Installed the 2 inch Highlifter Lift Kit on my Kawasaki Mule. Basic overview. Buy a spring compressor to do the job! Most difficult part is the springs by far.
Thanks for the tips on spring compression, I'll be installing a lift kit on a 2013 mule 4010 when spring arrives. I know mules are bulletproof mine has over 2700 hours and still going strong.
I left them connected and just worked around them. I believe I zip tied them out of the way. It wasn’t a problem for me because I don’t remember it being an issue. The major problem was compressing those springs!
Looks good, but I've read many forums that the 4010 Mule drive shaft eventually gets heavily warn and screwed up with this 2 inch lift because it's a completely different angle... have you noticed any signs of this yet...
Cost! 😂 but I had a Teryx 4 seater that I loved but it was loud and hot. I like the 3yr warranty with the Mule and the fact that the bed can be made bigger and it is essentially a 6 seater if needed and it isn’t as long as the other 4 seaters. Since we only really use it for deer hunting and chores I didn’t need it to do 50 or be extremely off-road capable. Also, when I looked at used ones it was nothing to see some with over 1000hrs so I know they are basically bulletproof. But I will also go back to cost! 😂
Thanks for the tips on spring compression, I'll be installing a lift kit on a 2013 mule 4010 when spring arrives. I know mules are bulletproof mine has over 2700 hours and still going strong.
Not a problem at all!
Quick question. How did you get the spindle bolt out with the brake line in the way.
I left them connected and just worked around them. I believe I zip tied them out of the way. It wasn’t a problem for me because I don’t remember it being an issue. The major problem was compressing those springs!
Looks good, but I've read many forums that the 4010 Mule drive shaft eventually gets heavily warn and screwed up with this 2 inch lift because it's a completely different angle... have you noticed any signs of this yet...
No I haven’t. It has about 89hrs on it now.
Very nice!👍🏻
Doing the same to mine thank u sir
You will enjoy it. Those Sedona tires are wearing like iron. The machine has about 100hrs on it. Does well!
Does the lift kit void the three year warranty? Just want some clarification if you know, thanks.
I was told that it didn’t. But you might ask your dealer. I am definitely not the end all be all on that. So please don’t let me lie to you. 😊
Haha, gotcha, gotcha. Thanks man, it looks awesome!
@@korycoleman One more thing, can you post a link to the winch that’s mounted please? Thanks!
www.denniskirk.com/kfi-products/3500-lb-stealth-winch-se35.p5101472.prd/5101472.sku
Looks great !
I’ve got a 2018.
Did the ride change at all ?
What size wheels and tires did you run.?
It’s probably a little more stiff but I didn’t have much experience driving it before the lift since It was new. 26x10x12 Sedona Rip Saw tires.
WHAT MADE YOU CHOSE A MULE OVER A CAN-AM OR POLARIS ? LOOKS GOOD
Cost! 😂 but I had a Teryx 4 seater that I loved but it was loud and hot. I like the 3yr warranty with the Mule and the fact that the bed can be made bigger and it is essentially a 6 seater if needed and it isn’t as long as the other 4 seaters. Since we only really use it for deer hunting and chores I didn’t need it to do 50 or be extremely off-road capable. Also, when I looked at used ones it was nothing to see some with over 1000hrs so I know they are basically bulletproof. But I will also go back to cost! 😂
Are you running the same size tires on front and rear? What wheels are you running? Thanks!
26x10x12 Sedona Rips Saws on all 4. 4/137 ITP Delta steel wheels 12x7
Did you have to change your stock rims to upgrade the tires?
I did. Because I went with the wider tires
Hello, Are you interested in testing products? We would like to invite you to test the camo seat cover for your Mule 4010
wich lift kit did you buy
???
2” from Highlifter.com
How tall is it after your mods? Does it fit in your garage height wise?
It is down at our hunting cabin now but it was 4” higher than what stock was. I don’t remember what that number is though.
Good deal that give me a good enough idea.
Do you know the offset of the wheels you installed?
ITP Steel Wheels. 12x7 4.0 + 3.0 on Rocky Mountain ATV
Thank you!
I just ordered a 2023 Camo and I like you what you've done to your Mule. Looks good
Does it fit in the garage with the roof, wheels and lift installed?
@@jasonhutchins3679 yes it does.
Thank you 👍🏼
Hello, Are you interested in testing products? We would like to invite you to test the seat cover for Mule 4010
OEM ones?
@@korycoleman Yes.
@@StarknightMT_official sure. I would do that.
@@korycoleman thanks for your reply, Could you please provide your email address or Facebook for us to send the details?
@@StarknightMT_official kory_coleman@hotmail.com