Excellent Sir 🫡 And with that huuuuuuge spur gear too.. I've not long bought the 104001 and it's in my shed ready for its upgrade. I bought it just to upgrade it. Hasn't been out the box yet lol but I've got a 35 tooth spur gear with a 6mm hole ready to stick it onto the bar where the original spur is, and I've got a 20 & 25 tooth pinion aswel , Mod 1 of course.. 3800kv 4274 brushless motor, hobbywing bl 150 esc and a powerful servo too. And of course the famous DumboRC radio & receiver.. I can not wait to get it put together bro.. I've also made a new TH-cam channel and I'll be putting videos up like yourself in the very near future. (End of June 2024) Just wanna add that , it's because of people like you and channels like yours, that I've really really gotten into RC cars and modifying them. So thank you for your videos bro. Please keep them coming because the world needs people like you.. God Bless 🙏
Didn´t have a thermometer, but for just a couple of speed run passes the motor does not get too hot. If you are concerned about motor temp, better use low kv motors.
The Car is so nice, have also one :D it drives over 100km/h but you have only change the 30T Pinion ? It is compatible ? And would you say me how i can make the Car deeper ? Greets
What 3 s batt what mah you show the 4 wires but the batt is all covered and the 2s batt is not the one that comes with the car I got mine from bangbad lol also love your channel but be honest your still the man supper fast help us knew guys bud
I have mentioned in the video that the 3s lipo used is "ZEE 2200 mAh", please check the link in the Description box. ,, I have covered it with black Shrink Tube for protection purposes only since I have already damaged some of my lipo batteries when the rc car crashed without protecting the lipo battery... FYI, the lipo battery brand is Not the main key for me to going fast that is why you will see in my other videos that I always used very cheap lipo batteries compared to other speedrunners.,, but I also get good results... The 2s battery I used here is the one that came with this rc car, but it doesnt matter much ... what matters more to go fast is how you perosnally setup the rc car and how you drive it.
@@RcModwerks23 I completely agree set up is key don’t get me wrong I was not saying anything bad about you I’ve been watching and learning from you and just a few others I’m pretty selective and your results are amazing I have some of the same cars you do and I’m just a bit behind you but I just started speed runs about 6 months ago much respect bud it’s very hard to do this as you know your channel is one of just a couple that got me into this and keeps me motivated thank you for what you do just started a TH-cam channel H and W rc racing channel god speed sir
Excellent Sir 🫡
And with that huuuuuuge spur gear too.. I've not long bought the 104001 and it's in my shed ready for its upgrade. I bought it just to upgrade it. Hasn't been out the box yet lol but I've got a 35 tooth spur gear with a 6mm hole ready to stick it onto the bar where the original spur is, and I've got a 20 & 25 tooth pinion aswel , Mod 1 of course.. 3800kv 4274 brushless motor, hobbywing bl 150 esc and a powerful servo too. And of course the famous DumboRC radio & receiver.. I can not wait to get it put together bro.. I've also made a new TH-cam channel and I'll be putting videos up like yourself in the very near future. (End of June 2024)
Just wanna add that , it's because of people like you and channels like yours, that I've really really gotten into RC cars and modifying them. So thank you for your videos bro. Please keep them coming because the world needs people like you..
God Bless 🙏
Thanks for the nice words, hope to get back to the hobby sooner or later 👍
How did you fit a 4274 motor in a 1/10 scale?
Love the speeds getting better every time 👊🏻👍🏻
Thanks for your usual support 👍
Awesome again bro 👏 can't wait for the next 1
Thanks bro! 👍
Nice runs, where did you buy the pinions from, can you share the link?
I bought it earlier from Banggood, link on the Description box
@@RcModwerks23 seems to be discontinued bro
@@PERTHWESTOZRC I bought it last year, but you can get from other shops
check Aliexpress they have it : bit.ly/378nfAU
How Hot is the motor
Didn´t have a thermometer, but for just a couple of speed run passes the motor does not get too hot. If you are concerned about motor temp, better use low kv motors.
@@RcModwerks23 yea i know. I like to use lower kv but higher s lipo, it runs smoother i think
@@fran.6496 yes it is, hope it works well for you
Have that same esc an castle motor thank you
Thanks for watching!
Awesome 👏 keep it up👍
Thanks a lot 😊
is this with gyro on? Awesome video!!
The gyro is OFF . Thanks!
Excellent runs. Now with a mod1 spur 40t you will be over 100mph.
Thanks! Yes, 100+ mph is possible with Mod1 gears
The Car is so nice, have also one :D it drives over 100km/h but you have only change the 30T Pinion ? It is compatible ? And would you say me how i can make the Car deeper ? Greets
Yes, only the pinion was changed in this speedrun. The spur gear was still the stock one.
this shit is nice bro bro build 6s on this car . :) NICE JOBB
Thanks for watching, maybe 4s later on
Amazing so fast
Thanks !👍
That's incredible. How did U fit a 3s in there
Thanks! The 2200 mAh 3s Lipo just fits perfectly on the battery tray
Kecepatan yg sangt luar biasa👍
Thanks !
what battery are you using? nothing fits in this car .
ZEE Brand , 2200 mAh 3s lipo ...Thanks for watching ! 👍
wow
Thanks for wathcing
That's great but a suggestion to make Ur channel better have links to the parts you put in, in the description.
It´s already provided on the description box
Great run mama that’s impressive! Would you Happen to be able to help a brother out and send me the link to the tires? Thanks brother. ☺🙏🏼
The foam tires were bought in my local rc shop, sorry there is no link. Thanks for watching 👍
What 3 s batt what mah you show the 4 wires but the batt is all covered and the 2s batt is not the one that comes with the car I got mine from bangbad lol also love your channel but be honest your still the man supper fast help us knew guys bud
I have mentioned in the video that the 3s lipo used is "ZEE 2200 mAh", please check the link in the Description box. ,, I have covered it with black Shrink Tube for protection purposes only since I have already damaged some of my lipo batteries when the rc car crashed without protecting the lipo battery... FYI, the lipo battery brand is Not the main key for me to going fast that is why you will see in my other videos that I always used very cheap lipo batteries compared to other speedrunners.,, but I also get good results... The 2s battery I used here is the one that came with this rc car, but it doesnt matter much ... what matters more to go fast is how you perosnally setup the rc car and how you drive it.
@@RcModwerks23 I completely agree set up is key don’t get me wrong I was not saying anything bad about you I’ve been watching and learning from you and just a few others I’m pretty selective and your results are amazing I have some of the same cars you do and I’m just a bit behind you but I just started speed runs about 6 months ago much respect bud it’s very hard to do this as you know your channel is one of just a couple that got me into this and keeps me motivated thank you for what you do just started a TH-cam channel H and W rc racing channel god speed sir
Now use the 4274 motor lol
And 150a esc for 6s runs
Not yet at this stage, maybe after modifying the spur gear
You need to stand back a bit
The car is very stable, so no worries 😀
@@RcModwerks23 I didn't mean for safety, I meant for better camera viewing n see how fast it really looks 👍
@@POLITICALYCORRECTify ok, thanks for the input