2022 Road Glide ST Upgrade - Rinehart 4.0 Slip-On Exhaust Install
ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2022
- Finally ready to slap on the new Rinehart 4.0 slip-ons! Awesome!
Rinehart Black 4.0 in. Slip-On Mufflers with Black End Caps: www.denniskirk.com/rinehart/b...
@rinehartracing4419
No tuning required or recommended when installing on stock head pipes(catalyst)and with stock intake. See how it goes, what they sound like, and check out the road test!
Check it out and share your comments, feedback and questions.
All are welcome!
Just Kill’n Bugz Merch: www.bonfire.com/store/just-ki...
Just Kill’n Bugz Stickers and Such: www.redbubble.com/people/kill...
Share this video with friends: • 2022 Road Glide ST Upg...
Subscribe to my Channel (or share with friends) to get info and notifications on Current/Future Installs, Travel, and Reviews
* Just Kill'n Bugz: / @justkillnbugz
Items I Use Regularly:
APlusLift MT1500X 48” 1500LB Air - amzn.to/42q5o3Q
Strapinno Retractable Ratchet Straps 1 in x 6 ft - amzn.to/3JXMPNl
Gearwrench Adjustable Mobile Work Table 35-48” - amzn.to/40qUvNx
Video Audio: DJI Wireless Mic System - amzn.to/40fR3pq
Mobile Camera: GoPro Hero 11 Black - amzn.to/42thcCF
Helmet Camera: GoPro Hero 9 Black - amzn.to/3FFjhBl
Overhead Camera: GoPro Hero 8 Black - amzn.to/3LFWNEp
Rotating Camera Shots: Insta360 ONE X2 Action Camera - amzn.to/3lAue0o
Primary Video Camera: Sony ZV-E10 Mirrorless Camera - amzn.to/3JGb5C2
B-Roll Video Camera: Sony ZV-1 Content Creators Camera - amzn.to/3FJlV9i
Neewer 72 inch Tripod Kit - amzn.to/40ag6d9
NEEWER 2 Pack Bi Color 660 LED Video Light and Stand Kit - amzn.to/3JEopqB
60-Piece Master Torx Bit Set - amzn.to/3Z9Jv69
Lexicon Master Hex Bit Set - amzn.to/3nc3XWO
Tekton 3-Piece Swivel Head Racket Set - amzn.to/3JCIUnQ
Tekton 3/8 and 1/4 Inch Torque Wrench Set - amzn.to/3JG9V9E
US Veteran Hat with Embroidered DD-214 Alumni and National Service Ribbon: amzn.to/3zhpbFa
Want to Connect?
* Follow me on Instagram: / justkillnbugz
* Have something you want to send me?
* Robert
30141 Antelope Rd D676
Menifee CA 92584
* Just to put this disclaimer out there, I am not a certified Harley Davidson or Motorcycle Mechanic. I’m just a person who got tired of paying overpriced "what the book says" labor charges for simple things I could do on my own vehicles or projects. Just like most of you searching and watching these videos, I thoroughly enjoy working on projects in my own garage or shop.
* Additional note, all products/parts covered in these videos are not paid or sponsor provided, or unless otherwise indicated up front. I purchase all my own products/parts out of my own pocket just as my viewers would. The thoughts, opinions and comments are all my own based on this experience. Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional cost to you!
** Most of all, THANK YOU for your Support! **
Strap wrench works wonders
You are doing some of the coolest mods. One sweet bike. An great videos
Hey Jerry, thanks for the comments and the support! I am glad you are enjoying them. I appreciate the feedback and the compliments! Stay tuned, more in the pipeline 🙂
Nice video
Untanned white hands... A very clear sign of unprotected t-shirt rider 😎. By the way, thanks for the video and kudos for both the ST and the well organized dream garage of yours. Keep wrenching and sharing my friend.
Hi Mustafa, thank you for the comments and feedback. Yes, I wear a reinforced vest most of the time, our days have been over 100 for the past month or so and its been hard to stay cool 🙂. Thanks for the garage kudos, its a mess for sure, but it gets it done for me!
Stay tuned, more videos in route.
@@justkillnbugz the garage is great, I love it.
Best slip ons on the market.
Thanks for the comments! I must agree, for that application they sounded great!
Ride Safe
They really roar on your ride video part...👍😎
Hey Brad, thanks for the comments. They sure do, but it was a little hard to translate on my front cam.
I actually just took some footage that I will be posting soon with a different POV with the cam mounted at the back which really lets you hear the pipes at different stages. They do sound nice, stay tuned...
@@justkillnbugz Thats great...Cant wait to hear that video
Yeah, my right side did not come off easily either. I went S&S Sidewinder 2 into one. Did you know its about a 24 lb weight savings? I have to get the Lift Table. Crawling around on the floor is such a pain. Literally!!! Thanks for the Video, once again. Keep them coming.
Hey Scott, ya, it was a wiggle fest for sure and didn't help that it was over 100 degrees in my garage, I considered it a cleansing, lol. I wanted to do full pipes, but in my location, it's a challenge so we will see what happens after the warranty drops off, but definitely like the weight savings, but do enjoy the balanced look of one on each side. More to come and thanks for the continued support!
Damn. You can absolutely tell the difference. I regret going with the Harley stage 1 slip ons and not these.
Thanks for the comments! Yes, I agree, I have these on my Heritage and love them (for slip-ons anyways) but I am glad it translated over well enough in the video, that's always a challenge...
Ride Safe!
Great video! Can you do a walk around with the bike at idle with the slip-ons? Wouldn't mind hearing your other bikes too!
Hi Benjamin, thank you for the comments and the feedback. I tried to capture the idle on the rack, but the translation left a little to be desired even with the camera at the back.
I will see what I can do with another ST walkaround with idle and reving, maybe a separate GoPro sitting behind them, it is always difficult on camera, and may just line em all up and hope for the best 🙂
Nice
Thank you, much appreciated
Be safe,
Thank you, you as well.
I did mine in a heatwave puddle of sweat never again
hi, thanks for your videos. which gearboxes did you use?
Hey there, thanks for the comment, not sure what you mean by gearboxes, if you could please clarify a bit more, I will try to answer, thanks!
How did the fitment go? I attempted to install 4.5 and the swing arm bolt and nut kept hitting the muffler. Going to exchange it for a 4”
Is yours the regular 4 or dbx40? Why did you go with one and not the other? Thanks
Hey GT, thanks for the comments! The fitment went perfectly! I had no issues with the 4.0 mufflers, just be sure you have them turned right, I covered them with a towel to minimize scratches and on far enough (refer to the video). I chose the standard vs the dbx40 because they were out of stock at the time, otherwise I would have gotten those as well.
Hope that helps, ride safe!
You installed the hanger bolts wrong. Instructions say, "3. Slide head of 5/16”-18 x 5/8” hex bolts (supplied) into slots on top of muffler bodies with threads pointing
upwards.''
Thanks for the comment. I used my personal preference of having the bolt head up and not the threaded nut, but appreciate the instructions review 👍
Ride Safe
💯💯👍👍
Does the rinehart exhaust come with the gasket or are thr gaskets sold separately?
Hi Edguardo, thanks for the question. As indicated in the video, I bought the gaskets from the dealer, Rinehart does not include them with the pipes. However, after I took the stock mufflers off, there were no gaskets and the new ones would not fit, so, none needed for the install.
Thanks again, ride sfae!
Strange…in Holland we have a big gasket inside the slip-ons? That cost you €50 more because the aren’t exchangeable
Thanks for the comments, I agree. I was surprised there was no gasket either. I had them on my Rocket and on my Heritage.
Ride safe
Hey thanks for posting I know what we can do let's make a video about how to make my Harley loud
Hey Jim, thanks for the comments! I totally agree, I would love to go a bit more aggressive, but, in my state, I can't, yet.... :-)
Soon though, soon ;-)
What size? 4 or 4.5? I got the 4.5 on mine right now, a lot of decel pop happening
Hey Cody, thanks for the question. As described in the thumbnail, description and intro to the video, these are 4.0 slip-ons. I heard many of the same comments about the 4.5s that you mention, so that is why I got the 4s. I do not experience any deceleration popping or any issues really at all with these. May be worth a look.
Ride safe and thanks again.
what bars are those ?
Thanks for the question, factory 47 14” bars.
ST should have a 2-1
Hey Michael, thanks for the feedback!
I 100% agree, especially since it has the standard bags with no pipe cut outs. But due to where I live, it aint that simple, plus I am waiting for the warranty period to end. Then it's gonna be a reality ;-)