ฝัง
- เผยแพร่เมื่อ 31 ส.ค. 2023
- Easily install Klipper on your Ender 3 Pro using a Raspberry Pi Zero 2 W by following this COMPLETE DIY guide! Installing Klipper may seem like a daunting task, but it's actually pretty simple when you have all the parts ready prior to completing the install. The whole process should take you anywhere from 15 - 30 minutes to do.
Parts used in the video:
RasTech Raspberry Pi Zero W2 Kit
amzn.to/44C28Cu
Micro SD Card
amzn.to/3sBWgM7
USB A to Micro USB Cable
amzn.to/4809ZMO
Printer
amzn.to/3R4LpVl
Download Links:
Raspberry Pi Imager
www.raspberrypi.com/software/
Mainsail
docs-os.mainsail.xyz/
Putty
www.putty.org/
CoreFTP
www.coreftp.com/
Klipper Config File For Ender 3 Pro with BLTouch / CRTouch
gist.github.com/jasonehines/5...
Channel Sponsors:
Arc Terminator
www.arcterminator.com
Auxito
www.auxito.com/?ref=6ucm39501u (Use Code FOULNEWS for 15% off!)
Like us on Facebook:
/ foulnewsnetwork
Follow us on Twitter:
/ foulnews
Follow us on Instagram:
/ foulnews
Check out our website:
www.foulnews.com - แนวปฏิบัติและการใช้ชีวิต
Yes, I would like to see what comes after the Klipper install. I'll be putting Klipper on my mostly stock OG Ender 3 this coming week and want to have as much information about how to finish the config as possible. And thanks for doing this. You have the most understandable video this 80 year old has found yet.
Thanks for the feedback, I'm glad to hear that you've found my video helpful. I plan on having a video come out Thursday or Friday with some tips on what to do after you've got Klipper installed.
Mate, thank you so much!
Easy to understand and straight to the point, kudos to you!
Great video, thanks for showing examples of the issues and not having edited them!
Thanks for the feedback!
Use full video thanks.. plz make full guidelines video to attach adxl345 to pi z2 w..
Wow Thanks a lot. First try and it run like... ;) Good Job
Hello, you make ot seem so smooth. I keep getting an MCU error and I've tried remaking my Kilpper Software 3 times. Third time was as you explained not enabling "extra low level" and still get the mcu error. But when i check on putty to see if i get the usb connection it shows i do. What could I be doing wrong... Oh yeah I also tried unplugging the screen as you recommend and nothing... 😢
Can you please share how you moved control board outside ender printer?
5:42
We want more stuff with klipper and ender3. Thks fella
I do plan on it! I've got a break from work coming up in a few weeks, so I will likely be able to film some more Klipper-related vids.
@@FoulNews Have fun! thank you!
Enjoy!
@@Rafael-xy5ti Thanks!
No me sale ningún archivo cuando voy a transferir el klipper.bin a la sd
Hello, great video. Do you know if klipper can be installed on a orange pi zero 2w?
Hello, thanks! Yes, it sure can, it's what I used for my CR-5 Pro H. However, since there's less support for it and no Raspberry Pi imager utility, the setup is a little more involved, but not terribly difficult. 3D Nero did a great video on how to get it done: th-cam.com/video/Dh6bEB6iYa8/w-d-xo.html
F#cking love the t-shirt
I have a pi zero-w… will this work? Also interested to add a klipper screen to a 3.5 inch touch screen if possible. Thanks 🙏 ❤
It can work on a Pi Zero W, but it's not recommended since many people have had issues with slowness and potential print artifacts due to the slower speeds of the Pi Zero. A Zero 2 W or Pi 3 and above are ideal.
I have a Ender 7 corexy so which file can i use 4 tis machine 🤔
This seems like a good starting point: github.com/johnson-thomas/Creality-Ender7-Klipper-Starter-Pack/blob/main/printer.cfg
WoW thanks 👍
@@frits183 No prob! Good luck with the install.
this for video foul news can you help me i want printer.conf for ender 3 s1 pro .... can give me link plz
Try this config file, but just make sure the board version matches yours: github.com/Klipper3d/klipper/blob/master/config/printer-creality-ender3-s1-2021.cfg
Wich file can i use 4 the ender 7 🤔
Beware:
Have made the switch to Klipper on my CoreXY machine.. However, I can't get the webcams working, not even one of the two.. (I used crowsnest)
I think the pi zero 2W might have a too small bandwidth for that.. Followed some webcam guides on the web for setting up webcams, but to no avail..
(I can see the webcam window, but it's empty. It does however show 15 fps)
Have to switch back to Marlin for now I'm affraid..
i'm going through the same and it's driving me crazy
@@sandmanlolTry a pi 3 or 4. I'm using a pi 4 now and have no issues with webcams.. Also, one webcam I used with Marlin/Octopi was not recognized by klipper, an other one did the trick
@@winandd8649 crowsnest can make things a little awkward, i had issues with my RPi 4 and a usb webcam
@@winandd8649 yea I might have to just to bypass the hassle
You will definitely run into webcam issues with Zero2W. I just swapped my ender 3 octoprint setup from a pi4b to a pizero2w and have had many issues running more than one serial device (ie. the printer and webcam) at the same time. I've tried different usb hubs, but have not been successful.
Is it weird that I'm staring at your eyebrows?
They're there just to distract you from what's in the background.
@@FoulNews LOL 🤣🤣
The easiest way is a mks skipr 😝
If you don't include wiring in the new board and making sure all the steppers are wired correctly, then yes lol
Not sure if this video about ender3 or x1c. So gay.
All you'd have to do is watch the video and you'll be able to tell.
Let’s goooo
I tried flashing it once or twice now but it doesn’t connect to my wifi at all 🥲, what am I supposed to do now?