How To: Stance and Lower your model kit
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- I Was not paid to say or do anything. These are my honest opinions uncensored.
www.zero-paints...
Visit my webshop: www.thescalemo...
Want to support this channel, why not become a patron!
www.patreon.co...
Want to know more about the way patreon works?
• Video
The Airbrush I use is a Harder & Steenbeck 2 in 1 EVO with a 0,4mm needle attached to a EuroTech 20A compressor boosting 2,4BAR(35PSI) of air pressure through the gun.
Or a Harder & Steenbeck Evolution Silverline with a 0,2mm needle attached to a EuroTech 20A compressor boosting 1BAR(20PSI) of air pressure through the gun.
www.harder-airb...
www.harder-airb...
www.harder-airb...
The Spray booth i use is a Sparmax SB-88
Please visit SPARMAX store (North America).
store.sparmaxai...
Please visit SPARMAX store (Europe).
www.sparmaxair.de/
www.sparmaxair.de/
You can directly contact the SPARMAX team for more information about product availability & sales @
info@sparmaxair.com
I have also made my own home made spray booth:
• How To: Build a Spray ...
In my video's I'm showing all sorts of tips and trick about model car building. I do tutorials( how to's ),model kit builds,unboxing reviews and all sorts of other scale model related stuff.
If you have any suggestions or questions at all just post a comment or email me at thescalemodelingchannel@gmail.com
Also don't forget to like us on Facebook for project updates and news.
thescalemodelingchannel
Music copyright ® by TH-cam Audio Library
Wow I never thought of this way, but I do it a different way, I thought I'd share it with you and everyone in the comments.
This technique works if you are using female wheels to a tamiya kit, or any kit that has a little pin on the wheels to connect them.
First, find the brakes you'll use. Doesn't matter if they're stock or custom, as long as you can make a hole in it, itll work. You then enlarge the hole until the brake can slide over the female nub, then to lower it you just glue the wheels higher up and to camber it, you get that suspension price that you'll connect to the wheel, and file it at an angle so when you glue the wheel, it glues at an angle.
This technique works with something like aoshima wheels onto a tamiya kit
This is my way of lowering or adding camber to a model car kit, the front is similar except usually with tamiya kits, the piece that glued to the wheels is separate because they need to turn, you basically do the same thing with that piece and file it an angle.
Holy shit the front camber is genius. Cant wait for the final build
This is helpfull as i am in the preparation phase of a 1967 vw beetle from hasegawa never done anything from this company but the body painted upbl nice and it looks pretty quality so well see how it works
I have a question, I hope you're reading this. How do I make the wheelbase wider to fit wide bodykit cars..I'm planning on making custom widebody on my tamiya gr supra. Thanks.
Now that mystery (to me) revealed. Thank you. so simple and the advantage of not having to scratch build a bunch of parts 👍👍👍
Any ideas the best way to lower a model truck. Currently working on a modified peterbilt.
Great video now I can stance my new R33 thanks a bunch such a simple video but gotta love
Daniel Otero make a video when it's done so I can see the stance
Michael Takaichi I am not sure about a video but I will post up or send you some pictures most likely I will put it up on Scaledworld.net
i had a Revell BMW 318i kit it came with a rod that was cut in half and a rubber hose you slid shafts into this made shafts move at different rates at center. It created the desired negative rear camber. I'd imagine the same effect can be done to front suspension. Feel free to implement. Its Revell idea, I'm just sharing
Just one question,when you bend the control arm upwards to the hubs at the front, do you apply any kind of heat at all to it ? I'm a bit worried if it will break on the kits. Thanks for sharing.
+Seekers Powerbuild Motor Mechanic heating them is a good idea if you don’t want to run the risk of breaking them.
Will this work on Fujimi model kits? I've ordered my first kit from Fujimi a Honda Civic Type R (EP3).
Since you cut and sanded the top of the shocks you should have sanded them off and made your own using jewelry wire to really give it a nice look.
i've seen several videos of this process and not one shows what the final result looks like
th-cam.com/play/PLml5qXMU9oOR_2y1gms_i6lFH4-EHSmfP.html
what brand and size is this car?
Tamiya 1/24
I liked the credits
Are you going to cut and buff the car
Nope
What if the model uses leaf springs in the rear?
Do it like it´s done on the full scale cars. Cut the rear axle from the leaf springs, make a pair of lowering blocks and insert them between the axle and the spring.
+ Joakim Karlsson Thanks a lot, that really helps!
You could just remove the springs or make a new shorter one.
Nice Thanks for this Tom :D
How to lowering and stance mazda rx7 tamiya 😞 help pls 😞
+MrShg the same way as this one
Nope 😞
MrShg yep
Are you on instagram?
+Calvin MTechnica nope
Calvin MTechnica he is now
Oh hey, pop up :)
Can I do this with a real car? xD
What about Aoshima cars
pretty much the same
The Scalemodeling Channel Okay but what if I don't have a drill you do?
use an exacto blade to make the hole, improvise. Don;t be affraid to try ;)
The Scalemodeling Channel I'm afraid that I will break something :/
The Scalemodeling Channel Update my custom rims won't fit
I just make the whole suspension, check it out
can i have it
😍😍😍😍😍
круто!
Dang it 21 comments
Succinctly put.
Fucken ricers😂😂 geen haat!
R.B.V. fishingteam yeah but he's no ricer