I've had mine on for about a month now. It works great, and the bike looks soooo much better without the factory hemorrhoid hanging off the back. Thank you!
What a great tutorial! Very little blah blah blah, no um or uh,you use precise terminology and just enough explanation of concept to not be tedious. I just bought a new '24 KLX300 and this will be one of my first upgrades. Thank you!
You are really good! A real professional and a perfectionist. I am very picky but, I would let you work on my bike anytime. Great Video and Great Job!!
@@TSTindustries Well now that I've hacked off the contraption on the back, I would say not only is it ugly but its heavy, too. With such a big weight savings on the bike, I can trade the weight to myself and have a Twinkie and Dorrito weekend with absolutely no affect on my riding! Thanks TST! BTW on my 2024, R to R and G to G on the turn signal was wrong. I had to switch them once I tested it to the other way around from the video. (shrug) Now that I've finished this install, I'm going to do the turn signals you guys sell. Wish me luck!
Good instructions. I basically followed along to get mine all done. Only thing I had trouble with is using a razor to cut the plastic. It was taking forever and my hands hurt, so I pulled out a small metal hack saw and got it off in a few seconds. Filed the edges down after.
Okay, I've encountered a problem with this setup. When the going gets rough, and I use the full travel of my suspension, the rear tire contacts the license plate and bends it. Any suggestions?
Hello thank for video ,.. but can you help me,..I am looking on your websitew now for the Y splitter system wire you show in this video , but i do not see it anywhere .. can you help me to know the name ?. .. or is it out of stock .. ? thank you
I am glad to see you guys trimmed the fender liner like I did. Initially I had installed the bracket without it and realized there was a huge space where water and mud could get in.
Fender eliminator is not necessary. I have a 2023 klx300 and all I did was invert the license plate bracket then cut off the excess plastic hanging below the license plate. Looks clean and costs nothing.
I've had mine on for about a month now. It works great, and the bike looks soooo much better without the factory hemorrhoid hanging off the back. Thank you!
I have been working on and restoring motorcycles for 40 years as a hobby and can tell that you are an exceptional mechanic and do excellent work.
Comments like this mean the world to us. Thank you for the kind words and the support!
Well done. You have a new customer for my 2024 KLX300.
Awesome. Welcome to the club!
-BR
What a great tutorial! Very little blah blah blah, no um or uh,you use precise terminology and just enough explanation of concept to not be tedious. I just bought a new '24 KLX300 and this will be one of my first upgrades. Thank you!
Thanks for the feedback!
I agree. I watched this video, and don’t even own a KLX 300. (But I want one!)
This was an amazingly helpful video. I've never done anything like this and it was so simple and well described. Thank you!
You are really good! A real professional and a perfectionist. I am very picky but, I would let you work on my bike anytime. Great Video and Great Job!!
Thank you for the love and support!
Ok sold! This thing BETTER make my bike at least 10% faster.
😂😂
@@TSTindustries Well now that I've hacked off the contraption on the back, I would say not only is it ugly but its heavy, too. With such a big weight savings on the bike, I can trade the weight to myself and have a Twinkie and Dorrito weekend with absolutely no affect on my riding! Thanks TST!
BTW on my 2024, R to R and G to G on the turn signal was wrong. I had to switch them once I tested it to the other way around from the video. (shrug) Now that I've finished this install, I'm going to do the turn signals you guys sell. Wish me luck!
Good instructions. I basically followed along to get mine all done. Only thing I had trouble with is using a razor to cut the plastic. It was taking forever and my hands hurt, so I pulled out a small metal hack saw and got it off in a few seconds. Filed the edges down after.
Ooh.. more sweet TST products! 🤘😎
Okay, I've encountered a problem with this setup. When the going gets rough, and I use the full travel of my suspension, the rear tire contacts the license plate and bends it. Any suggestions?
Amigo, donde se compra ese kit? Gracias
Hello thank for video ,.. but can you help me,..I am looking on your websitew now for the Y splitter system wire you show in this video , but i do not see it anywhere .. can you help me to know the name ?. .. or is it out of stock .. ? thank you
That product can be found here: tstindustries.com/tst-kawasaki-y-style-signal-harness-splitter.html
-TST
I sure wish I had just been patient instead of butchering a 2023 version on the back of my 24 a week ago... Oh well... It still looks cool.
I am glad to see you guys trimmed the fender liner like I did. Initially I had installed the bracket without it and realized there was a huge space where water and mud could get in.
On this bike, without making a whole new subtray, the modification is necessary for a clean installation.
Hello, I would like to buy it, I am from Argentina, can you do it?
Nice, I am wondering if the light is street legal in Europe. The website does not tell, so I am guessing not?....Btw, that gray looks amazing!
@@xzouix the product ad does state that the kit is not road legal and may not abide by laws or requirements in certain areas.
@@TSTindustries Thank you, I guess I missed it than.
are these on amazon sir?
No, we do not deal with Amazon. You can purchase direct from our web store TSTindustries.Com
im from philippines haha the shipping fee is scary haha@@TSTindustries
where is the installation for the adjustable plate
@@ws3369 here you go: th-cam.com/video/KiGPnN7l8ho/w-d-xo.htmlsi=AiWYXgRrdAqbZ54Q
21 and up are pretty much the same miner difference in looks
The rear fender is different on the 24 and up.
hot razor blade = ez butter cut
The easiest cut.
Yuck
Fender eliminator is not necessary. I have a 2023 klx300 and all I did was invert the license plate bracket then cut off the excess plastic hanging below the license plate. Looks clean and costs nothing.
@@mrcolin2u we appreciate the ingenuity. You should make a video of the process to benefit other KLX300 owners if they want to go that route.
@@TSTindustries Excellent response. Well done, Sir.
The 24 has a different rear fender setup than the 23.