@@GodspeedNRGgamingapple has had it so that you can tap twice on the back of your phone and it opens your camera for like two years, and yet they still added the camera button, they also already had the action button which can also do that it’s just so dumb
The case with pill cutout (like the one you say you like the most) is the best. No accidental taps and no awkward cutout that is too flat. The edge has that smooth transition (the sliding or like a concave thingy) between the cutout and the actual body of the case.
@@demetriushaynes1 bought an apple one a few years ago (the same material as the new one) and it didn’t last long. Especially the sides wear off very fast, although I didn’t used it unusually
I’m big Apple fan and have iPhone in my pocket since the 4s. And I got my first original Apple case today because I like camera button a lot and I want to use it all the time. I tried with a cutout case but it didn’t work for me. I love my “plum” silicone case. It’s beautiful. 💜
I think the cutout creates a deeper gap in your palm. Between the two, if you don’t want to notice it that much, the button overlay is perfectly flush.
I ordered one of those maus cases, they have a button on them so there is no cut out at all. I’d rather have the button there than an exposed pice of frame.
Cut outs suck, the reason why the silicone cases are reasonable is because of this… I rotate between the magbak elite and apple silicone, the only thing missing from the apple silicone is the finger loop, but what I hate about the bag ask is how thick it feels in my hand it’s literally a sensory cycle I go through as I change these cases every other day…. Any case with a cut out sucks bottom line. The capacitive button is so amazing ugh… everyday I work through this first world problem #conundrum ha. Thankfully I got both and can deal with this daily ha😅
My case is a thicker protective case and completely blocks the button. There’s a tab on the side where it is that I just pop open like the ones that block ur charger hole
@ 16 pro is actually really good. I was reluctant on it at first and almost went for the 15 but the 16 was cheaper haha. It’s been really good. I got it when Apple intelligence was available so it’s made it worth it.
That's the Benks ArmorTint If you want to get it, use code Mario15, to get yourself 15% off. I don't get anything for it tbh, just wanted to give you a discount.
@@butterblix the button isn’t the only new thing on the phones, I also went with the 16 pro max. I just don’t find the button useful after using it for a week so I’ve disabled it in the settings. Hence why I want a case without a cutout
@@Toxic_Waste92I think it’s cool, but definitely depends person to person I often pull my phone out to take pictures quick and I love that you can now zoom one handed.
@@ohmygodronnie6484 I for sure see the benefit to it. But I have many reasons for my dislike of it. The biggest issue is that it leaves my phone exposed in that area. I work in road construction painting lines on the road. I’m around chemicals and paints that I don’t want on my device. On top of that we do fabrication at my work which means I’m around metal dust/shavings and we put glass beads on the paint to make it reflective. These beads find any gaps in your case and scratch the crap out of the aluminum and stainless steel bands around the phone. During the first week I had the phone I tested the button out… but I’ve found the cutout to be annoying making griping the phone a pain, I’ve had accidental button pushes and I don’t really find the controls so important to me that I need a button to activate them. Aside from it being a shutter button, I had no real use for it. I think it’s a cool idea and I know there’s a lot of people who will love this addition. On top of that Apple has given users the ability to disable the button in the settings, which I’ve officially done. So it would be nice if case manufactures had an option for a case without the cutout. I’d also like a case without MagSafe as magnets and metal dust aren’t a great combo. I just want to be able to protect my phone.
@ u should search on the internet. So many people are complaining bout the very notorious battery of iphone 16. It drains like 10-15% overnight when it is idle. It drains way too quickly for a smartphone
You can find it here: amzn.to/3ZQKLil
Not working
Most android phones are like that because of the finger print sensor
Most androids since 2015 had the double tap power button to launch the camera
@@GodspeedNRGgamingapple has had it so that you can tap twice on the back of your phone and it opens your camera for like two years, and yet they still added the camera button, they also already had the action button which can also do that it’s just so dumb
that only works like 70% of the time it's u reliable asf talking from experience@@anthonykampe8776
The case with pill cutout (like the one you say you like the most) is the best. No accidental taps and no awkward cutout that is too flat. The edge has that smooth transition (the sliding or like a concave thingy) between the cutout and the actual body of the case.
The best choice this year is the silicon case original Apple. I bought lake green colour for my 16 pro white and is very beautiful combo for me
Good choice!
got the plum one for my desert 16 Pro Max💪🏽
How is it holding up I want to get the ultramarine one for my black 16 pro max but I’ve read that it chips away over time
@@demetriushaynes1 bought an apple one a few years ago (the same material as the new one) and it didn’t last long. Especially the sides wear off very fast, although I didn’t used it unusually
Got lake green and ultramarine for white 16PM and by far best silicone case they’ve done yet
I’m big Apple fan and have iPhone in my pocket since the 4s. And I got my first original Apple case today because I like camera button a lot and I want to use it all the time. I tried with a cutout case but it didn’t work for me. I love my “plum” silicone case. It’s beautiful. 💜
The plum looks so good, i have it too
can the camera capture button be damaged? if yes, then definitely get the case that protects it as well.
I think the cutout creates a deeper gap in your palm. Between the two, if you don’t want to notice it that much, the button overlay is perfectly flush.
Depends if you are right handed or left handed
I ordered one of those maus cases, they have a button on them so there is no cut out at all. I’d rather have the button there than an exposed pice of frame.
The dbrand case is the best
the best is not to have any cover just cover the screen and camera and that is it
Cut outs suck, the reason why the silicone cases are reasonable is because of this… I rotate between the magbak elite and apple silicone, the only thing missing from the apple silicone is the finger loop, but what I hate about the bag ask is how thick it feels in my hand it’s literally a sensory cycle I go through as I change these cases every other day…. Any case with a cut out sucks bottom line. The capacitive button is so amazing ugh… everyday I work through this first world problem #conundrum ha. Thankfully I got both and can deal with this daily ha😅
That’s what I have as well
Mouse case???
I think I prefer a case that just covers over the button.
usung supcase, it has button for it not cutout
iloveit❤
So primium look
My case is a thicker protective case and completely blocks the button. There’s a tab on the side where it is that I just pop open like the ones that block ur charger hole
That seems really inconvenient and just bad design
@@MarioDuch seems logical to me nobody wants or asked for that camera button.
My case is similar to what u show, is it benks?
Yea
What are the brands of cases you list here???
the light grey one is just a random case that I got from a local shop, the other two are from benks
@ cheers
Of all the catouts what's a catout?
I bought and otterbox when i got mine because i always buy an otterbox. Then i saw the camera cut out and i was like WTF DID I DO?!?!
Hahaha, I haven’t tried that one. Is it that bad?
They could've at least added a fingerprint sensor on it, Right now this button so useless. 😞
Hoping for the case that would just cover the damn button!! I don’t need it.
Just get the Apple case with cutout cover
Which is the gray case
I think it’s the bare armour case
what about the dbrand case?
Haven't got my hands on it yet. I heard that they're trying to also add the same thing as Apple. So I want to wait for that.
@@MarioDuchnot good I have heard don’t waste your money
What is that black case
That’s the Benks ArmorPro, if you want I have a discount code for it: Mario15
If people don’t care about the action button then they should have gone with the 15.
15 pro is the best phone iphone 16 pro sucks
@ 16 pro is actually really good. I was reluctant on it at first and almost went for the 15 but the 16 was cheaper haha. It’s been really good. I got it when Apple intelligence was available so it’s made it worth it.
What’s the name of the case on the far right?
That's the Benks ArmorTint
If you want to get it, use code Mario15, to get yourself 15% off. I don't get anything for it tbh, just wanted to give you a discount.
Benks delivery is forever
And if you dont want capture button buy ip15 case
doesn't fit
I literally want a case with no cutout. I hate the button. Only thing I don’t like about the phone
Then buy the iphone 15 😂, the only new thing is the button anyway
@@butterblix the button isn’t the only new thing on the phones, I also went with the 16 pro max. I just don’t find the button useful after using it for a week so I’ve disabled it in the settings. Hence why I want a case without a cutout
@@Toxic_Waste92I think it’s cool, but definitely depends person to person I often pull my phone out to take pictures quick and I love that you can now zoom one handed.
@@ohmygodronnie6484 I for sure see the benefit to it. But I have many reasons for my dislike of it. The biggest issue is that it leaves my phone exposed in that area. I work in road construction painting lines on the road. I’m around chemicals and paints that I don’t want on my device. On top of that we do fabrication at my work which means I’m around metal dust/shavings and we put glass beads on the paint to make it reflective. These beads find any gaps in your case and scratch the crap out of the aluminum and stainless steel bands around the phone.
During the first week I had the phone I tested the button out… but I’ve found the cutout to be annoying making griping the phone a pain, I’ve had accidental button pushes and I don’t really find the controls so important to me that I need a button to activate them. Aside from it being a shutter button, I had no real use for it.
I think it’s a cool idea and I know there’s a lot of people who will love this addition. On top of that Apple has given users the ability to disable the button in the settings, which I’ve officially done. So it would be nice if case manufactures had an option for a case without the cutout. I’d also like a case without MagSafe as magnets and metal dust aren’t a great combo. I just want to be able to protect my phone.
@@butterblixgenerally when buying a new phone you want to have as much time of support as possible
If you doing care for the button, buy a 15
Not the best feature for iphone 16 tbh.
Cut outs are a crap option.
Please talk bout how fking trash the battery on this phone is man. It is my first iphone and the battery is so bad
mine is solid
@ u should search on the internet. So many people are complaining bout the very notorious battery of iphone 16. It drains like 10-15% overnight when it is idle. It drains way too quickly for a smartphone
That’s not a real phone btw
?
what?
The phone looks really small