Bridge rectifier on breadboard practical experiment on breadboard
ฝัง
- เผยแพร่เมื่อ 24 เม.ย. 2022
- #MindsRiot #Rectifier #Bridge
Bridge rectifier is type of full wave rectifier which gives DC output. it uses 4 diodes (1N4007)and one resistor (1K). stepdown transformer can be 12v or 9v.
Our teacher always explains stuff to boys and not to girls. But thanks to you , as always TH-cam is the best solution.❤❤❤. Thank you
Thanks sir tomorrow my exam it was helpful 😊
Good sir
Keep it up 🙂 Sir
Helpfully video
For Practical
Thanks Sir.
❤ from 🇧🇩
Thanks
Thanks A lot sir ☺️
very clear explanation
Thanks!
खूप छान
Welcome to Dr D Y Patil College of Engineering and Innovation varale campus pune
Nice sir
brilliant concept
Thanks
Thanks sir
👍👍 thanks a lot
Welcome
Super sir. You are in 10,000/1 person.
Please do subscribe
In bridge rectifier we don't use negative?
Not getting your question
For Bridge Rectifier , Do we need a Centre tapped Transformer?
Not needed
When I connect the ground of my Rigol oscilloscope probe to the output of the circuit, one of the diodes explodes. I can connect a multimeter to the output of the circuit and see a reasonable voltage. It is sort of explained in this video at 2:48, but I could not solve the problem.
Please check the direction of all diodes and shorting points
thanks a lot🙏
Welcome
Which wire is used for touching and then it shows on cro
It's CRO probe
Yes sirrr
Please do subscribe
Silver ring cathode negative thanks
Sir please upload the pCB var
2nd circuit ne ground apposite side m connect hoga !!!!!!!
what is the use of that red wire
Just to connect wires colour is nothing we can choose any colour of wires we want
What type of Transformers use in this experiment
12-0-12 volt step down transformers
gnd to connect kro
Thank you Sir 😊