Cura Test Towers Created Automatically
ฝัง
- เผยแพร่เมื่อ 17 พ.ย. 2022
- Sponsored by www.creality3dofficial.com by Comgrow
Chuck shows you newer plugin for Cura that generates test towers automatically including the GCode. Its a great way to test retraction, temperature, flow and more. He shows you how to find it, how to use it and does an example with ABS on this week's Filament Friday.
Cura ABS Profile (Beta Version): thangs.com/file/504657
Creality Enclosure: amzn.to/3hUiNOS
**** Support the Channel *****************
Financial Support through Patreon:
/ elproducts
Ender 2 Pro:
Creality Official Reseller Comgrow: bit.ly/3tnLuHn
Amazon: amzn.to/3sLuSaW
***** Tools *****
Filament Friday E-Leveler Tool
amzn.to/3ishwM1
Filament Friday Tool Kit:
amzn.to/2MOR00X
PETG used in Video Green Gate 3D Purple Rain:
greengate3d.com/products/purp...
*** All Profiles are for 0.4 Nozzle ***
PETG Best 0.12 Cura Profile
thangs.com/file/363837
PETG Good 0.20 Cura Profile
thangs.com/file/363831
PETG Extra Fast 0.12 Cura Profile
thangs.com/file/363877
PETG Extra Fast 0.20 Cura Profile
thangs.com/file/363859
PETG Extra Fast 0.28 Cura Profile
thangs.com/file/363847
****** PLA Cura Profiles **********
Filament Friday Best (0.12) Cura Profile
thangs.com/file/342708
Filament Friday Good (0.20) Cura Profile
thangs.com/file/342711
Filament Friday Extra Fast (0.20) Cura Profile
thangs.com/file/342738
Filament Friday Extra Fast (0.28) Cura Profile
thangs.com/file/342747
Filament Friday Extra Fast (0.12) Cura Profile
thangs.com/file/342717
Metal Extruder Top: amzn.to/3Ddd7rO
Glass Bed: amzn.to/3L4K63m
Silent Driver Board: amzn.to/3BvbpB5
CRTouch Autolevel Sensor: amzn.to/3qrxeeh
Ender 3 Neo:
Amazon: amzn.to/3TXul2r
Creality3DOfficial Reseller Comgrow: bit.ly/3QDhrEN
Ender 3 V2 Neo:
Amazon: amzn.to/3d0wdGW
Creality3DOfficial Reseller Comgrow: bit.ly/3A4iXbU
***** Tools *****
Filament Friday E-Leveler Tool
amzn.to/3ishwM1
Filament Friday Tool Kit:
amzn.to/2MOR00X
Nozzle Removal Tool:
Palm Ratchet: amzn.to/3u6ncm7
Premium Version: amzn.to/3KZox4t
1/4'' Socket: amzn.to/2OjdHdg
***** Popular Prints:
CHEP Cube Test Print: social.thangs.com/m/21739
CHEP PTFE Cutter Tool: social.thangs.com/m/23507
CHEP Pawn: social.thangs.com/m/29643
***** Creality Ender 3 Pro: *****
Creality Official Reseller Comgrow: bit.ly/2SIMa86
Bundle From MatterHackers: bit.ly/2FuKFpu
***** Creality Ender 3 V2 ******
Amazon: amzn.to/3ioLVsC
Banggood: bit.ly/2MQ5VGM
Creality Official Reseller Comgrow: bit.ly/30gh9OD
***** Creality Ender 3: ******
amzn.to/3fSIISy
Creality Official Reseller Comgrow: bit.ly/2sEthbX
Bundle From MatterHackers: bit.ly/2ZvGLnE
***** Creality Ender 3 Max *****
Creality Official Reseller Comgrow: bit.ly/3oXr3wi
Amazon: amzn.to/3p0oYzB
Direct Support through PayPal donation:
www.paypal.me/elproducts
Support the Channel here and Shop at MatterHackers.com and you automatically donate to the channel at no cost to you:
bit.ly/1Ugcijp
Buy thru this link to Slice Engineering for the Best Hot Ends and get 5% off your purchase:
www.sliceengineering.com/chep
************************************
***Creality Ender 3 Parts/Upgrades ****
Ender 3 Glass Bed:
Amazon: amzn.to/3tYea7m
Replacement Nozzles for CR10/Ender 3:
amzn.to/2m39K1y
X-Axis Tensioner
amzn.to/38BKbYP
Y-Axis Tensioner
amzn.to/2PhOdhi
Chuck's Favorite EZR Extruder:
bit.ly/2rlKCpp
Creality 8-bit Silent Stepper Board: amzn.to/2YPM0Nh
Cap Tubes & Couplings: amzn.to/2Vf8BCf
CR10/Creality Ender 3 Nozzles: amzn.to/2m39K1y
CR10/Ender3 Silicon Heater Block Cover: amzn.to/3sfDG7s
Solder Sleeve Kit: amzn.to/2Pqqngm
Creality Ender 3 Fan Set (24v): amzn.to/38u9aOl
CR-10 Fan Set (12v): amzn.to/2PrcCxK
T-Nuts Kit: amzn.to/2LsQZg8
Screw Kit: amzn.to/2Va8uGK
Temperature Meter Used in Videos: amzn.to/2JpUJOC
Screwdriver set used in Videos: amzn.to/2PbWocM
Creality Ender 3 Upgrade Package (Extruder, Silent Board & Capricorn Tubing): bit.ly/2MNvmcs
Note:
As an Amazon Associate, I earn from qualifying purchases.
****************************************************
Filament Friday Sticker:
Send Self Addressed Stamped Envelope to:
Electronic Products
PO Box 251
Milford, MI 48381
****************************************************
Chuck's Arduino Book:
amzn.to/3tA31JP
Intro animation by Pablo Licari based on Filament Friday Logo by Brian Carter. - แนวปฏิบัติและการใช้ชีวิต
![🔴 [TRỰC TIẾP] Tứ Xuyên (Trung Quốc) VS U20 Thái Lan | Cúp VTV9 - Bình Điền 2024 | JET STUDIO](http://i.ytimg.com/vi/bguJ41PcW0c/mqdefault.jpg)
Great video! I've learned a lot from you and can't tell you how giddy it made me to watch you discuss and use my plugin. I'm glad you found it useful. Thank you!
I got an Ender 2 pro after watching a lot of your Ender 2 videos and I am so happy with it. The print quality is amazing, it fits 95% of the things I want to print. It is a brilliant second printer to get.
Great video as always mate 👍🇦🇺😊
Openscad is free - and a rabbit hole in itself. Might be good to do an episode on it and show off some of the Uber cool customisable things you can print from thingiverse.
This plugin is fantastic! So much convience packed into this one tool.
Awesome this is really great! I followed one of your older videos with the temp tower but the layers where all different heights and it just wasn't going to work for me. But this one works. I looked at the gcode and the preview in Cura and the heights matched and were all consistent. Thanks Chep.
Your results are in line with what I came up with. My ideal temp for ABS (Hatchbox white filament) is 232 C on my Ender 3v2. Glad you decided to do a video on ABS. I love the stuff because it is easy to post-process (sandability, fuse with with acetone). Also not as brittle as PLA and withstands higher temperatures without melting/warping. Hope to see more on your ABS profile.
Thanks for bringing this to our attention! Very useful. Printing one right now, as a matter of fact. 😀
Found this today before seeing you did a video. Very cool that no scripting is required for most of them, super easy. My temp tower was suspiciously good but I was monitoring it so I know the temp was changing per the model. No stringing either from 4-9 on the retract tower (Ender 3 Max). I think this red Monoprice premium PLA is just generally very well behaved.
I need to try out the tower thing now thanks, I love your profiles I only use those I did have to change the temp a little for my PLA that I use but other than that they work awesome.
Thanks Chep. When I changed from the free PLA that came with the printer to the Sunlu PLA+ I did a pre made gcode test tower for my stock Ender 3 Pro with the Marlin 2 firmware. It works best for me at 230C standard 190C kept failing. If I change again I will print another tower. Best wishes.
You can also type the layer number in the little box above the slider.
I have been printing with ABS since the 1st day I got my 1st 3D printer and I have been struggling a lot to get a really good quality print. After some time experimenting, 235C hot end temp is the best. For the curling issue, I've been using binder glue which is far better glue than anything to print with ABS. With all this experience, I've been printing flawless ABS prints to date.
What do you do about deterioration of the PTFE Bowden tube from the high heat.
@@UnCoolDad I haven't had any problems with that so far. If you're having problems with it, changing to a Capricorn Bowden tube will solve it because they don't deteriorate and can withstand more heat
@@savindugiman4130 not had a problem as I have not tried and yet. I'll investigate the Capricorn.
@@savindugiman4130 it seems they do not recommend Capricorn tubes above 240C.
@@UnCoolDad It's well within the hot end temperature I use to print ABS. So it'll work
Glad to see you back.
Thanks for the advice. 👍
That’s AWSOME. Thank You 🙏
Tip to using one of those Creality enclosures. Before printing ABS I pre heat the bed at my desired temp for 30 min before starting a print. By the time you go to start a print the enclosure is much warmer than the ambient air outside it.
Hey CHEP, I print ABS for around the same time as I begun following your channel, 2019, the most important thing for ABS is not so much the enclosure temperature (unless you have an oven-printer that can sustain constant temperatures around 100c) but to avoid drafts of different temperature air, placing the printer in an enclosure, a cupboard or simply covering it with a cardboard box, will make all the difference. Also, you should increase your bed to 90c and turn on your part cooling fan to 60% at 'Regular Fan Speed at Layer = 5'. Lastly, make sure your filament is bone dry, red pigment is one of the worst for absorbing moisture.
Have you experimented with creating Temperature Towers for the K1 or K1 MAX ??
I just did this for my Ender 5 Pro with PLA. I noticed that the '3 layers above' that you mention coincides with the temp drop for the next section. I suppose it takes at least 3 layers to reduce the temp of the hot end. I'm no pro...just an observation. Thanks for the video though...I've been needing this in my life.
once you're done with your test tower, don't forget to deactivate the plugin (click on the big "A" button next to the "slice" button on Cura), or it will mess up your next print temperatures ! I learn it the hard way, lol !
That's awesome!!!
Thank you again.
hi thanks for the good content you provide i was wondering do you have any cura profiles for the v400 as i am struggling to find some thanks inadvance
Great bit of detective work finding the Auto Tower extension....+1
In which order (top to bottom) would you suggest to use this handy tweaking tool?
Hi Chep. I've been using the Filament Friday Extra Fast Cura Profiles for Cura5.1. Thanks a lot.
Could you teach us how to use or update those profiles in the new versions of Cura that are coming out?.
Thank you again.
About using gluestick on the bed, try this: after directly applying the gluestick, use a damp cloth to gently wipe the bed. Do it right and it'll smooth out the glue to get a nicer bottom surface. You don't need globs of gluestick on the bed!
But for ABS I would use a soup made from waste ABS and some acetone, painted onto the surface.
All on glass.
Liked and subbed!! Im pretty new to printing. Im using that extension to try to print a flow tower, but it looks like the flow doesn't change all the way up. But if i print a single line wall on a cube i can get it to be thicker or thinner etc... why would my tower just stay the same?
Ill save the file like you did and check if its changing in the code
I added a little more squish for printing ABS and gluestick but I had to add a 0.42 filet to the bottom of the part to combat elephants foot
I recently bought 2 Ender 2 pros. The specs say the build volume is: 165 x 165 x 180 mm. The cords going to the hotend will only allow mine to reach about 125mm on both machines. Curious to know if you had a similar experience with yours?
using a draft shield has helped me with printing ABS on an ender but I still have to print 1 part at a time.
BUEN VIDEO A QUE VELOCIDAD SE RECOMIENDA HACER LOS TEST?
I dig your ABS profile, it's solid, but that sucker WILL NOT let me switch to .6 nozzle for Arachne printing. I hope it's something you're working on.
chep, where can i get a 4.2.3 board so i can install a bl touch on my ender 2 pro? ive looked everywhere
Did you bring out 5.2 Profiles for Cura? :)
When making a retraction tower you pick the range you want to test, but no temps or speeds. When you print the tower and it comes out perfect on every setting, which do you choose if you didn't have to enter the speeds or temps? I chose a range of 4-9 and got a pretty perfect tower off the bed. 🤔🤔
How do you run openscad with cura so you can do custom towers?
The bridge between the sides of the tower looks horrible. No adhesion and it looks as if the printer in printing in thin air. The sides look great. Any ideas?
god bless you
Thanks for your video mate. Just one question! I used Cura built-in generating temp tower recently and checked its preview to see where are the adjustments of temp at each layer. However while it was printing, the printer’s display(CR-10 V3) didn’t show any changes to temp at any stages! Is that how it’s supposed to be for not showing any change of current temp but it’s actually changing/lowering it when it’s printing?
Mine showed it in the LCD at the bottom.
Depending on the plugin version you have installed, you may need to select the "Enable LCD Messages" option in the plugin's settings menu. Some printers don't handle the M117 gcode command used to send messages to the LCD.
Your enclosure is probably too big. The air gap above the printer probably takes too long to heat. That's been my experience with enclosures.
Also of note with ABS is print surface. I have problems with flexible build plates allowing the corners to peal up the build surface even if you get good adhesion. I print on PEI stuck on top of glass for my abs prints for best results. Most of my repeat print programs have mickey mouse ears in the corners as well.
I want to say I like your videos, but I have had little success with your profiles. I have the exact same printer, and my prints fails most of the time when using them, but work fine with the generic ender 3 profile. Not sure why? Could be the filament I am using. Do you always use the same brand filament when testing your profiles? Or it could be just me, or where I live(temps etc).
I had the opposite effect for my printer lol. I couldnt tweak default profiles or custom ones to get mine to run right. I put his profile in, adjusted flow and temps, and then it solved all of my problems.
Hey Chuck, I've never printed ABS, just curious why you wouldn't want part cooling? Thx.
Abs can be temperamental with warping and splitting layers when it cools down too quickly.
@@imst4722 Thank you for the info!
do u always need an encloser for abs filament ?
@numpty9989 really u don’t think so
It helps a lot to prevent cracking as well but smaller prints need it less.
👍🏻👍🏻
Why cooling fan off? Is that an ABS-specific setting?
Yes, abs doesn't like the fan.
will these towers alter the temp mid print?
It does
Every time it starts a new bridge it will automatically lower the temp by 5 degrees.
But my ABS+ temperature range is 220-260, not 210-250. Is it possible to change the range?
Late answer for you so I don't know if it will help, but if you want the upper 10C just have it start at 260 instead of 250 while doing the rest the same. You can just remember the temp difference when looking at results.
No OpenSCAD?! What?! You can use it to modify models without scripting (coding) anything. The Gridfinity organization system is a good example. I can open the model, change the size of a box and other features, then export as .stl. EasyPeasy.
Hey Chuck,
one question, offtopic: I use your profiles (PLA & PETG) for a few weeks now and they are very handy, I love them. But I have a question: Why are you using combining mode? I think it is not very useful for default and want to hear your idea bind this.
Thanks!
Is it the same if you use petg filiment?
There is a PETG tower for that.
i dont see the plugin in marketplace..... have version 4.12.1 of cura.
Unfortunately, the plugin requires Cura version 4.13.0 or higher.
If you live local to Micro-Center, they have the ender 3 pro for $99 with coupon. In store only.
Why did Cura 5.2 eliminate version 4’s calibration shapes and settings?! Why did a newer version move backwards in features?
Pls make a video one cre xz conversation on ender 3 without any othere extera parts, just with parts that comes with printer only belts u can buy, that wold be Awasom video🔥😍💕👍
ABS sticks best on glass with a abs slurry
Just printed a retraction tower and same stringing in all values 👎
Try this. th-cam.com/video/OG7We83M5gc/w-d-xo.html
i believe creality does oh you somethin , didnt THEY rip off your stl
Looks like your bed leveling tool is copied on Amazon under smartbot they call it a GLA10
@@johnroberts9014 It is a very old idea, no one is stealing it.
Ｐ𝐫Ｏ𝕞Ｏ𝓢ｍ