I have the solution. The water inside the ESC, you have to take out, and under the protection (a brown paper) you will have a white dust in the circuit. With vinegar you can clean it. My xiaomi already works well. Good luck
oscar torres valdes thx mate! I repaired the scooter one week ago. There was actually a problem with water on the controller in the handlebar. I opened and unscrewed everything and it seemed to me that there was a loose connection. After some wiggle wiggle everything worked like a mysterious ghost. I drove over 25km today and I love this scooter :). Sometimes things can be so easy.
My solution turned out to be pretty simple. Open the battery housing, and disconnect the battery. I left it disconnected over night (to let any residual charge to dissipate and clear the errors) and then reconnected it in the morning. Everything worked fine. I did see a comment about water in the system but the inside wasn't wet (I did take a hair dryer to it for a few minutes just to be sure).
Hello Paul, I recently had encounter this exact same problem which lead on to further side effect like beeping once in a while. What I did was open the battery and hold the reset button for a few second until it bleeps. This should get ride of the confused state on the battery! All the best :D
I'm having the exact same problem as you had. I held down the reset button until it bleeped but now I have a solid blue light. How do I get it back to slowly blinking blue light?
Es el arnés de abajo, el que llega a la controladora ajusta bien el arnés con un poco de silicón o soldando con estaño las terminales que no den continuidad en el multímetro
Hi bro , pls help me .. I already updated my scooter to 1.4.2 ... Later then my scooter is locked .. I can not unlocked the wheel even I type the correct password ... Do u have the same problem like me ? How can u solve that ?
Hello everyone...please help. My scooter actually does the opposite. It just switched its self off and it no longer starts. every time I try and recharge it, it shows that the battery is full (Green LED) but still it won't start and its stressing so much. Anyone who has once had the same problem?
today i had the same exactly problem. well it was not the on off switch it was fine ... otherwise i have silicone protection on it. the problem appears two times. the first time i just dryed everything an it works. the second time it would not go off... so i opened the bottom plate and disconnected the battery and all the connectors . air with hair dryer everywhere. after that i reconnect everything and it works.... omg . xiaomi really dont like rain and humidity .
hello scooter with scooter will help because the problem is that it turns on and nothing happens it does not go to change driving modes and the lights do not work either and the plate at the bottom is red all the time I have v 3 updated and the battery is still flashing blue. I wanted to install some other program to it and I don't know what happened but instead of turning it off it turned off quickly and since then nothing and I don't know what to try anymore.
Got the same Issue , the solution is on the Motherboard near the Batterie. I disconnect all wires ( BATTERIE FIRST!) , unscrew everything and get the Motherboard out. At the Connectorpins was a Waterdamage , i Cleaned evething and built it Back , all Problems are Gone. Hop i can Help someone :)
Hey John. Just look through the comments :). I explained in one, how I solved it. And there is plenty of other helpful information that might help you.
Yo mate.. i have same problem, but different situations, i already lock the scooter by App, now i can’t turn off the scooter & when i try unlocking by App it always “connections fail” did you have solutions? thx anyway..
I have same problem: my xiaomy pro 2 has dashboard on always and I can not turn off. I checked , cleaned the button turn on/off, I disconected the battery and let it a night. Still not solved.
Balázs Herpai I am not really sure what the one guy meant with ESC (Electronic Speed Controller) but for me it is the controller within the handlebar of the scooter (behind the cover where you can see the LEDs indicating the battery charge.
Paul 96 Hi, please help me how can i disassemble the control stem? There was a small screw I took out at the bottom but nothing changed, how can i proceed without braking it? 😁 thanks
James Zerafa yes, I think I did. But until now I had not the time to repair it but I think I know the problem. The controller in the handlebar got contacted with water I guess. So I unmounted the controller board. Now I need some time to unmount the connector from the powerbutton and clean the board and then I need to solder the connector again. Hopefully after this every thing will work again. Otherwise I have to order a new controller board for the handlebar.
Thank you for taking the time to reply. Can you please let me posted on how it goes. I tried to find information on this issue, but like you mentioned, 0 available. My case is very similar i think some water made connection. I am not very practical with scooters and electronics, if you have some guides on how to do your process please share them with me, or if you do a video :) Thanks a lot buddy
James Zerafa yeah no problem. When I have the time I'll make a short video about it where explain everything as good as possible. But like I mentioned a lot: time is running too fast at work :D
@@getsmartereveryday2023 E o problema mai complicata. Sa brick-uit controller-ul la mine în acea perioada. Ma costat 100 de lei sa fac trotineta sa meargă la un Service din București.
@@EAFifaGame controlerul de sus din ghidon ? Eu ma ocup cu instalari dar doar pt mine si am patit la fel ca baiatul cu video doar ca in timp ce faceam instalare de soft uitasem.o alta aplicatie care avea auto conect la trotineta si se oprise procesul ... dupa ceva verificari am vazut ca era aplicatia aceea conectata la trotineta si aplicatia avea bifata blocare trotineta ...inchisesem aplicatia eu dar fiind bifata casuța cu blocatul na ramasese blocata si nu puteam face nimika !!! Ca idee acum am.un soft super si eu avand 60 kg iau lejer 30 maxim in normal mod3 si 24 in eco
@@EAFifaGame bms care se afla jos la baterii se reseteaza rar ai nevoie de resetare sau sus in cobyroller se mai blocheaza butonul ... oricum mi se pare mult 100 de lei... un 75 maxim era ok pt problema ta
wiki.myelectricscooter.org/fr/xiaomi_mijia/xiaomi_mijia_m365 Here you can find lots of explanations and solutions about the scooter in france. Just translate the website and try to understand ;)
I have the solution. The water inside the ESC, you have to take out, and under the protection (a brown paper) you will have a white dust in the circuit. With vinegar you can clean it. My xiaomi already works well.
Good luck
oscar torres valdes thx mate! I repaired the scooter one week ago. There was actually a problem with water on the controller in the handlebar. I opened and unscrewed everything and it seemed to me that there was a loose connection. After some wiggle wiggle everything worked like a mysterious ghost. I drove over 25km today and I love this scooter :). Sometimes things can be so easy.
Paul 96 hi I have the same problems like you, the button cannot be control and always on, how did you solve the problems. Can explain clearly. Thks
anyone has the solution?
Hey, can you make a video showing that?
@@jasonlim208 i have the problem right now, how did you fixed it
My solution turned out to be pretty simple. Open the battery housing, and disconnect the battery. I left it disconnected over night (to let any residual charge to dissipate and clear the errors) and then reconnected it in the morning. Everything worked fine. I did see a comment about water in the system but the inside wasn't wet (I did take a hair dryer to it for a few minutes just to be sure).
Hello Paul, I recently had encounter this exact same problem which lead on to further side effect like beeping once in a while. What I did was open the battery and hold the reset button for a few second until it bleeps. This should get ride of the confused state on the battery! All the best :D
Alex Luk where can I find the reset button?
Thanks for sharing your solution Alex. Will try it.
Sorry for the late reply, is located at the BMS board, it is slot inside the battery!
Hi James! Did what Alex Luk said works? i am experiencing the same problem right now.
I'm having the exact same problem as you had. I held down the reset button until it bleeped but now I have a solid blue light. How do I get it back to slowly blinking blue light?
Es el arnés de abajo, el que llega a la controladora ajusta bien el arnés con un poco de silicón o soldando con estaño las terminales que no den continuidad en el multímetro
Explícame eso mejor por favor
what worked for me is i’ve unplugged for 5 seconds and plugged back the cable in the stem
If anyone has the same problem after reading and trying the solutions giving in the comments, just write me private
I'm having the same problems you had. Did you have to replace the dashboard part?
Paul 96 hay Paul I have hit the bms reset and it shutdown from there I started her up and still will not shut down how can I hit you up
I have the same problem i need to download app or how I can do
Hi bro , pls help me .. I already updated my scooter to 1.4.2 ... Later then my scooter is locked .. I can not unlocked the wheel even I type the correct password ... Do u have the same problem like me ? How can u solve that ?
Andreas Tan hi mate, we have same issues, did you solve the problem?
Me too I need help please how did u fix this issue
Me also are you shot out?
I have the same problem. And it's not because of the button in the dashboard because it work perfect with an other controler.
Hello everyone...please help. My scooter actually does the opposite. It just switched its self off and it no longer starts. every time I try and recharge it, it shows that the battery is full (Green LED) but still it won't start and its stressing so much. Anyone who has once had the same problem?
Connect the Mi Home App and unlock the scooter !
Gonna try this out. Have exactly the same problem. :( Only 2 days of use. If it works out I'll be really grateful.
You can also join here as we have multiple M365 users and we also speak english: facebook.com/groups/296740267399994/
If i locked it in program and i cant turn on flight to conect and unlock it
I can't connect my scooter because the power button needs to be the verificator but nothing happens when I press it
@@dimitursgremory734 did you fix the problem
today i had the same exactly problem. well it was not the on off switch it was fine ... otherwise i have silicone protection on it. the problem appears two times. the first time i just dryed everything an it works. the second time it would not go off... so i opened the bottom plate and disconnected the battery and all the connectors . air with hair dryer everywhere. after that i reconnect everything and it works.... omg . xiaomi really dont like rain and humidity .
The solution on my xiaomi pro 2 scooter was to disconnect the battery and connect after a few minutes.
Hai
My E scooter is not turning on after flashing nee software. How can I turn it on. Please give me feed back, how to solve this issue. Thank you❤
I disconnected all connections but it still the same problem.
So I fixed it by unplugging everything and plugging it back. There was definitely moisture inside my scooter so the warranty was voided anyway
#Paul 96 you must reset batery in site click on button next to disable all cable connect
hello scooter with scooter will help because the problem is that it turns on and nothing happens it does not go to change driving modes and the lights do not work either and the plate at the bottom is red all the time I have v 3 updated and the battery is still flashing blue. I wanted to install some other program to it and I don't know what happened but instead of turning it off it turned off quickly and since then nothing and I don't know what to try anymore.
Hi, i have the same issue, did you fixed yours? And how?
Got the same Issue , the solution is on the Motherboard near the Batterie. I disconnect all wires ( BATTERIE FIRST!) , unscrew everything and get the Motherboard out. At the Connectorpins was a Waterdamage , i Cleaned evething and built it Back , all Problems are Gone. Hop i can Help someone :)
So... how did you solve the problem (as we can see on video)?
Hey John. Just look through the comments :). I explained in one, how I solved it. And there is plenty of other helpful information that might help you.
Yo mate.. i have same problem, but different situations, i already lock the scooter by App, now i can’t turn off the scooter & when i try unlocking by App it always “connections fail” did you have solutions? thx anyway..
Hello, u fixed it? I have the same problem ad u now
Me too🙄☝🏻
Me too
Did you flshed the scooter before?
I have same problem: my xiaomy pro 2 has dashboard on always and I can not turn off.
I checked , cleaned the button turn on/off, I disconected the battery and let it a night.
Still not solved.
Hi All,
Right now I am having the same issue. Please give a feedback what is the solution for this? Thanks a lot 😁
Balázs Herpai hey mate. Just read the comments :).
Paul 96 Hi Paul! I have read them. What is water inside the ESC? 😁 thanks
Balázs Herpai I am not really sure what the one guy meant with ESC (Electronic Speed Controller) but for me it is the controller within the handlebar of the scooter (behind the cover where you can see the LEDs indicating the battery charge.
Paul 96 Hi Paul! Ok, so I should disassemble this part and dry it out. I will give a try thanks 😊
Paul 96 Hi, please help me how can i disassemble the control stem? There was a small screw I took out at the bottom but nothing changed, how can i proceed without braking it? 😁 thanks
Habe ich mit Software
Wie hast es hinbekommen
Hi Paul, did you find any solution to this please? Thanks
James Zerafa yes, I think I did. But until now I had not the time to repair it but I think I know the problem. The controller in the handlebar got contacted with water I guess. So I unmounted the controller board. Now I need some time to unmount the connector from the powerbutton and clean the board and then I need to solder the connector again. Hopefully after this every thing will work again. Otherwise I have to order a new controller board for the handlebar.
Thank you for taking the time to reply. Can you please let me posted on how it goes. I tried to find information on this issue, but like you mentioned, 0 available. My case is very similar i think some water made connection. I am not very practical with scooters and electronics, if you have some guides on how to do your process please share them with me, or if you do a video :) Thanks a lot buddy
James Zerafa yeah no problem. When I have the time I'll make a short video about it where explain everything as good as possible. But like I mentioned a lot: time is running too fast at work :D
Its fine, i can wait. you are my best bet :P
Hey Paul ever fixed? Mine still lays down :P
disconnect battery cable and connect back
Salut. Le ai cu trotinetele? Cu softuri, probleme etc?
@@EAFifaGame ai avut aceiasi problema ?
@@getsmartereveryday2023 E o problema mai complicata. Sa brick-uit controller-ul la mine în acea perioada. Ma costat 100 de lei sa fac trotineta sa meargă la un Service din București.
@@EAFifaGame controlerul de sus din ghidon ? Eu ma ocup cu instalari dar doar pt mine si am patit la fel ca baiatul cu video doar ca in timp ce faceam instalare de soft uitasem.o alta aplicatie care avea auto conect la trotineta si se oprise procesul ... dupa ceva verificari am vazut ca era aplicatia aceea conectata la trotineta si aplicatia avea bifata blocare trotineta ...inchisesem aplicatia eu dar fiind bifata casuța cu blocatul na ramasese blocata si nu puteam face nimika !!! Ca idee acum am.un soft super si eu avand 60 kg iau lejer 30 maxim in normal mod3 si 24 in eco
@@EAFifaGame bms care se afla jos la baterii se reseteaza rar ai nevoie de resetare sau sus in cobyroller se mai blocheaza butonul ... oricum mi se pare mult 100 de lei... un 75 maxim era ok pt problema ta
Salut. Esti roman?
Two words: horrible design. I don't understand why they don't make it IPX7 already.
Two words: budget scooter
Hast es hinbekomme.
No moo k
m.de.aliexpress.com/item/32805940890.html?
Bist deutsch habe das selbe problem bitte hilfen
wiki.myelectricscooter.org/fr/xiaomi_mijia/xiaomi_mijia_m365
Here you can find lots of explanations and solutions about the scooter in france. Just translate the website and try to understand ;)