Detailed Steering Rack Rebuild, Part 1(with part numbers) The Nissan Z32 300zx Twin Turbo Mega Build

Part 1 of my Comprehensive Steering Rack Rebuild Tutorial. Project Fairlady, The Nissan Z32 300zx Twin Turbo Mega Build.
If you find my Content Helpful & would like to Buy Me A Beer, please do so, at the Link below.
Beer Money for The Aussie Shed,. Paypal: tinyurl.com/y64rc98f
My Website that Carries some of the Parts I make. www.upperhandperformanceprodu...
Follow Me on
Facebook / theaussieshedd
Facebook profile.php?...
#theaussieshed #z32 #fairladyz #projectfairlady #300zx

[@markboyer287]

Excellent job!

[@8Bitplus]

P.s. your not an idiot, your an absolute genius and amazing contributor to the z32 community.

[@BenMitro]

...and the non z32 community.

[@drdiabeetus3061]

Absolute legend! A video on this has been needed for many years! Thank You! My buddy Eric (who did the R35 brake booster/MC mod) needs to get this done!

[@TheAussieShed]

Awesome, Cheers Mate.

[@bspradley]

As always, another thorough video and great explanation of how to complete these steps. Oh, and great advice on how to take care of your shaft. It is a very sensitive piece of equipment. Ha!

[@TheAussieShed]

Glad you enjoyed it! Cheers Mate.

[@codasinmurry]

Amazing rod & rack manipulation Gary 👍

[@TheAussieShed]

Thanks Gary

[@silver33vspec]

Probably needs a beeeeeeahh, a Fosters perhaps, Austraalllian for beeeeeah.
Love the videos! Even helped my with my 33!

[@TheAussieShed]

Cheers Mate.

[@BenMitro]

I would never have thunk it, but the gut is the most sensitive organ we have.

[@TheAussieShed]

Onya Ben, Cheers Mate.

[@GodzillaResto]

You can get the rings from Amayama :) Nissan part number is 49263-10V00, its the same as an R32 GTR. Amazing content btw

[@TheAussieShed]

Thankyou Sir, dammit, I have been chasing a different part number & have ordered a couple. Ah well, may even end up being the same seal, from Nissan but a different number. Cheers Mate.

[@CraigLYoung]

Thanks for sharing 👍

[@TheAussieShed]

Cheers Craig.

[@deeferdownunder]

Top job Trev. Going with know how and gut feeling has saved you and maybe a lot of other people some major grief. Then again you might be up shit creek if it was a Chinese manual

[@TheAussieShed]

Cheers Mate, I know that particular creek very well. Lol.

[@8Bitplus]

You made this exactly 4 weeks 2 short. Just put my rebuilt rack back into the car. I used a seal kit from a aftermarket supplier. Ill let you know how it goes.

[@TheAussieShed]

Dam, i've always had shit timing. Cheers Mate.

[@billsimpson2392]

👍👍

[@TheAussieShed]

Cheers Bill.

[@peterwooldridge7285]

Interesting...
What's the purpose of the very fine shim type washer ie the one no longer in production? Why not a single part machined to the correct dimension?

[@drdiabeetus3061]

I suspect it’s for adjusting the gear lash or contact patch. So not every rack will be exactly the same.

[@8Bitplus]

Also mine had no shim idk exactly why but i can verify no shim was in my rack.