Hi, thank you for the comment. I don’t sell them at the moment, maybe in the future I can improve the design and source the hardware then I can setup a shop. At the moment you can download the 3d files, pint them yourself or outsource the printing process.
Hello thank you for your comment, unfortunately I haven’t done that yet cause I had to move to a new country and my new printer didn’t arrive yet, hopefully in the future I will do it and share it.
@@LureLogicOfficial thanks for your reply, i downloaded the files and printed only few critical parts like the turner bearing nut and the turner bearing screw, i did folow the print instructions on the dowload page bur got dificulties to assemble them, in order to get them fit i needed to do some sandpaper work on the edges. You may want to check with this and maybe add like 1mm fillets so they easily fit to eachother. I also did try to print the small parts with 0.2 layer hight but it didnt work, so as you suggested 0.1 works just fine. 👍
@@sportfishintgturkeyWeird, on my ender 3 it worked just fine. I might post an update later cause I moved to a mew country, got a new printer, and now using UV resin. But I still need the turner to level the resin before curing it with UV light.
Hi. First, thanks for your job. And talk you that I maked the device and I’m happy in a 95%. Thanks one more. I’ve some feedback to you, if you are interested in it let me know. I think you can improve a little the device. Thanks. Thanks. Thanks
Thanks for the lovely comment, I will be more than happy to discuss it, you can join my discord server and we can talk about it there. discord.gg/DT9bheQM9E
I would have recommended outsourcing it to a company like JLCPCB or others like it but some parts require you to pause the print and embed other parts inside of it. So the person printing must have the bearings on hand.
Hi. Great Job. Can I buy one of those any where? Thanks
Hi, thank you for the comment. I don’t sell them at the moment, maybe in the future I can improve the design and source the hardware then I can setup a shop. At the moment you can download the 3d files, pint them yourself or outsource the printing process.
Thanks
💪💪💪
Hi and greetings from Turkey, this is great design indeed, did you get any chance to develop it to hold 2 or more lures?
Hello thank you for your comment, unfortunately I haven’t done that yet cause I had to move to a new country and my new printer didn’t arrive yet, hopefully in the future I will do it and share it.
@@LureLogicOfficial thanks for your reply, i downloaded the files and printed only few critical parts like the turner bearing nut and the turner bearing screw, i did folow the print instructions on the dowload page bur got dificulties to assemble them, in order to get them fit i needed to do some sandpaper work on the edges. You may want to check with this and maybe add like 1mm fillets so they easily fit to eachother. I also did try to print the small parts with 0.2 layer hight but it didnt work, so as you suggested 0.1 works just fine. 👍
@@sportfishintgturkeyWeird, on my ender 3 it worked just fine. I might post an update later cause I moved to a mew country, got a new printer, and now using UV resin. But I still need the turner to level the resin before curing it with UV light.
I just noticed that I replied to you from my other channel 😂
What is the max length lure that you can spin...thank you...
200mm which is about 7.8 Inches
Hi. First, thanks for your job. And talk you that I maked the device and I’m happy in a 95%. Thanks one more. I’ve some feedback to you, if you are interested in it let me know. I think you can improve a little the device.
Thanks. Thanks. Thanks
Thanks for the lovely comment, I will be more than happy to discuss it, you can join my discord server and we can talk about it there. discord.gg/DT9bheQM9E
I don't have a 3d printer, but....would I be able to buy a turner system.from you?
Sorry, but I don't sell them, there are multiple 3D printing groups on Facebook, I'm sure lots of people there provide printing services.
I would have recommended outsourcing it to a company like JLCPCB or others like it but some parts require you to pause the print and embed other parts inside of it. So the person printing must have the bearings on hand.
Do you sell those and if so how much because I don’t have a printer
Sorry, but I don't sell them
👏 *Promosm*