How To Replace Blend Door Actuator 2007-17 Jeep Wrangler
ฝัง
- เผยแพร่เมื่อ 10 ม.ค. 2022
- Buy Now!
New Temperature Blend Door Actuator from 1AAuto.com 1aau.to/ia/1AHCM00011
Watch this video to learn how to install a brand new TRQ blend door actuator in your 2007-17 Jeep Wrangler.
• Check here for more videos on the 2006-18 Jeep Wrangler: • Jeep Wrangler 2007-201...
This process should be similar on the following vehicles:
2007 Jeep Wrangler
2008 Jeep Wrangler
2009 Jeep Wrangler
2010 Jeep Wrangler
2011 Jeep Wrangler
2012 Jeep Wrangler
2013 Jeep Wrangler
2014 Jeep Wrangler
2015 Jeep Wrangler
2016 Jeep Wrangler
2017 Jeep Wrangler
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oa/1AXAA00013
• 10mm Socket 1aau.to/oa/1AXAA00017
• 8mm Socket 1aau.to/oa/1AXAA00017
• Trim Tool Set 1aau.to/oa/1AXXX00006
• Needle nose pliers 1aau.to/oa/1AXAA00051
• Needle nose pliers 1aau.to/oa/1AXAA00052
• Ratchet 1aau.to/oa/1AXAA00016
Subscribe: / @trq
Check out our playlist:
Jeep Wrangler 2007-2018 3rd Generation JK: • Jeep Wrangler 2007-201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
One thing I always did when I was a tech. Once I got a component installed I tested the new component before reinstalling all the brackets and trim pieces. You would be surprised how many “new” parts are faulty.
I'm repairing my wife's 12 wrangler, this was perfect. You guided us with everything we needed to know. Thank you.
This is the right video!!! 2014 JKU, done in 30 minutes, $30, with one stop to rewatch one part. Thanks for posting.
+Doug Busey Thanks for the feedback! 1aau.to/m/Shop-TRQ
After watching your video I replaced it in about 2 hours. Thank you for the video. You are the man!!
Great camera work and instruction. I’m allot more comfortable about this repair now. Thank you.
Excellent video! Thanks for making it.
You can also pull that floor vent off it pops out and you have a clear view of everything it made the job alot easier for me
How it doesn’t seem to want to move for me
same here. does not move, got half off. believe me i am pulling
Thanks - took 40mins and 3 cramped fingers 👍
Great video! Thanks so much.
I can’t stand these actuators as I had them break in all my GM cars and now have had one break in my wrangler. They’re just annoying to replace. At least this one is accessible somewhat.
Thank you for your time and video ,your are best 👍👍👍👍👍🍺😎
How do you do the one behind the glovebox
Very helpful thank you
Great video but I might add it doesn’t appear to be 2007-2017 as I have a 2011 and it’s a little different.
This is a beast of a job but great video . Thank you .
is that the side you replace if you hear from right side? great video
Very helpful just replaced after watching
What if the missing tooth doesn’t match up exactly with the old actuator?
Can anybody tell what size the 3 screws are that hold the actuator in? I’ve lost mine and I’m having a time trying to figure out what size screws I need for it!!
The component at 2:35 which you disconnected. What is that component called/for?
I replaced mine with your help about a year ago and then I noticed that now the Ac is either Cold or very Hot. No in between… I ordered another actuator and have not installed yet. I'm hoping it is bad and will work with the new one.
The suck factor was high on this project. I did the drivers side today. I also took apart the faulty actuator and found no feed back position sensor or potentiometer. It was just a motor and gears. Therefore it must not matter where the arm is as long as the pin is in the right slot. Position feedback must be coming from somewhere else.
What's caused for this replacement beside its not working? Any symptoms?
Does anyone know what the actuator is called that this actuator connects too?? The one with the track that the arm runs along
Did you remove the seat?
Is this the same for 08?
Just letting y’all know this does not look the same on a 2009 Jeep Wrangler
This isn't the actuator that's directly to the left when you pull the glove box is it?
No
Mien is a 2013 jeep wrangler were would mien be at
My 07 has old-style vent buttons. Will the other parts be different as well or is everything the same behind the dash?
i’ve noticed it’s all different
2012 different as well
My hands are too damned big to get back there. How do you remove that metal bracket that the plate was mounted on?
Yeah definitely not the same on a 2009 Jeep JK that is nowhere to be seen
This is not what the steps are for a 2013 ultimate, the clearances are way different and you have to remove additional brackets and the vent cover to get access. There are better videos. Trying to change the actuator after watching this, it was incredibly frustrating. Go elsewhere.
Just payed over $400 at doge dealer 🤦🏻♂️🤦🏻♂️🤦🏻♂️
Why are you wearing latex gloves on a dry heater box? Lol.
How many time can you say "wanna go ahead" in one video?
Say module one more time MF!!! 5:27
Terrible instructions
This video is way too confusing, he thinks everyone knows it like he does, no! There’s easier videos on here.