New CNC innovations intake runners DYNO!

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ส.ค. 2024
  • dyno run with the new cnc runners

ความคิดเห็น • 21

  • @carloszflores4813
    @carloszflores4813 11 หลายเดือนก่อน +1

    Can’t wait to get my 2018 corolla se turbo kit delivered

    • @Night_Watch33
      @Night_Watch33 10 หลายเดือนก่อน

      How do you think the transmission will take it

    • @carloszflores4813
      @carloszflores4813 3 หลายเดือนก่อน

      @@Night_Watch33CVT automatic trans has been running well and normal. I have it at 9 psi of boost just to be safe on my internals. Doesn’t slip and my AC works lol

  • @dougm0
    @dougm0 6 หลายเดือนก่อน

    I’m about to install one on my built 2zz in an elise. Keen to see how it goes

  • @vrtdubber
    @vrtdubber 4 หลายเดือนก่อน +3

    Careful of CNC innovations. Some of their stuff is not done properly and they don't understand how the vacuum system in some cars valve covers work. Their customer service does not care if things fit or not they will ghost you.

    • @jaxnaturals
      @jaxnaturals 13 วันที่ผ่านมา

      Can you explain better? We are looking at one of their products. What do you mean by not fitting properly? Like won't fit and its junk or you have to ream out some holes?

    • @vrtdubber
      @vrtdubber 13 วันที่ผ่านมา +1

      @@jaxnaturals I had to ream out some holes and the fitting that goes to the tube going from the intake to the turbo is too small so I have to wrap it with silicone tape to make it big enough. Also had to seal the plate inside that seals the passages as there is no gasket or anything and they told me those passages don't need to be sealed. But that's how the stock ones fail in the first place and you'll have a huge boost leak. Good looking product but attention to detail isn't there. They threw all the hardware and fittings and oil caps into the same bag so the oil caps are totally scratched up. And am now ghosted. I've seen posts on audizine since then having all the same problems.

    • @jaxnaturals
      @jaxnaturals 13 วันที่ผ่านมา

      @@vrtdubber Hmmm. It may be worth a chance in our situation as it is about $2k cheaper than the next option. If I have to mod/fab/weld/cut we have all of the tools here at our shop. Not optimal for sure though

    • @vrtdubber
      @vrtdubber 13 วันที่ผ่านมา +1

      @@jaxnaturals Yeah the product is usable for sure, I would in your situation. I just wish they would accept and admit their mistakes. I am just trying to help them have a good product.

  • @Juiceskii
    @Juiceskii ปีที่แล้ว

    awesome. still more progress to be made but 176whp in a very light compact car aint a joke

    • @2zzgte_Jan
      @2zzgte_Jan  ปีที่แล้ว +2

      She made 185 with the short runners but that doesn't matter anymore to us since we are now turbo

    • @2zzgte_Jan
      @2zzgte_Jan  ปีที่แล้ว +1

      But yeah she moooves

  • @aznboy568
    @aznboy568 4 หลายเดือนก่อน

    Hey i was looking into buying something from this company thats based in Malaysia. How were they ? i cant find any reviews on them

    • @2zzgte_Jan
      @2zzgte_Jan  4 หลายเดือนก่อน

      Personally I like that intake manifold it looks badass but I feel that it hurts the car power wise n/a and turbo

    • @vrtdubber
      @vrtdubber 3 หลายเดือนก่อน

      Terrible company. Customer service and engineering is bad. Avoid them trust me.

  • @ThorOdinson-zc2kq
    @ThorOdinson-zc2kq 8 หลายเดือนก่อน

    So am I understanding that the engine lost hp with the longer runners?

    • @2zzgte_Jan
      @2zzgte_Jan  8 หลายเดือนก่อน

      Same time I didn't gave an exhuast and the proper cold air intake set up like I did with the shorter runners

  • @vauxracer19
    @vauxracer19 7 หลายเดือนก่อน

    So had you had the car remapped since installing the new runners?

    • @2zzgte_Jan
      @2zzgte_Jan  6 หลายเดือนก่อน

      Not yet

  • @user-xd8xo4bt2i
    @user-xd8xo4bt2i 9 หลายเดือนก่อน

    ❤🙌

    • @2zzgte_Jan
      @2zzgte_Jan  6 หลายเดือนก่อน

      🙌🙌🙌