78 GMC Jimmy Revival! & Lift!
ฝัง
- เผยแพร่เมื่อ 27 ม.ค. 2023
- Found myself a 1978 GMC jimmy (k5 blazer) that’s been sitting for years! Decided to giver her a new life! Let’s see if we can get it running, driving, lifted, & saved! She gets a 6in lift on 35s by then end & I sure had to work for it! Took a turd and made her a ripper!
Follow me on Facebook:
Two Wheel Toys
Tandt Trading
Taz Taryn Zinszer
Instagram:
@taz_two_wheel_toys
@two_wheel_toys
Like, share, subscribe, all that good stuff that helps me be successful! It really helps 🤙🏻
#5kblazer #squarebody #chevy #revival - ยานยนต์และพาหนะ
![NONT TANONT - ดอกไม้ที่รอฝน (spring) - Reimagined [Live Session]](http://i.ytimg.com/vi/nY2PsFZFEOg/mqdefault.jpg)
Now I feel better!
My husband bought a 1974 Chevy Suburban K20 4x4, and I thought it looked a little rough, but it runs and drives. He got a title, and he only paid 2300 delivered!
Ok, and a lot less rust than this one.
Heck yea that’s a deal!
Had an 84 Blazer way back when. I dont think there is one thing I did not replace at one point or another. Fun and easy to work on. I miss the days of simpler vehicles. Best of luck with her.
Ohhh yea nowadays it’s all about plastic and computers, I’ll stick to the classics lol
I have an 84 k5 now. 454, 10" lift... I love it
That's awesome great video thanks for you for sharing. Keep those sweet old rides on the road Old school always rules.
Thank you! I really appreciate the encouragement!
That laugh.
Ohhhh yea I get ALOT of comments about it lol kinda my staple 😅
Nice build
Pretty nice lookin rig when it's washed up. Not that it matters but it's referred to as "full time 4 whl drive" . And those front leaf springs ain't bent backwards. That's how they are supposed to be.
Haha you know I had an older gentleman tell me the same thing before I lifted it and I guess your right bc with stock tires if they were bent any different it would be too tall.
I feel you should always do "how to". There could be guys/ gals that don't know how.
Very true! I just want the videos to be entertaining and not long drawn out how to videos but I think I’m going to do a mix of both
@@twowheeltoys Cheif, I want you to name it Cheif❤
That’s already my trucks name lol
Who cares no one cares abt the alphabet community
I work on 5 k5 blazers on my channel and I do what I can for how too stuff... my 84 has 10" lift with 454
When he said I'm selling it, I was like omg, the guy sounds like Patrick from sponge Bob...I was so stocked for him in the beginning..., dang
Yea I really wanted to build myself a stunt Harley lol which I’ll have that video done very soon!
Put a LS in it and it will last forever. Dont go wast money on intake and stuff use the factor intake on LS and you will have a nice truck. Weld up the front supports that go to the fire wall and body mount. They get rusty and sag down. Use something to under body also the back of them rust out by the tailgate hindge and sag also. Other than that you got a beautiful Blazer. They go everywhere in the woods with the short wheelbase also. The look cool lifted with nice wheel and tires
I actually have a fully built blazer at the moment with a 496 big block dual transfer cases 1 tons and I’m making a video on that right now
Dang I'd buy it!!
Its in real good shape
Damn, I was excited for a blazer build series
Oh I’ll do more don’t worry!
Already had a cowl hood. Awesome
Thought the same thing! Lol
Great job!!
Thank you I really appreciate the encouragement!
Looks like a good solid start. I have 5 k5 blazers right now. That is an odd place for them to rust with the rest of the body looking in good shape
My first truck I ever had was a 79K 5 Blazer 2 Wheel Dr. I put a 355 stroker in it
I bet that thing would move pretty good!
👍👍
Made it to the end of the video about you selling it and by that point looks like you did find a window crank so I don't got to worry about trying to dig out the one that I've got here or trying to remember where it's at LOL . Quite likely it's in the back room on one of a couple shelves because last going off it was in that wooden three drawer unit and if I remember correctly I took everything out of it and put it on one of the shelves. At any rate you found a window crank for it
Great looking truck you should call it white fang
I have an 89 I’ve been stealing ideas for. Good wirk
Thanks brotha
Proper build video 👍🏽👍🏽🤘🏽🤘🏽
Thanks man I really appreciate it 🤙🏻
Bonez is a perfect nickname.
Cool ride. She just need some tires with good meat on them. And some rust prevention work underneath. And some rust prevention in general.
Yea by the end of it she’s a pretty good truck and rust prevention aswell
Sick bro
You would be missing the window Winder,. It's been 6 years I don't know where to look for it anymore or I'd give you one. I had one off my 72 where I had an extra long story. I'm kind of drawing a blank I don't know where it is now. Last time I seen it was roughly 6 years ago so I know it's here in the house but I can't remember where slap in the face is it'll probably come to me and I won't remember where this video is on TH-cam. I don't think it's something simple like sitting on the shelf in the other room cuz I know it used to be in that wooden three drawer unit that came apart and I don't remember where I put the stuff that was in that wooden unit.i used to have a little wooden thing look like a small filing cabinet was from a radio station down here and I had a bunch of stuff in it like badges off of a old Corvette that kind of thing but I can't remember where I took the stuff that was in it when it got stuck shot and I had to Pride open to get something out took everything out of it can't remember where I put the stuff now.
Great video, keep this content coming. Subscribed.
Thank you very much!
Center bolt valve covers do not necessarily mean "vortec" all 1987 and on SBCs had them. More than likely just regular TBI heads. Vortec are after 1995. These heads also fit all SBC blocks. So it could be an early block pre 87 with late heads.
Nice! Thank you for the information I appreciate it!
Literally laughed out loud at the muffler
🤣🤣🤣
I've never seen so many dogs that interested! Eddie
Haha right! And there was 2 in my truck 😆
Hey buddy if you are planning on running 38” tires I definitely wouldn’t even mess with spending money on those half ton axles for sure!! I’d go straight to 1 ton axles to save you bunches of money in the long run!!! I run a 1969 Chevy 1Ton 4x4 with 13” of lift and 39” boggers and of course like I said it’s a 1Ton!! I also have a 1981 Chevy 1Ton 4x4!! Did you end up changing the calipers??? If they end up sitting for a long time they can stick causing the brakes to heat up and lock up!! Awesome video buddy and remember keep up all the hard work buddy!!!
Yeah that’s exactly why I went with 35s instead of 38s lol luckily, this one has a Dana 44 in the front, but still could use one tons for sure! And yes, I ended up changing the after they locked up haha
That a vortec 350 the upside roller rockers typically 4 bolt main caps
I've got a couple names. VULGAR DISPLAY OF POWER. RAM JAM BLACK BETTY. But otherwise good luck with your new channel I'm going to give you two thumbs up I'm able to do that I have two different networks peace out
Thanks brotha I appreciate the love 🤙🏻
@@twowheeltoys I do love a Harley to and an Indian we oughta learn how to marinate together peace out brother from another mother
I know good name for the truck Taz
My friend laughs like that when he smokes the chronic
Lol well I always do sooooo 🤷🏼♂️😆
Me to lol
I think Sargent would be a good name
Kinda does have a cop car feel going lol
Call him Jimmy Dean
The Gem
Idk if I’d call her a gem exactly haha
I would keep the jimmy fr just got to learn how to drive and work on them J's lol
Shoot I already traded her for some more Harley’s lol
Oh the other thing I would do is definitely run a turbo 400 or the manual sm465!! I have tried turbo 350 and they definitely won’t hold up!!! What do you want out of the blazer??? I’ve actually been looking for one!! I’d really like to have a 1969-1972 but I definitely love the square body trucks also!! Let me no if you still have it and what you want out of it???
I actually already traded it for some more Harley’s lol which will be in my next video
I definitely want the how to on the transfer case upgrade. I have a 76 with the 203 and want to do the same thing. Also mine seems to pop out of gear? I think it's the shitty linkages though
Oh. Nvm. Guess I should watch the whole video before commenting
Yeah, whatever you do keep that thing in the truck and be very careful when taking it apart those needle bearings will definitely fall out.
This actually looks better than the 72 that I had I had the 72 version with the full convertible roof fiberglass. This is the newer model with the half roof. God I miss that unit two wheel drive version. Video you've got here should have been playing the theme from The Terminator. They had one of these rigs in an early scene of the Terminator with a machine gun mounted in the back I've only ever seen one four wheel drive model and every time I drive by the guys house I feel sick it was practically rust free when he got it guy drove it for a month or two and stop driving it because of the price of gas and it's sitting wasting away now in his driveway for about 15 years he got it not long after I had to give up on the 72. A couple people have tried to buy it and the guy for whatever reason just wouldn't sell it can't remember if it's got a 350 or 454 in the one that he's got
Haha they are definitely a blast! Sounds like you’ve had your experience with them!
@@twowheeltoys I was a lot stupider when I was younger lol. Bear in mind I was 20ish. I started with a unit that had been a one owner and been practically stripped to the Bone. Somebody ended up buying it because it had a crate motor in it the last going off. First owner put a crate motor in it drove it for three or four years with the crate motor and then it's set for I don't know how many years. This guy at some point had put body panels on the sides replacement panels at least once the floor pans had been replaced and so on. He had put aftermarket drivetrain on most of it had a 12-volt rear end posi and none of the front drivetrain was Factory which made getting a lot of parts for it interesting. It had oversized brakes on the front that were way bigger than Factory as well as most of the other front drivetrain lol. When I got it the guy that had bought it for parts had taken off the tailgate the windshield engine bonnet motor transmission drive shaft front and rear bumper and it had a bad steering column and the unit the steering column attached to that goes to the front end was bad, gauge cluster was broken there was no window winders on the Windows no door panels no exhaust system entire brake system was gone lol.
I ended up buying a truck that had a motor in it out of a GTO lol. Truck had been in Farmers field for God knows how long and he put the motor in the truck out of the GTO when he rolled the GTO. Used the windshield off of that truck front bumper the engine that he put in it from the GTO and I think a few other pieces on the Jimmy. Door panels gas tank rear bumper gauge cluster I used out of a 86 if I remember correctly. Driver side seat I put in it where it had no seat was out of a camper van. Dash pad I know come out of that 86. I'm struggling to remember where I got a steering column for it. Carburetor was from the 1970s in a sealed box that somebody had laying in a room of Parts where they used to run a garage down here lol. Transmission I used came out of a Knight Rider model Firebird that was pretty much stripped transmission was in the back seat and we use the transmission and the steering wheel off of it on the Jimmy lol. Guy ended up buying that transmission from me when I put it out the Jimmy where he wanted the transmission for a 80 something that he was trying to do everything Factory original to that particular year.
We had to have a custom driveshaft made to use that transmission. Exhaust system was a bunch of scraps of pipe and hanger that they had at a Speedy Muffler lol and two of the cheapest Mufflers they had. We replaced the entire brake system from the master cylinder back lines pads calipers rotors brake drums everything all brand new. Front wheel bearings too. Can't remember if we did the back wheel bearings or not all new universals for the drive shaft. Took the engine that was out of that GTO that had been half-assed into the old truck and my father put a gasket kit in the motor new set of plugs and plug wires. Brake lights we used on the Jimmy were off of that truck that was in the farmers field as well. Engine Bonnet was off of another truck from another Farmer's field. Tailgate I got was a brand new aftermarket tailgate where a guy had bought the tailgate and rolled his rig about a week after buying the tailgate. So the whole time I own the vehicle it had no back window just a piece of wood in the tailgate with a couple of long nails through it to hold the wood up when you were driving lol. No back seat in it just the two bucket seats in the front. Lap belts I forget what vehicle we got the lap belts out of where it had no seat belts when I started lol. Ridiculous I'm out of the parts came off of that 87 that was wrecked was some special edition version that had some stupid interior package Wrangler or something like that. Honestly in hindsight I should have just patched it up I could have got another two or three years out of it. I drove it for several years and I started having a problem bizarrely with the carburetor it needed a couple front end parts and a piece welded in the floor I probably could have got another year to out of it but didn't want to spend another at that point would have been like 400 plus probably replacing the carburetor. Something started going wonky in the carburetor after like 4 years float was sticking or something and it started Dragon firing out of the carburetor. It would backfire up through the carburetor which started several fires lol and I stopped at that point driving it. Speed Shop that I got a lot of parts from did stalkers and they got the GTO motor that they ended up using in a track car that they built. Guy that was doing a Firebird got the transmission. I used the entire drivetrain and exhaust system door panels window winders windshield front bumper brake lights I think even the steering column glove box dash pad and gauge cluster on a 86 short wheelbase that I bought or I should say my grandfather bought to be more specific after I told him not to get it. Had trouble with that truck the entire time I owned it kept breaking down constantly ironically I never really had much trouble with the Jimmy breaking down. Stuff I had with the Jimmy had been like a battery went bad couple of bad ground wires at different times one of the wires broke for the brake lights and I had to replace the entire two wires going from up in the front all the way back to the brake lights that kind of thing but was always silly stupid stuff. Like I replaced the alternator at one point. But that 86 short wheel base I don't know why it just kept breaking down constantly last going off it blew a hole in the engine despite having a rebuilt 350 in it with a crap load of new parts on it lol. Ironic how long that goddamn exhaust system lasted and was still in good shape when I sold the other truck use nearly the entire exhaust system off the Jimmy on that short wheelbase used all the brake parts and so on that didn't end up getting reused was the master cylinder. Somebody bought the tailgate as an example and somebody got the front or rear bumper whichever one I didn't end up using was almost nothing left of it when it went for scrap I think somebody even got the engine on it lol. The two-wheel drive ones are super rare around these parts even the four-wheel drive ones were pretty uncommon. Guy that I bought it from never did like me very much because the crate motor that he took out of it didn't last him 2 years and that motor that I pulled out of a vehicle in a field lasted me quite a few years and ended up being like I said properly rebuilt and used in a track car lol. I think I spent about $2,500 including what I paid for it. Doing that same level of insanity now would probably run you five grand and you wouldn't be able to get most of the parts the way I did. You can't just go around getting stuff out of the farmers Fields anymore because the farmers got rid of everything when scrap metal got high in the mid2000s at one point they were getting like 400 bucks per vehicle so everything got cleaned out of the fields around here. Probably would have been a miserable time trying to get parts that old from most salvage yards lol. When the scrap metal was high even the salvage yards pretty much got rid of everything so there's not a lot of yards around here with anything more than from like the 1990s nowadays pretty much anything before like 94 is gone
72 I the best k5 ever
@@rexperkins615 Some point I got a breakdown and find out what year to what year they made that roof design one that I had from the top of the windshield back was removable and it only had lap belts because there was no pillar for a shoulder belt. From what I understand it was 73 that they went to the roof design that you see on this vehicle in this video and I'm pretty sure 71 didn't have a removable roof at all
Turn the key off on the highway and then turn it back on you can blow both mufflers up
Haha well this is good info to know!
The Jim digger
It’s definitely a digger that’s for sure 😆
Hell Ya Taz Love you Man yall sleepin on this guy , Awwsum Guy Awwsum Work !!! Ill be watching all your Vids , Maybe even get youre help getting rid of this 2016 Yz450fx :( moms comes 1st but God is Good !!!
Appreciate the love for real brother! If you need anything let me know I’ve got your back 🤙🏻
It is missing like hell it that old gas
Try letting it run for a minute it will smooth out
Some times those kick down cables can be a motha putting in. I see in comments you sold it already 😢
My old 72 Ford ranger 100 is brown li call it the old turd top of cab is baby turd yellow also
Maybe look int painting it? Haha jk
I want both types of videos I want how to and what you do
Just Do it there are plenty of "how to" channels , Just entertain us!
That’s kinda what I was thinking aswell! Appreciate the input
Name it Trooper. 1.) Because it is already Storm Trooper colored. 2.) Trooper goes along with Chief
Damn now that might be the perfect name!
You should name it bad to the bone
Betty white
Haha hey that’s a good one!
Name the Jimmy Casper, the ghost
Haha HEY YOU GOT IT! That’s actually what I named it!
What size wheels are those and what brand? They look like pro comps can't tell the size
Yessir they are and they are 15s
How to
Why not spiffy
Name it BIG LOU
Spiffy 😂
The spiffiest!!
Jjeahhh monn
you sold it already 😂
Sure did lol wanted to build my Harley’s I explain that at the end of the video
The general
What leaf’s did you get ?
I got the 6in rough country lift kit
Name is given me Olaf vibes
Haha hey that’s a damn good one too!
HOW much and where?
Already sold I actually traded it for some more Harley’s lol
Jezebel
Name it commander
Shoot If I didn’t already sell it haha sold it to buy another Harley stunt bike which the video for that is in the works aswell!
Me and my little sister share this account so I am not really on this account but I think it should be called Jack or Biff
Right on!
If building mud truck get rid of 203 case go to 205
Don't want chain drive and 400 turbo trans
Yea I know a lot of guys do a 203 - 205 doubler
commando
How much is the jimmy selling for?
Actually already sold it
Denton ?
Yes Denton tx
It’s hard to think of a name, not knowing what your plan is with it
You’re gonna have to let it sit there in idle for a minute
Casper
That’s actually what I ended up naming it!
name you mud jam
I got the name. Call it LITTLE MULE,
Iv blown up a muffler lol
First time for me haha
GMC Jimmy then you have name it James Dean .
Haha heeeeyyy I like that one!
Haha yeaaaa you got me there I’m definitely a smoker 🤣
What is that laugh he has it sounds like he it a little kid getting tickled
Lol I’ve laughed like that my whole life
Name, ( Comanche)
So what I’m saying is if it’s something that can help me in the future I want how to if it’s something just make the videos man
Taz? Ты не из россии?
No sir I’m from Texas in America!
I was gonna subscribe but all you really have are shorts 😕
I’m working on it, I just started actually posting about two weeks ago. I have multiple videos in the works. Just a lot of work making them and running two businesses at the same time.
Goofy is as goofy does!!!!
Do you have a tiktok account
That’s the only form of social media I actually don’t have