I have an amana air condenser 2 ton 16 deer. My thermostat setting is 1 stage cooling. Should I change it to 2 stage cooling. I don’t have heating. Thanks.
I have since found out that when i have my TSAT control through a EIM, the add option disappears. Should i be using my EIM to connect the temperature sensor?
@@D2DNYAC My unit doesn't have the "add device" option either. From what I can determine, the Wi-Fi VisionPro 8000 (TH8321WF1001) is not compatible with Redlink. I wanted to add a wireless sensor (C7189R1004) but my TH8321WF1001 will not work with redlink wireless sensors. Is it possible to add a EMI (equipment interface module) to get them to talk with each other, or do I need to replace my thermostat?
@@mbatech I am trying to work this out as well. What I can find the add devices (which I also don’t have) can possibly only be accessed using an EIM through the thermostat. If you have a True zone control panel. (Which I do have HZ322) the adding needs to be done on the control panel itself. As the panel is the host . Will be trying this as soon as we get a mild day and I don’t freeze my butt off in the attic. lol
![[ENGSUB] UNPRODUCTIVE DAY ใช้ชีวิต (เปื่อยๆ) ด้วยกัน 1 วัน! | OUROAD CLOSEFRiEND SS2 EP.9](http://i.ytimg.com/vi/pyYKZ3kra9w/mqdefault.jpg)
Thank you for this video! It really helped me 👍
Thanks for watching
Thank you for this video. you are awesome this video helped me out a lot. I Appreciate it greatly
Thanks for watching
Thank you for the video, please can you tell me why Remote Wireless Sensor is with Red Light and not want to connect with Thermosta?
Did try replacing the batteries?
Great Video. I couldnt find this info on Honeywell's site. Appreciate it!
Thanks for stopping by
@QORTON yes its ridiculous that the honeywell website is so terrible trying to figure this out!
What model of this thermostat that can connect to remote temp sensor? I got TH8321WF1001 but cant find the wireless manager option
Wifi version isn't compatible with wireless sensors
Hey does the sensor green light stay on all the time after adding it
No
I have an amana air condenser 2 ton 16 deer. My thermostat setting is 1 stage cooling. Should I change it to 2 stage cooling. I don’t have heating. Thanks.
No
How do I reset after installing new battery on sensor? Please help thanks
This should be an automatic process after replacing battery if not reboot thermostat
What’s the range distance (wirelessly) from the sensor to the thermostat ?
In open space it gets about 5 miles as per Honeywell
@@D2DNYAC thank you sir
Thank you so much for this video!
Thank you for stopping by.
why do we need the internet gatWAY if the wifi will be available?
This model don't have a built-in wifi radio it has redlink radio only hence the gateway!
please give me a Honeywell Thermostat model that would also control a dehumidifier in the system
Can you please provide link to previous video
HONEYWELL THERMOSTATS INSTALLATION AND SETUP: th-cam.com/play/PLI0CUXah6YNlr2XxB5m98uWz7fZh1Mpqu.html
@@D2DNYAC thank you so much. I should be able connect mhk2 tsats to RedLink gateway, right ?
What to do if the sensor is not connecting to the thermostat I have two sensor but only one connects.
You are doing something wrong it's a simple and straightforward process please double check your steps re watch videos
My t.stat don't wanna see the old sensor so Imma change it too lol
Is the battery good?
What red light orange light mean
Never seen that happened however a red light flashing means low battery
My unit doesn’t have the “add device” option. Is that normal?
I have since found out that when i have my TSAT control through a EIM, the add option disappears. Should i be using my EIM to connect the temperature sensor?
I never did that setup before, however if it's possible to sink sensors to EIM then do it and see the results
Stop snaking your lips damn
Stop being a bitch. Damn
My unit doesn’t have the “add device” option. Is that normal?
not if you did the exact steps i did for adding a redlink device
@@D2DNYAC My unit doesn't have the "add device" option either. From what I can determine, the Wi-Fi VisionPro 8000 (TH8321WF1001) is not compatible with Redlink. I wanted to add a wireless sensor (C7189R1004) but my TH8321WF1001 will not work with redlink wireless sensors. Is it possible to add a EMI (equipment interface module) to get them to talk with each other, or do I need to replace my thermostat?
The new video link here will help
HONEYWELL VISION PRO 8000 REDLINK THERMOSTAT | GATEWAY | SENSOR
th-cam.com/video/-MYPvpdRsvI/w-d-xo.html
@@litho7 I have the same problem. Can't add the device. Did you ever figure out a solution?
@@mbatech I am trying to work this out as well. What I can find the add devices (which I also don’t have) can possibly only be accessed using an EIM through the thermostat. If you have a True zone control panel. (Which I do have HZ322) the adding needs to be done on the control panel itself. As the panel is the host . Will be trying this as soon as we get a mild day and I don’t freeze my butt off in the attic. lol