faulty print settings. Been a super reliable printer for me, day and night difference in quality.
thats so cool . ima fan of tiny motors engines etc.
I have another cool one coming up.
That’s is soooo sweeet love it great video great build 💪
Glad you like it, more to come!
Greatlittle engine. Like the way the pushrods cross over themselves.
I really enjoyed watching you open the cardboard box at the start, I've never seen anybody open a cardboard box before.
Aw yeah! I'll do it every time then hahaha I'll tag you so you don't miss it. 🙂
Great video. Love the tiny engine. It runs really good
*Just Curious ~ why not use crimp on heat-shrink connectors where applicable? It's a cleaner connection and professional looking. Also, could've consolidated the exposed black and white wires using a heat resistant woven sleeve and one hole centered in the base/motor mount. We enjoyed your video nonetheless, thank you.*
Great video. You did a good turning it into a little project. I was hoping you would put a muffler it so it was satisfying to see you slip that in at the end there. Like to see if you can come up with a unique use for it. 👏👏👏
Really nice set-up. When I saw that muffler, I said I hope that is silver solder! I guess it wasn't. Even silver solder may not take the heat. Anyway that is a wonderful thing.
I enjoyed it!
Nice, now you need 4 insolator dampers mounts for vabration...
I wonder if one could find dampers so small.
101K subscribers!! well done :D :D
🎉🎉🎉🎉
Oh the sound.😊
Perfection! haha
that is beautiful engine
Would be neat if you made a micro recoil starter for it.
Outstanding work 👏👏
Thanks a lot 😊
It will only drive one thing
And that’s my wife
It’ll drive her crazy ❤
i was expecting a fake dc motor-driven model, but this is the real deal!
Oh no haha I would never do that to you guys.
I use this insulators for my rc helicoter fuselages..
Do you have a ebay link or something? I'd like to see what it looks like
Need to use silver solder if you want your exhaust to stay together.just fyi.
Correct I do plan on redoing it but properly.
Looks brand new to me.
That's because it is.
Super!😍🤗
Sounds sweet.
Vraiment sympathique vidéo 🙂
The front of the engine blower housing has me stumped on what style of classic engine it's made to.look like
I think it's supposed to be a Nelson brothers sattley engine.
I just googled Nelson brothers sattley engine and I agree it does look like its similar. Also first time I saw one of those engines, would love to own one someday.
@@AJRestoration one of these days you.will find one for the right price
Definitely a Briggs and Stratton fh
@@alexblough5739 thank you for the info on this video on this engine blower housing
A 12 Volt 5 Amp generator with some sort of governor. Kinda impractical but fun little project.
Very interesting and great video🥰👏👏👏
aThis motor is so cool...But thought might be complete assembly. i want one and have seen video..
It's exceptional build quality. I had so much fun with it.
Exhaust fell of my Honda XL-250 in the woods just like that did , but i never found it .
Do these produce the electricity needed to run? Alternator/stator etc?
Yes, the company does sell mini generators that you can hook up to generate electricity. You can also make one-off a small dc motor. I have a video planned on this topic.
I wonder how it would sound if you used dual pipes on the exhaust????....🤔😁
Like a Harley maybe??...🧐😎👍
I bet it would sound pretty great!
well done...conversion to electric start next and a full water cooled radiator and water pump :)
That would be awesome.
Why ?
Starting engine at 8:58. All before is bullsiting.
Thank you for pointing that out haha, wanna skip all the other bullshit.
What is the tube cast in at the bottom with the black battery cap
Why is the steering wheel on the right?
Creditable Dyffryn freesia 2nd cycle is retrofit but nice engine
Here you go ....FPVDrone M3 Flight Controller Anti-Vibration Standoffs Fixed Screws Soft Mounting Hardware with Rubber Washer Rings for Naze32 CC3D F3 F4(12Sets)
Legend, thank you.
Running it a bit lean but really cool creation.
That's a four-stroke ? I guess it is a four-stroke👍
Good morning from Southeast South Dakota AJ. Dam TH-cam been messing with me. Dam keyboard keeps freezing up
Mine does the same every time I try to comment then 15 seconds later it works
@@Austerationsame here. Question, are you by any chance a Republican? If you get my drift....
I’ve got an Ender 3D printer. What program do you use to make your products?
I'd like this for a model boat.
I knew that solder was going to melt. Try brass..
I don't have the right equipment for brass or silver solder yet, I will invest in it for the future.
Good God, find the oil can, tin man
Fantasies AJ, groot pret my friend
Baie dankie, dis vet pret haha
I have one of those in real life not sure if it starts any more
Really Great Video, I only wish you had made the stand out of a very nice piece of REAL timber! preferably with lots of grain showing!
Why ?
I think i have found a life sized version of that engine sitting in the dirt😅
Do your wires and stroke engine it's in the box
Now put it on dyno !!
Haha that could be cool, but I have no Idea how to dyno something like this.
Why ?
Super cool
Very nice work A.J... did you get better throttle response with or without the muffler?Turned out beautiful...
It was basically the same.
I was going to buy that from engine diy😂
Feel free to use the links in the video and my discount code!
bonjour monsieur sur quel site peut on trouver se petit moteur cordialement
Enjoy your videos, are you making them in a jungle? All sorts of bird and animal background sounds!
Lekker ding
Absoluut haha
Nice 😎😎😎👍👍👍
Hook a small motor to it and use it as a generator.
I have a video like that planned.
I would’ve already lost every one of those tiny nuts and screws
I almost did, had to crawl the floor with a magnet.
Idea Sir.
Figure out a generator set up to run off yer 4 stroke to be able to charge your phone-etc.
Maybe use like one of those wind-up style flash lights.
Love the tiny muffler. Now you need to make it into an itty bitty generator.
Why ?
Time for actual silver solder... LOL.
Correct hahaha
It starts, now what?
What is the point?
A working model ICE
. . . .
If you have to ask, you would not understand.
Running a miniature gas engine allows for the observation and study of internal combustion engine principles on a smaller, more manageable scale. It provides a practical understanding of thermodynamics, fluid dynamics, and mechanical engineering. By examining the performance and behavior of the engine, one can gain insights into the efficiency of combustion processes, the mechanics of reciprocating engines, and the optimization of fuel-air mixtures. This hands-on experience is invaluable for both educational purposes and for fostering a deeper appreciation of the complexities involved in engine design and operation. Did I say enough?
For those who don't understand, no explanation is possible.
For those who do understand, no explanation is necessary.
Run a generator with it and use it to run a model train.
I want to try and hook a little dc motor for a generator and a few LED's
Sweet
If you move a bit more slowly you will stop altogether!
Is that a challenge?
@@AJRestoration😂
We're we supposed to read that instruction book since a cat seems to have a hold of your tongue?
The cat always has my tongue haha. No its just a little preview, some guys like it.
Would be smart to mount the engine down first
❤
Ok, but what can it do?
It would want to be cheap because someone else has had the fun of building it 😢
Cute little engine, dumb wordless unboxing and assembly.
Wordless is my thing if you want words there are many videos out there that has words ;-)
it should run something
villiers
Мда.... Даже коробку правильно откры проблема.... Остальное того же уровня.
amazon
China is making all our dreams come throu
Did you not go to the link? Definately not Chinese!
🥶✊🏻🇷🇺
Clinton
It does resemble a Clinton I agree.
Learn flux my fellow hobbyist
I have to! I did some research and it looks easy enough to learn.
@@AJRestoration Super easy to learn and makes your solder joints so much better.
مرث
over priced item
I actually don't think so. If you take into consideration all the engineering and the quality of the small parts its well worth the money.
carburalo meglio
Ну готовый то двигатель запустить каждый может. А ты попробуй сам его сделай
Я ни в коем случае не смогу сделать это сам, здесь нужно много инженерных решений, а я слишком туп для этого. Может разобрать его и собрать заново, а не делать с нуля, может тогда можно будет видео по нему снять. Это было бы прекрасно.