RiKonstruction i checked it and i think i’am gonna fix it on the workbench! Tnx for the info and maybe i must work with the vibration it makes things more interesting XD.
Mui buena compra tengo una desde el año 2016 i funsiona mui bien , le dejo algunos consejos 1 camvie la tuerca que sujeta el tirador de la lija de vanda por una con freno, se suele aflojar 2 apriete vien el tornillo de la lijadora de plato se suele aflojar , 3 engrase los rodamientos ya que vienen faltos de graza y por ultimo, rejistre vien la lijadora de cinta y jamas se podra detener como le ocurre a muchos , reitero una mui buena adquisición que la disfrute por muchos años suerte en su canal i a seguir.
I have the same sander under the Dirty Tools label, I’m really happy with mine and it’s more than up to the jobs I do on it. I too bought the adhesive disks when I first bought mine!
Thanks for this video, i'm planning to buy one but i can't decide between the Einhell TC US 380 which is the newer model of the 400 or the Scheppach BTS800... Both are the same price :) Greets
@@RiccardoPrezioso Thanks for your reply :) The only difference i found is that the Scheppach is 2850 rpm and the Einhell only 1450. I can't find much info about the Tc Us 380 vs 400 vs Bts900 The 400 costs 125euro The 380: 150euro and the Scheppach is normally 200 but now in discount for 130 euro. Choices... UGH ;)
Secondo te una macchina del genere si può sfruttare per usarla adagiandola su unlato, come levigatrice a nastro orizzontale ? ( devo spesso portare a squadro interni di pezzi curvi, e userei i rulli circolari come se fosse u a levigatrice a tamburo, perché posso acquistare questa usata a molto poco)
Ciao. Personalmente l'ho usata sia inclinata su un lato che sottosopra. Se riesci a fissarla a dovere, lasciandola libera di girare, non ci sono problemi. È un uso precario ma con un po' di accorgimenti puoi usarla tranquillamente!
I've deassembled the original suc duct and let it goes free. When I need I take the flexy pipe of my vacuum where I need. Not the best solution but it works
I was wondering to buy or not to buy it, cause i couldnt find out anywhere, if you could adapt the little table by the belt as you did in 3:45. Now im getting it for sure, thank you !
You're welcome! I am really happy to know that my video is helpful in making this decision. I'm ready to answer any questions in the future! Thank for appreciating my work
Hi Riccardo. I just get this model and wanted to start it without any full assembly. Just for checking. And it didn't move. Just gave that strange sound like motor is blocked. Is there any secure blockade to remove before first use? Unfortunately no instruction manual was included. Thanks for help in advance.
Rafał Czyż hi. Unfortunally there is no secure. Try tacking of the belt and the disk. If this will not work try moving the lower cilinder with your hand. The last thing to do is open the belt trasmission and check it. Mine worked perfectly since the first time.
mica hai provato l' aspirazione delle polveri? sto valutando questo acquisto e sono indeciso tra disco abrasivo e nastro con la pietra ed il nastro sarei indirizzato verso pietra/nastro in modo da poterci affilare anche le punte del trapano.. ma è soggettivo
ThinKrea - Fai Da Te ciao, non l'ho provata con l'aspiratore. L'attacco per il nastro è in posizione molto scomoda e l'attacco per il disco è estremamente piccolo. Suppongo bisogna industriarsi un poco per la realizzazione di un doppio bocchettone. Comunque per affilare le punte per trapano ho visto in giro piccoli macchinari che affilano con il giusto angolo. Non so se la ruota abrasiva possa funzionare alla perfezione (non ho mai provato). Comunque sia il disco che la fascia sono grana 80, quindi inutili per cose così piccole.
Ciao! Grazie per il video Molto buona. È possibile saperne di più - come è fissato un disco rotondo? E c'è o non c'è un tappo per il trasporto. Oggi ho disimballato il mio TC SS 405, ma il nastro non si muove come se fosse qualcosa che lo tiene. Non ho istruzioni in russo(
Ciao, grazie per i complimenti. Il disco abrasivo é fissato con il velcro. Non ci sono manici per il trasporto. Se il nastro non si muove. Prova a levare il nastro e a far partire l'attrezzo. Prova a vedere se c'è qualcosa che impedisce ai rulli di girare liberamente. Hello, thanks for the compliments. The abrasive disk is fixed with Velcro. There are no handles for transport. If the belt does not move. Try to remove the belt and start the tool. Try to see if there is anything that clogs the rollers. Здравствуйте, спасибо за комплименты. Абразивный диск фиксируется липучкой. Нет ручек для транспортировки. Если ремень не движется. Попробуйте снять ремень и запустить инструмент. Засоряет ролики.
@@RiccardoPrezioso Grazie, domani cercherò di togliere la cintura ed eseguire. Pro disco rotondo, voglio dire, non è il velcro, e la base in metallo - è montato sulla parte superiore di vite?
Ho capito: c'è soltanto una vite che fissa il piatto metallico all'asse del motore. I understood: there is only a screw that fixes the metal plate to the motor axis.
Hi, the only problem I found is that the belt spins too slow to grind metal. It's projected for wood works. Over all it's a good product. Are you looking for one of this?
@@RiccardoPrezioso I have already bought this sander. I use it only for woodworks but i have some problem with bearing mount (this black part behind sander), you removed it in 6:57. By the way, have you mounted any fabric filter for this sander, which could collect dust during sandering?
Even if I've removed that bearing support I'm not aving any problems. I've not mounted any dust collector 'couse I don't need one. The dust is not too much and, when I need, I use my left hand to hold the vacuum 😅 I know it's not the best solution!
Tomas Garla hi, I took those measurations. It is 28cm high. (33 if we consider the wheel). The diameter of the cilinder is 6,01cm on the sides, and 6,02cm on the middle.
Ciao, nel video che ho realizzato al minuti 6:30 comincio a cambiare il nastro. È molto semplice. Vanno semplicemente smontate le viti e spostata la leva che tende il nastro.
Vous êtes un bricoleur averti ou un professionnel qui cherche un touret de ponçage à petit prix ? La machine EINHELL TC-US 400 est un excellent choix à faire. Au prix auquel il est vendu, cet outil fait bien son travail. pour plus d'info sur cette machine EINHELL , consultez cet article 123bricolage.fr/touret-de-poncage-einhell-tc-us-400/
is it possible to change belt tension? i think about this grinder, but i would need a good acces to belt edge so it must be a bit above the plane of original belt guide and i wonder if i could put something under belt to get it higher
Bogdan Bagniak Einhell projected the belt grinder only for 90cm belt. But belt tension could be changed making some modification at the spring mechanisem. I think that it could make it gain +o- 2 cm.
Que vous soyez un bricoleur averti ou un professionnel confirmé, vous devez disposer de bons outils de ponçage. Si vous êtes un professionnel du bois, ce genre de machines serait indispensable dans votre atelier. Les tourets de ponçage sont parmi les appareils incontournables dans de telles situations. continuez à lire cet article ici 123bricolage.fr/touret-de-poncage-vidaxl-142007/
this thing will break twice. First when you void your warranty and then when you try to fix it and in span of rage, you throw it against the wall full force because it doesn't want to come apart the way it was assembled. This is the most awful tool I used in my entire life and I suggest staying as far away as possible from einHELL products
!["สนธิ" ห่วงมีขบวนการปกป้อง "ทนายตั้ม" : [THE MESSAGE]](http://i.ytimg.com/vi/2GQNp3EoMc0/mqdefault.jpg)
I bought it today and it vibrates to much!! How can i fix this?
Hi, Check if everything is in place and identify what causes the vibration. Mine vibrates too but not to much! And it makes noise xD
RiKonstruction i checked it and i think i’am gonna fix it on the workbench! Tnx for the info and maybe i must work with the vibration it makes things more interesting XD.
@@KMCDM Aahhahahha. I suggest you to screw it on your work table. Make sure it's safe and... enjoy vibrations! XD
RiKonstruction i fixed it today and it works like a charm!! So if someone reads this, fix it on your table against vibrations!!
@@KMCDM Perfect I'll pin this comment up
Hello..
I have this Einhell sandingmach. now for a few years...i am verry pleased with it.
it is a great tool.
Walther
Mui buena compra tengo una desde el año 2016 i funsiona mui bien , le dejo algunos consejos 1 camvie la tuerca que sujeta el tirador de la lija de vanda por una con freno, se suele aflojar 2 apriete vien el tornillo de la lijadora de plato se suele aflojar , 3 engrase los rodamientos ya que vienen faltos de graza y por ultimo, rejistre vien la lijadora de cinta y jamas se podra detener como le ocurre a muchos , reitero una mui buena adquisición que la disfrute por muchos años suerte en su canal i a seguir.
Gracias por tu consejo! ¡Serán muy útiles para mí y para quienes sigan este canal!
Bought this one, expecting it tomorrow. Your video will be on repeat :D
Hope it will help you! This product is not one of my favorites, but it's the one I use most frequently
Hello, I just got this unit today and when I turned it on, I heard the humming of the motor but the belts did not turn. Any idea what could be wrong?
Hi. That's strange! Check the belt and the pulleys. Maybe something is not in place 😉
@@RiccardoPrezioso I rolled the belt by hand prior to starting it again and it worked fine afterwards.
Thank you so much. It was very helpfull about changing belt sander. tahnk you again....
You're welcome😉
I have the same sander under the Dirty Tools label, I’m really happy with mine and it’s more than up to the jobs I do on it. I too bought the adhesive disks when I first bought mine!
I'm happy too with mine! It would be better if it goes faster, but it's ok!
What the problem with the adhesive? I saw that it fit perfectly 🧐🧐
Yes, they do! I bought adesive one instead to velcro one, my fault.
Thanks for this video, i'm planning to buy one but i can't decide between the Einhell TC US 380 which is the newer model of the 400 or the Scheppach BTS800... Both are the same price :) Greets
You're welcome. They look like the same. I've never tried the sheppach one, but I think it will work as (bad😂) as the Einhell
@@RiccardoPrezioso Thanks for your reply :) The only difference i found is that the Scheppach is 2850 rpm and the Einhell only 1450. I can't find much info about the Tc Us 380 vs 400 vs Bts900 The 400 costs 125euro The 380: 150euro and the Scheppach is normally 200 but now in discount for 130 euro. Choices... UGH ;)
If the schep is 2850 rpm it will be superior. The main problem i complained is the slow speed of the motor.
@@RiccardoPrezioso Okay i'll probably go for the Schepp then. I will let you know when i tested it. G'night ;)
Thanks for the video! Nice job! Would you still suggest to buy it after few years of use? Thanks
Hi, you are welcome! I suggest to buy it only for hobby usage and only for wood. It spins too low for metal grinding.
Спасибо. Хороший ролик. Всё показано.
Thank you very much! Very helpful!
You're welcome 😉
Secondo te una macchina del genere si può sfruttare per usarla adagiandola su unlato, come levigatrice a nastro orizzontale ? ( devo spesso portare a squadro interni di pezzi curvi, e userei i rulli circolari come se fosse u a levigatrice a tamburo, perché posso acquistare questa usata a molto poco)
Ciao. Personalmente l'ho usata sia inclinata su un lato che sottosopra. Se riesci a fissarla a dovere, lasciandola libera di girare, non ci sono problemi. È un uso precario ma con un po' di accorgimenti puoi usarla tranquillamente!
Se poi hai voglia fammi sapere come ti sei trovato! Sto raccogliendo un po' di impressioni su questo prodotto! Te ne sarei grato.
Certo! Entro due settimane riscrivo qui sotto
@@simonecamplani2430 a presto allora 😉
I see it takes 150mm sanding discs. Are 6 inch discs the same? or does it have to be only 150mm?
Hi, yes 6 inch or 150mm discs are the same.
😉
@@RiccardoPrezioso Thank you. Great video
Thanks bro!
I used the same sander but I updated it with a proper dust suction. No more dust!
Yes, that's a good solution! I made the same and it goes well now
@@RiccardoPrezioso I used a fixed and flexible pipe which fit perfectly on my dust vacuum/suction. What did you attach?
I've deassembled the original suc duct and let it goes free. When I need I take the flexy pipe of my vacuum where I need. Not the best solution but it works
I was wondering to buy or not to buy it, cause i couldnt find out anywhere, if you could adapt the little table by the belt as you did in 3:45.
Now im getting it for sure, thank you !
You're welcome! I am really happy to know that my video is helpful in making this decision. I'm ready to answer any questions in the future! Thank for appreciating my work
you probably regret it. i do after i found out that i can stall this piece of shit with my hand
Hi Riccardo. I just get this model and wanted to start it without any full assembly. Just for checking. And it didn't move. Just gave that strange sound like motor is blocked. Is there any secure blockade to remove before first use? Unfortunately no instruction manual was included. Thanks for help in advance.
Rafał Czyż hi. Unfortunally there is no secure. Try tacking of the belt and the disk. If this will not work try moving the lower cilinder with your hand. The last thing to do is open the belt trasmission and check it. Mine worked perfectly since the first time.
Riccardo Prezioso all right. I moved the belt a little by hand and it worked.
Riccardo Prezioso thanks for help. Take care.
Rafał Czyż ohh! Perfect! U're welcome
I have the exact same problem. So, to solve it, you simply moved the belt by hand?
mica hai provato l' aspirazione delle polveri? sto valutando questo acquisto e sono indeciso tra disco abrasivo e nastro con la pietra ed il nastro sarei indirizzato verso pietra/nastro in modo da poterci affilare anche le punte del trapano.. ma è soggettivo
ThinKrea - Fai Da Te ciao, non l'ho provata con l'aspiratore. L'attacco per il nastro è in posizione molto scomoda e l'attacco per il disco è estremamente piccolo. Suppongo bisogna industriarsi un poco per la realizzazione di un doppio bocchettone.
Comunque per affilare le punte per trapano ho visto in giro piccoli macchinari che affilano con il giusto angolo. Non so se la ruota abrasiva possa funzionare alla perfezione (non ho mai provato). Comunque sia il disco che la fascia sono grana 80, quindi inutili per cose così piccole.
Grande ti ringrazio Riccardo, alla prossima 👍👍
Ciao! Grazie per il video Molto buona. È possibile saperne di più - come è fissato un disco rotondo? E c'è o non c'è un tappo per il trasporto. Oggi ho disimballato il mio TC SS 405, ma il nastro non si muove come se fosse qualcosa che lo tiene. Non ho istruzioni in russo(
Ciao, grazie per i complimenti.
Il disco abrasivo é fissato con il velcro.
Non ci sono manici per il trasporto.
Se il nastro non si muove. Prova a levare il nastro e a far partire l'attrezzo. Prova a vedere se c'è qualcosa che impedisce ai rulli di girare liberamente.
Hello, thanks for the compliments.
The abrasive disk is fixed with Velcro.
There are no handles for transport.
If the belt does not move. Try to remove the belt and start the tool. Try to see if there is anything that clogs the rollers.
Здравствуйте, спасибо за комплименты.
Абразивный диск фиксируется липучкой.
Нет ручек для транспортировки.
Если ремень не движется. Попробуйте снять ремень и запустить инструмент. Засоряет ролики.
@@RiccardoPrezioso Grazie, domani cercherò di togliere la cintura ed eseguire. Pro disco rotondo, voglio dire, non è il velcro, e la base in metallo - è montato sulla parte superiore di vite?
Ho capito: c'è soltanto una vite che fissa il piatto metallico all'asse del motore.
I understood: there is only a screw that fixes the metal plate to the motor axis.
Did you have any problems with this sander after buying?
Hi, the only problem I found is that the belt spins too slow to grind metal. It's projected for wood works. Over all it's a good product. Are you looking for one of this?
@@RiccardoPrezioso I have already bought this sander. I use it only for woodworks but i have some problem with bearing mount (this black part behind sander), you removed it in 6:57.
By the way, have you mounted any fabric filter for this sander, which could collect dust during sandering?
Even if I've removed that bearing support I'm not aving any problems. I've not mounted any dust collector 'couse I don't need one. The dust is not too much and, when I need, I use my left hand to hold the vacuum 😅 I know it's not the best solution!
Hello, could you measure the distance of belt from bottom to top ? otherwise whats the diameter of belt sander for tube mitering? thank you
Tomas Garla hallo, I am out for studing right now. I can take these measurement this weekend.
Tomas Garla hi, I took those measurations. It is 28cm high. (33 if we consider the wheel). The diameter of the cilinder is 6,01cm on the sides, and 6,02cm on the middle.
Ciao, mi sapresti dire come sostituire il nastro levigante per favore? Grazie
Ciao, nel video che ho realizzato al minuti 6:30 comincio a cambiare il nastro. È molto semplice. Vanno semplicemente smontate le viti e spostata la leva che tende il nastro.
this sander is ok for the price. dont expect something good as it looks
Exactly!😉
Explained a lot thanks
You are welcome. For any questions jusk ask! 😉
Vous êtes un bricoleur averti ou un professionnel qui cherche un touret de ponçage à petit prix ? La machine EINHELL TC-US 400 est un excellent choix à faire. Au prix auquel il est vendu, cet outil fait bien son travail. pour plus d'info sur cette machine EINHELL , consultez cet article 123bricolage.fr/touret-de-poncage-einhell-tc-us-400/
is it possibel to grind steel with this mashine..?
Yeah, possible, but too slow! I made a sword once.
Riccardo Prezioso would it work for a knife
Yes, sure! Not the best, but it will work!
is it possible to change belt tension? i think about this grinder, but i would need a good acces to belt edge so it must be a bit above the plane of original belt guide and i wonder if i could put something under belt to get it higher
Bogdan Bagniak Einhell projected the belt grinder only for 90cm belt. But belt tension could be changed making some modification at the spring mechanisem. I think that it could make it gain +o- 2 cm.
Que vous soyez un bricoleur averti ou un professionnel confirmé, vous devez disposer de bons outils de ponçage. Si vous êtes un professionnel du bois, ce genre de machines serait indispensable dans votre atelier. Les tourets de ponçage sont parmi les appareils incontournables dans de telles situations. continuez à lire cet article ici 123bricolage.fr/touret-de-poncage-vidaxl-142007/
Hi, Ricardo, can you grind steel with this?
Jaynnibal hi, yes you can, and olso i do. But it's too much slow. I'm not happy about this product.
Riccardo Prezioso Yep, looks pretty cheap to me... I'm looking for a decent belt grinder but it's a pain with a decent price...
Jaynnibal for wood working is really good. For metal worsk it's not. I know that is the best for that priece... I'll not modify wonder it runs faster.
Hola , se puede usar para hierro ?
Hola, se puede cortar sólo pequeñas cosas de aluminio. No hierro.
this thing will break twice. First when you void your warranty and then when you try to fix it and in span of rage, you throw it against the wall full force because it doesn't want to come apart the way it was assembled. This is the most awful tool I used in my entire life and I suggest staying as far away as possible from einHELL products
Wow to take the sanding belt off is quite a job, but thanks!
Thanks, really not easy
Thanks! Same as Ferm Belt sander
You're welcome. Yes, thay changed the color😂
does this sander got a place to put the vacuum cleaner?
Yes it does. You can see it at 6:38. It's the black pipe you can see near where I use the screw driver.
למה אין מחיר
Il prezzo
Ciao, credo di averla pagata una settantina di euro su Amazon qualche anno fa.
I used 5 minutes with a knife and I'm disappointed, flap disc and my loyal angle grinder einhell much better ;(
Yes, had the same problem. Not good for metal working😕
Abibas
Seeing this I know I will not buy one from this brand.
Too flimsy, not accurate…
Thank you for posting.
You're welcome! I don't like this sanding machine too. But I use it often anyway
è una rottura cambiare il nastro
Scarpia Verde si, già. Avrei anche preferito che girasse un pochino più veloce
Lijadora de banco mas mala que esta nunca habia tenido...! No la compren
Tienes razón. Tampoco estaba muy contento con esta lijadora
Einhell = toy!!
Incredibly weak machine. I regret buying it.
Yes, it's weak. Good for woodworking, non good for metal.
Price is 1/5th of an average for hobby use so what did You expect.
Ni desarmarlo sabes😂😂 pero está inútil!
Einhell 👎👎