WOW!!! I am amazed at the engineering that went into the design of this transmission considering that it was designed in the 1930s!!! What they built was a mechanical analog computer powered by hydraulics!
My father's '53 Chieftain had a transmission leak. The front seal was bad. He told me it had to be replaced twice, but after that, it didn't leak anymore.
Very nice John ! If you are interested there is a great series at Weber Auto by prof. John Kelly ! Just scroll down and there will be about 4 or 5 vids . Cheers !
Great work John. A couple of questions, you do add a ball bearing to the clutch springs, do they have an specific diameter? Does the spring you change come from which transmission model? Thanks
Awesome ! So technically I can use this video tutor to rebuild mine and everything will be exactly the Same? You should know if its off in anyway I'll be lost. This will be my first attempt to rebuild a transmission of any nature. As long as it's exactly like your excellent video I think I can do it except I don't have a few tools I noticed you used. Also knowing I plan to change everything possible in it can you recommend the best full kit supplier that I can order a complete kit from?
Thanks John great work you have obviously done quite a few hydro- matics. I am assembling one from my 1953 Lincoln and can not get any end play on the imput shaft. Did you say that is normal?
Thanks John. Did they vary from year to year or was the engineering that good from the beginning? Also, looking to import a 48 Olds to Aust - is there any asbestos in the clutch discs?
John Dodd where's that number? is it the complete number? International direct call? Or do I dial something first? How much is your kit I'll need an amount. Don't want to waste your time if I'm short the mulah :) . Did you get a chance to see my daughter's build project on that link I sent you?
Hola John Dogg, Tengo 2 transmiciones 1954 y 1955 oldmobile Hydra-Matic, nesesitan ser reparadas, me qustaria saver si usted podria aser ese trabajo para mi?
Okay? Okay? No, no, no! Okay? Okay? No, no, no.... The giant question of the century, "How man are there, eight?" We have a giant mismatch of two people on two different planets.
Hi John, been watching your amazing rebuild. Awesome thank you. The ball bearing mod, where are they from and what size? I'm starting my strip and build soon and getting as much info as I can. I have a 55 Olds dual range tranny
The Pontiac Oldsmobile Cadillac Early Lincolns 1939 Cadillac and Oldsmobile 1947 onwards `Pontiac. The transmission was basically the Same Rolls Royce and Bentley used the Hydramatic 1951 until 1965 1976 Rolls Royce Phantom 6
WOW!!! I am amazed at the engineering that went into the design of this transmission considering that it was designed in the 1930s!!! What they built was a mechanical analog computer powered by hydraulics!
One of the best instructional videos I've seen to date, John Dodds is a folk hero.
Sincere thanks for saving this knowledge on TH-cam. It is just so valuable for people like me.
Excellent video. Thank you!
Thank you all so much for this video, it is very helpful to see such a wonderful hands on how to. Beautiful family!
I’m not an old car owner but this video is good for my brain. Muchas gracias!
Thank you for an incredibly useful video 😎👍... same box as my 52' Cadillac 👍
John, you are a true master. I have much respect for you and your work.
Thank you very much
John Dodd Hi, where you are? I have dynaflow
Thanks for the vid. It helps with my 50 pontiac.
Good Job
Same trans built to race by B&M Trans in California in the 50s and 60s
Visited them on field trip in 63
Lots of memories
LA was a deferent place then
My father's '53 Chieftain had a transmission leak. The front seal was bad. He told me it had to be replaced twice, but after that, it didn't leak anymore.
Very nice John ! If you are interested there is a great series at Weber Auto by prof. John Kelly ! Just scroll down and there will be about 4 or 5 vids . Cheers !
Great work John. A couple of questions, you do add a ball bearing to the clutch springs, do they have an specific diameter? Does the spring you change come from which transmission model? Thanks
Nice work. Hablas muy bien el español John
Awesome ! So technically I can use this video tutor to rebuild mine and everything will be exactly the Same? You should know if its off in anyway I'll be lost. This will be my first attempt to rebuild a transmission of any nature. As long as it's exactly like your excellent video I think I can do it except I don't have a few tools I noticed you used. Also knowing I plan to change everything possible in it can you recommend the best full kit supplier that I can order a complete kit from?
Thanks John great work you have obviously done quite a few hydro- matics. I am assembling one from my 1953 Lincoln and can not get any end play on the imput shaft. Did you say that is normal?
Thanks John. Did they vary from year to year or was the engineering that good from the beginning? Also, looking to import a 48 Olds to Aust - is there any asbestos in the clutch discs?
No asbestos ever. John Dodd.
Do you carry kits for 54 cadillac
That was great! So for your next video grab a 1952 Pontiac Chieftain hydromatic and show me how to rebuild mine please :).
Capitan allen Send me a telephone no and I will take you thru mine is 0034 609 502 932 I have Whatsup too
John Dodd where's that number? is it the complete number? International direct call? Or do I dial something first? How much is your kit I'll need an amount. Don't want to waste your time if I'm short the mulah :) . Did you get a chance to see my daughter's build project on that link I sent you?
Hola John Dogg, Tengo 2 transmiciones 1954 y 1955 oldmobile Hydra-Matic, nesesitan ser reparadas, me qustaria saver si usted podria aser ese trabajo para mi?
I have an 1953 Oldsmobile Hydramatic to rebuild, where can I get a complete rebuild kit?
Your videos will come in usefull. Thanks for the upload
I can supply this Tel 0034 609 502 932. Whats up Viber or leave message and I will telephone you back anywhere in the World.
Is this the same as a 1956 Oldsmobile jetaway???
Okay? Okay? No, no, no! Okay? Okay? No, no, no.... The giant question of the century, "How man are there, eight?" We have a giant mismatch of two people on two different planets.
Dynaflows please
Crikey! So jealous of your memory. What year is this box?
On Rolls Royce and Bentley. That transmission goes back to 1951 until 1976 0n the Roll Royce Phantom 6. 1938 until 1955 Cadillac and Oldsmobile
Hi John, been watching your amazing rebuild. Awesome thank you. The ball bearing mod, where are they from and what size? I'm starting my strip and build soon and getting as much info as I can. I have a 55 Olds dual range tranny
Esta usted en EE.UU?
Yes
Flat head 8 4.4 ltr
The Pontiac Oldsmobile Cadillac Early Lincolns 1939 Cadillac and Oldsmobile 1947 onwards `Pontiac. The transmission was basically the Same Rolls Royce and Bentley used the Hydramatic 1951 until 1965 1976 Rolls Royce Phantom 6