Nice to see you working on vehicles in a video again, using this as my inspiration to install my new suspension for my Tacoma I just bought…. Never worked on suspension in my life
Well good to see ya on TH-cam again after Ryno ranch. It was always fun to watch y’all working on stuff. And thank you for your service in the military.
Make sure you have the right drill bits for the frame! You need two. One for the bolt to go all the way through and one for the sleeve to slide in. The sleeve drill bit doesn’t go all the way through to the other side. Just far enough to get the sleeve to go it.
Dang that is a huge difference for 4.5in lift. I have a 4in teraflex on my wife's XJ and with 32 on it now, 33s would be kissing the fenders. I did a long arm on my 04 WJ and it is so nice driving it on and off road!!! Subbed!!!🤘🤘🤘
Just so you know for future sake. Those straps are primarily for pulling, not yanking. You can mess up your recovery points and in this case the strap very fast if you try the yanking method with them. You need an actual rope that isn't a static rope to be able to yank the vehicle out. The "issue" with the long arm kit is miniscule compared to the better ride and travel you get out of it each day driving. I'd gladly trade the one or maybe two times I would have to drop the crossmember for how smooth the long arms make the XJ.
Snatch straps are standard. Made for "yanking". I have used snatch straps on HMMWVs, LMTVs and my Jeep XJ. Get the correct straps and you are good to go.
I came real close to unsubscribing yesterday, because you hadn't posted anything. So close! Glad to see you posting and the videos don't need to be all about rehabbing vehicles. Some of us just like you for you.
I didn’t want to cut my fenders up and the extra lift isn’t worth the loss in MPG’s just to fit 33s without any trimming. I did minimal trimming and fit 33s fine
@@squarebody_Tig yea that’s true but I already trimmed my fenders to fit 31s stock without rubbing haha. The problem is where I live you need to be high and have lots of up travel to in the ruts and muskeg.
Detig, respect you alot! Love how the square body turned out. What are you doing with the red Wrangler over at Ryan's? Maybe you could give us an update on the overall fleet; last we saw, you had enough bikes to start a mc by yourself.
Good to see ya in video again! If you don’t mind me asking I plan on starting a TH-cam and was just interested in what gear your using? (Camera and mic?)
Just curious, what is the white film on the bottom of your Jeep? Thinking about a long arm for the Bumble Jeep after I do the SYE and 33's. Also doing shackle relocation brackets (DIY) Nice project. God bless and stay well.
What's up bro , was wondering if you were ever gonna start a channel , should of had Ryan give you a plug and let us know u where starting it up , get u a lil jump start ,
![CAMPปลิ้น | EP.83[2/2] ประสบการณ์ขนหัวลุกจากตำนานวงการผี!](http://i.ytimg.com/vi/T_kFecQw7Ds/mqdefault.jpg)
Dude I just watched the red bent rear truck!!! Yahoo
Nice to see you working on vehicles in a video again, using this as my inspiration to install my new suspension for my Tacoma I just bought…. Never worked on suspension in my life
Hey glad to see you make your own channel. We miss you on Ryan's channel.
Well good to see ya on TH-cam again after Ryno ranch. It was always fun to watch y’all working on stuff. And thank you for your service in the military.
BROOOO!!!!! So stoked to see you!! Pretty solid first video man!! Excited to see your new channel grow!!! 🥳🥳🥳🥳
Love the video. I have the exact same lift I’m getting ready to install. I like the way you just burned through the process and showed how it’s done.
Make sure you have the right drill bits for the frame! You need two. One for the bolt to go all the way through and one for the sleeve to slide in. The sleeve drill bit doesn’t go all the way through to the other side. Just far enough to get the sleeve to go it.
Dang that is a huge difference for 4.5in lift. I have a 4in teraflex on my wife's XJ and with 32 on it now, 33s would be kissing the fenders. I did a long arm on my 04 WJ and it is so nice driving it on and off road!!! Subbed!!!🤘🤘🤘
Glad to see you uploading. Was a fan watching you on rynos channel 🤙🏽
Ohhhh shit here we are ! I have been waiting for “Derrick” to start a channel!
Subscribed! Looking forword to seeing your journey through TH-cam. Congratulations on the first video as well.
Thank you! Hopefully it works out
Great to see you and I plan on watching all your videos keep them coming great job
"ya boy lonely i aint got no friends" sounds like snow and ryan need a surprise trip out there just to sticker that jeep up for old time sake.
Haha like the idea of them coming to see me. Not so much the sticker bomb idea haha
Hell yeah buddy, good to see you back on the big screen 🤘🏻
THE MYTH THE MAN THE LEGEND WE MISS YOU!!!!!
Great to see you try and start, much respect, everyone starts somewhere.
Welcome to TH-cam detig !! Wishing you much success 👍🏼
Glad to see you back on youtube!!!
Good to see you started your channel.
Nice so cool to see u back 😎 on the tube
Just so you know for future sake. Those straps are primarily for pulling, not yanking. You can mess up your recovery points and in this case the strap very fast if you try the yanking method with them. You need an actual rope that isn't a static rope to be able to yank the vehicle out.
The "issue" with the long arm kit is miniscule compared to the better ride and travel you get out of it each day driving. I'd gladly trade the one or maybe two times I would have to drop the crossmember for how smooth the long arms make the XJ.
Snatch straps are standard. Made for "yanking". I have used snatch straps on HMMWVs, LMTVs and my Jeep XJ. Get the correct straps and you are good to go.
There you are!!! Good to see you
Hell yeah! Missed you on Ryan’s channel
Detig! Glad to see you starting a channel! Instant subscribe!
It’s about time Detig.
First 1000 sub , stoked on the new channel your very entertaining !
Saw your story on IG and had to come and support the homie on TH-cam 🤙
Really do appreciate this man!!!!
Just found the new channel can’t wait to see more video
Good to see you again Tig
About time you started doing videos! Excited about the content you will show us! 🤙
Instant subscribe! Miss seeing you on rynos channel. Super stoked. Keep up the good work and you got a long time follower here.
Dood so glad to seeee you again keep them coming
18:55 😂😂😂 hell yeah dude, keep them coming!
I was f-ing dying! Lmao! Oh, sweet XJ too!
Slip yoke eliminator will be a must, don’t want to risk that coming apart on the trail.
It’s on the to do list!
I came real close to unsubscribing yesterday, because you hadn't posted anything. So close! Glad to see you posting and the videos don't need to be all about rehabbing vehicles. Some of us just like you for you.
Hell ya!! Excited to see you get your own channel!!
Good to see u don't forget to tighten ur bolts up
Awesome to see u on your new TH-cam
Love it! Good video, good times. I think you need a Bubba rope or a yank em rope, either way you need a kinetic rope!👍
Stoked to see this pop up!
Sweet rig man been thinking about picking one up. These jeeps are extremely versatile with alot of aftermarket support.
We have missed you man!!
About dam time you have ur own youtube Chanel
Finally got something else to look at. Keep it up 👊
Hell ya dude. Looking forward seein what you got goin on! Respect! 🤘
More of these please! I’m actually looking for a cheaper 4x4 rig, I’m a Toyota guy but their expensive. Thinking the Cherokee is the way to go.
100% these cherokees take a beating and there isn’t much to them. Parts are in every junk yard. If you find one with no rust pull the trigger on it
@@squarebody_Tig in my area it is getting hard to find xj at salvage yard these days
Hell ya !!!! Wooohooo
So glad you’re doing TH-cam bro!
Awesome dude 🤟 I need a garage like that!
Love new parts days!
Jeep lookin sick nice work
Cool Video! But you know, its Jeep, you never have to explain why it's dirty.
LETS F*$%'N GO!!!
SO HYPED!!!
“Now that we put our faith in our lord and savior harbor freight” 💀💀💀 dawg if you ever start doin merch and stickers include this in both 🤣
OG gang here we go!!
Congratulations
the first time always hurts the most
Hahaha
Cheering you on from Canada bud
I will be getting the 4.5 long arm I think as well, thought about the 6.5 but I don’t know witch I want for sure yet!
I didn’t want to cut my fenders up and the extra lift isn’t worth the loss in MPG’s just to fit 33s without any trimming. I did minimal trimming and fit 33s fine
@@squarebody_Tig yea that’s true but I already trimmed my fenders to fit 31s stock without rubbing haha.
The problem is where I live you need to be high and have lots of up travel to in the ruts and muskeg.
Detig, respect you alot! Love how the square body turned out. What are you doing with the red Wrangler over at Ryan's? Maybe you could give us an update on the overall fleet; last we saw, you had enough bikes to start a mc by yourself.
I’m sure I can make that happen
Agreed! Happy to see you on your own Chanel brotha🙌🏻
Get a winch. Self recovery. Lots of trees to pull from. 👍
It’s on the to do list
Make sure it's all tight
Hell ya your frist vid was dope asf
Your back doing it yourself were is your chevy and awesome job
Did do a video on them soon
Sweet found ya. Fun times
I love c video how square body is doing
Been waiting for this! Get dmax ryno down to fl with you for a little bit
Getting the same lift and same size wheels/tires, how much trimming did you have to do?
Atta boy!! Glad you left the fart in there brotha🤣 Jeep turned out killer man🔥🔥
Good to see ya in video again! If you don’t mind me asking I plan on starting a TH-cam and was just interested in what gear your using? (Camera and mic?)
Deddddddddddiiiiiikkkkkkkkkk finally bro
once you have the short arm done but should do a ride quality comparison long vs short on same roads, same speeds
Will do!
tow hooks and skid plates are both rare on an xj
*for sale* haha
Awesome video my channel has a lot of jeep stuff as well, I just subscribed!
Looks like you mihgt need a Matt's Off Road Recovery Rope. lol
Hell yeah love it!!
Hell yeah man! Excited for this! You don’t even have a profile pic yet 😂
Hopefully soon! Haha
Hell yeah brother about time you did it! Can I buy you a creeper lol
I think this is my first time I’ve seen him tighten bolts
That's a nice shop
It ain’t much but it works for what I need
@@squarebody_Tig yes sir
Just curious, what is the white film on the bottom of your Jeep? Thinking about a long arm for the Bumble Jeep after I do the SYE and 33's. Also doing shackle relocation brackets (DIY) Nice project. God bless and stay well.
Finally 💪🏾
👍
Saw your ig post and had to come see what’s up. Glad you started a page, but where is the k10 that thing would have pulled that Jeep out no problem.
Jeep looks great 👍 Which kit is this?
Nice video. I'm trying to make videos also but get shy I guess lol let's see how it goes but keep up buddy was fun seeing you again on the screen.
Good to see you man... So how come you are doing two Jeeps built similarly?
My girlfriend got jealous of all the parts I was ordering and wanted some too haha
What happened to the squarebody
What's up bro , was wondering if you were ever gonna start a channel , should of had Ryan give you a plug and let us know u where starting it up , get u a lil jump start ,
Yellow straps made me laugh that broke so quick that chain is better and stronger
Good looking rig I’m guessing the 4Runner is long gone
I would buy a lift first it makes it a lot easier
I thought it would never happen!
Holy shit
Bro looks good
GO HEAD QUEEN!!
What about the heep you left at rynos house?
Love the content 👌
Good shit Detig!
Good stuff, is that your new house?
right on bro where you are in Florida hope we can hit the trail some time ✌
Jacksonville
@@squarebody_Tig nice jeep Beach is coming hope to see you ✌
@@fiebre4x418 you just might!
What happened to the 4Runner?