hmm and i got a DEAD ps3 slim as well i was thanking about doing a pc like this as well just didn't know where to start now i know where to start thank you modstek keep the video's coming.. I really like how you take a older pc "or any pc" and do stuff like this just keeping them from going to the trash when nothing is wrong with the stuff to start with
I had a all-in-one that had a 32-in screen and the corner of it was all busted up. Motherboard and everything was fine but the screen was either nowhere to be found or they wanted too damn much for it. All the ones really have no repairability unless it's something on the motherboard.
Fyi HP boards will take anything up to 65 watts that's compatible. The board I have out of a Pavilion desktop takes 4th gen cpu's up to a i7 4770S. It's the same board used in the Envy line buy with some missing connectors. My plan for it is to build a super quiet and efficient gaming pc. Already got a Artic Alpine 12 passive cooler for it and 16gb of low profile memory (doesn't need low profile memory but a good start for whatever I build it into), just need to order fans and a psu. The board requires at least 2 fans to work properly so since they have to be on I'm going with BeQiuet Silent wings 3. I'm hoping the HD4600 graphics will be enough on the cpu, if not I'll probably be looking into a dedicated card that doesn't require extra power.
can we do this with a micro atx build i cannot aford mini itx there going over priced for some reason i dont have a pc case too rebuild it too i need a case i own a ps3 phat 80 gb model and a xbox 360 phat 20 gb model and i own a xbox 360 slim witch one of these case i can use for a micro atx i can buy a side adpter ribbon cable for my gpu . i be using a 1060 6gb card single fan one .i also use a old dual core pentium g4560 as well with 8gb ram i just need a spare hdd from some place sadly my nephew will use a hdd not sdd he wont tell the diffrance since he been using a xbox one s for 3 years .
*MODSTEK, PLEASE help me!... [sorry for my eng] ... I bought used m/board HP Elite 8100 ATX (full sized) without fan and pwr switch button* *Can you please ask on my questions:* *1) do you have scheme of pin-out (power button)? i wanna using regular PWR switch button which includes with ATX case (not HP)* *2) can i install custom cpu fan (intel/zalman) on this m/board HP Elite 8100? or this is m/board compatible with only originals hp parts?*
The HP 8100 uses a lot of proprietary parts to include the heatsink/fan, power, etc. There is a power cable adapter you can buy that a will allow you to use a regular ATX power supply. For the power switch the board has a 9 pin connector. The row with only four pins you should plug in the power switch connector to the two pins closest to the missing pin. The board may also have a label PW SW or something like that as well. USB and audio ports are standard on the board. Good luck to you 👍
The one shoutout from him on the first ps3 pc was plenty enough for me. Being a small budget channel and having a few of the big guys notice you makes you feel proud. I'm just curious if Mr. Linus ever sat back and chuckled at one of my videos.
I was trying to confuse youtubes auto generated subtitles but I failed. Yeah I'm sorry about that it was rushed video with not much footage of the actual build. I'm going to probably finish up this year and Start watching videos again instead of making them especially with the prices of tech these days
2012 hp motherboard came out of a trash picked all in one desktop with a smashed screen bad hard drive my curiosity has me wondering though if i can get it going and make something cool out of it also i have a broken ps3 slim it won't turn on for more than three seconds and i covered all the basic diagnostics maybe if we combine the two just might make something cool what do you think it really takes some tinkering for me to see if this will even work like will it fit can i get some kind of graphics to work how can i keep it cool and on and on and on i replaced the dual core i3 that was in here with an i5 3470 and that was not on the upgrade sheet because it goes beyond a 65 watt threshold and since i don't have an mxm graphics card i'm using my gt 1030 with the beast external graphics just to review i harvested parts out of a broken one of these i had no use for nor the desire to hunt down another screen i then met larry bird not a boston celtics larry bird but to hp all in one motherboard bird bird's word you better get your curd i don't know what you heard oh my gosh this is quite absurd and i really didn't even know where i was going with this anywho moving on for graphics i mentioned i'm using the beast egpu that is attached to the mini pcie slot and powered by a 12 volt rechargeable power bank i have and i know what you're thinking that's not not power for graphics card play any kind of games but hey we'll see back to the broken ps3 i've taken all the components out to review or repair at a later time as for the case well i'm using a hole saw to fit the cpu cooler as for this as a ps3 slim not much room inside for the dark flash cooler i chose that logo cutout isn't as easy i thought and i wish i had another shot at it but it's passable i think well the unbelievable tech prices right now uh in the present time and upgrades like this ssd ram are costly so when my instagram buddy offers up a donation well i happily accept and i show my appreciation so if you're ever in detroit area need some awesome landscaping give this guy a try link will be in the description if you're interested this is a king shark sata 3 msata 250 gig internal solid state drive and that should just work fine and dandy for the slim down windows 10 spectre edition and some games this has got a nice clean little look to it doesn't it 16 gigabytes sure beats four gigabytes ram that was in here and a g skill 1600 were not cheap but they were very needed okay where was i oh painting yeah the case must be sanded smooth and clean and wait for it to dry or you'll have to do this all over again like i did oh man i'm going backwards now but hey what about rgb lights ah yes my first thought was using the cheap headphone stand for the lights front usb and the plastic itself for the light deflector it's a great idea and work although i want a remote for the lights and i picked up some rainbow rgb chasing strips cheap i scrapped the idea but will work great on a future project so if you don't mind tinkering around with broken electronics and leftover parts cutting trimming sanding painting plastic then a diy mod like this might be for you i wish i had a plan to uh for you to follow however i'm bad in math and measuring and stuff and uh can only eyeball up stuff i also know you can do a better job and take them to see your very own creations uh just perhaps take a peek at uh what i've done so far so oh hey uh-uh no no don't go anywhere this ain't the end it's coming up oh so i want to thank you so much for watching and i hope you liked this video if so you know please do share it i appreciate that uh 130 plus frames on valerie it's crazy to think that this thing runs off a 90 watt laptop charger especially when the cpu is 77 watts alone oh well it runs cooler runs quick i like it i hope you do take it around with your ps3 one day
![TEEDEE TADA - DIAMOND NARAKORN X LEGO LYKN [Special Dance Performance]](http://i.ytimg.com/vi/QgtZedFeumA/mqdefault.jpg)
It’s 12:30am but this seemed more important
im on central time. sorry bout that
that isn't late
Very neat setup. That CPU heatsink and ps3 looks like it was built for each other.
It turned out better than I expected
@@modstek you "winging it" turns out better than my intentional and planned builds. Keep up the great work.
I was thinking about doing the opposite, taking the insides of my PS3 and puting it in a giant PC tower with my PC, so it becomes a Dual System Tower.
If you find out how to do this please tag me! I have my ps3 and still want to put it to use!
that would also be cool!
@@emmanuelladely903 just get a pc case built for 2 motherboards
Awesome and Amazing as usual :-)
hmm and i got a DEAD ps3 slim as well i was thanking about doing a pc like this as well just didn't know where to start now i know where to start thank you modstek keep the video's coming.. I really like how you take a older pc "or any pc" and do stuff like this just keeping them from going to the trash when nothing is wrong with the stuff to start with
Excellent build
Awesome as always
The bird is really the word. Awesome build.
lol yep
Hey I realized I haven't kept up with the channel for a while ! I knew it so much videos I gotta watch !!
You are incredible.
Hola Soy Argentino desde hace años veo tus videos y ME ENCANTAN 😍😍😍😍😍
Yay! Been looking forward to this.
Nice work!
Thanks!
Bro made the physical ps3 pro
I did it and it was really awesome to play on it, it’s just for 40$ and that was so fun to play it💞 thank you very much for this video❤
the king of mods returns.
Well bro, youre playing with some watts there, impressive
Wow, very impressive modstek!
Thank you
Load batocera onto it with ds4/5 so you can use a controller too.
So kewl!
Ok I’ve been searching this on TH-cam but couldn’t find anything. Is it possible to download windows 10 on one of these?
This sounds like a really good idea!
I had a all-in-one that had a 32-in screen and the corner of it was all busted up. Motherboard and everything was fine but the screen was either nowhere to be found or they wanted too damn much for it. All the ones really have no repairability unless it's something on the motherboard.
Holy shit this is amazing
It looks insane!
It reminds me of one of those muscle cars, with the hood cut off for the engine to breathe...
It's literally the same here.😍
cool video as usual
If you had the resources and could do it over, would you recommend a Tiger Lake transplant?
1030 still kicking... especially after these GPU shortages.
looks great
Looks pretty cool! but it looks that has no airflow at all.
Cpu is 25c idle and the gpu is on the outside 36c idle. Motherboard heat if any gets blown out all the vent holes.
Awesome 👍
The bird is the word
hey, im from michigan too. hook up a gpu to the m.2 pcie slot. its 4x. meaning way better performance
I bet this runs better than my pc now 😅
Fyi HP boards will take anything up to 65 watts that's compatible. The board I have out of a Pavilion desktop takes 4th gen cpu's up to a i7 4770S. It's the same board used in the Envy line buy with some missing connectors. My plan for it is to build a super quiet and efficient gaming pc. Already got a Artic Alpine 12 passive cooler for it and 16gb of low profile memory (doesn't need low profile memory but a good start for whatever I build it into), just need to order fans and a psu. The board requires at least 2 fans to work properly so since they have to be on I'm going with BeQiuet Silent wings 3. I'm hoping the HD4600 graphics will be enough on the cpu, if not I'll probably be looking into a dedicated card that doesn't require extra power.
Did u use PS3 GPU for pc games??
is your gdc beast using ngff?
how do you line up the cut for the cpu heatsink, did you made the cut and then placed the motherboard or vice versa?
You make some really great videos! So curious how you get the stock ps3 power button to work to power on the computer..
The motherboard is a hp all in one and had a similar power switch. It's tucked under the ps3 power button
really i wanna this
can we do this with a micro atx build i cannot aford mini itx there going over priced for some reason i dont have a pc case too rebuild it too i need a case i own a ps3 phat 80 gb model and a xbox 360 phat 20 gb model and i own a xbox 360 slim witch one of these case i can use for a micro atx i can buy a side adpter ribbon cable for my gpu . i be using a 1060 6gb card single fan one .i also use a old dual core pentium g4560 as well with 8gb ram i just need a spare hdd from some place sadly my nephew will use a hdd not sdd he wont tell the diffrance since he been using a xbox one s for 3 years .
hey man, do you think you could give me the parts from the PS3? love the video by the way
Nice
Thanks
Awesome
*MODSTEK, PLEASE help me!... [sorry for my eng] ... I bought used m/board HP Elite 8100 ATX (full sized) without fan and pwr switch button*
*Can you please ask on my questions:*
*1) do you have scheme of pin-out (power button)? i wanna using regular PWR switch button which includes with ATX case (not HP)*
*2) can i install custom cpu fan (intel/zalman) on this m/board HP Elite 8100? or this is m/board compatible with only originals hp parts?*
The HP 8100 uses a lot of proprietary parts to include the heatsink/fan, power, etc. There is a power cable adapter you can buy that a will allow you to use a regular ATX power supply. For the power switch the board has a 9 pin connector. The row with only four pins you should plug in the power switch connector to the two pins closest to the missing pin. The board may also have a label PW SW or something like that as well. USB and audio ports are standard on the board. Good luck to you 👍
What resolution? And what FPS?
awesome
2:00 what tool have you used to cut the logo?
small file
I used a small drill for outlining tiny holes and then used a small file set to clean it up
Wooooow 🤩
Hello im planning on transfering my old office pc with a gtx 1050ti would it fit?
I think your title should be "how to use a ps3 enclosure around a pc"....otherwise its misleading....
You save the PS3 before throw it to junkyard :)
The Coolest Playstation is a PC
i hate rgb i like lights but rgb gives me headaches and yes i do have rgb mechanical keyboards but have them as a single color
Good to know dragon rage 173. Will keep that in mind.
I have a remote control for the lights I can leave them off or just a single color, or dimm them.
I have an old ps3 slim what would it take to get a pc built in it
where the psu ?
Someone’s gotta send this to Bitwit
Edit: the video, not the pc
The one shoutout from him on the first ps3 pc was plenty enough for me. Being a small budget channel and having a few of the big guys notice you makes you feel proud. I'm just curious if Mr. Linus ever sat back and chuckled at one of my videos.
Any chance I can send you something to micro-solder up for me? I'd pay, of course.
Micro solder I can barely read this comment on my phone without glasses. I wish I could do all that
Extremely cool video. However, there are several points in the video where you are talking so fast that it's hard to understand & follow.
I was trying to confuse youtubes auto generated subtitles but I failed. Yeah I'm sorry about that it was rushed video with not much footage of the actual build.
I'm going to probably finish up this year and Start watching videos again instead of making them especially with the prices of tech these days
Nice mod
PS3 or PC?
How about PC3?
xD
Any chance of you selling it....
idk it's one of things where if you add up the parts to replace them and get a few bucks profit it ends up not worth it for the buyer I imagine.
Bro uh genius. Might pay him to built to turn my ps3 to pc
i have the same ssd from amazon 2:24
Like 👍👍👍👍
Run RPCS3 on this and then you good
It's not a ps3... it's a computer.
I can barely understant what the hell is he saying
2012 hp motherboard came out of a trash picked all in one desktop with a smashed screen bad hard drive my curiosity has me wondering though if i can get it going and make something cool out of it also i have a broken ps3 slim it won't turn on for more than three seconds and i covered all the basic diagnostics maybe if we combine the two just might make something cool what do you think it really takes some tinkering for me to see if this will even work like will it fit can i get some kind of graphics to work how can i keep it cool and on and on and on i replaced the dual core i3 that was in here with an i5 3470 and that was not on the upgrade sheet because it goes beyond a 65 watt threshold and since i don't have an mxm graphics card i'm using my gt 1030 with the beast external graphics just to review i harvested parts out of a broken one of these i had no use for nor the desire to hunt down another screen i then met larry bird not a boston celtics larry bird but to hp all in one motherboard bird bird's word you better get your curd i don't know what you heard oh my gosh this is quite absurd and i really didn't even know where i was going with this anywho moving on for graphics i mentioned i'm using the beast egpu that is attached to the mini pcie slot and powered by a 12 volt rechargeable power bank i have and i know what you're thinking that's not not power for graphics card play any kind of games but hey we'll see back to the broken ps3 i've taken all the components out to review or repair at a later time as for the case well i'm using a hole saw to fit the cpu cooler as for this as a ps3 slim not much room inside for the dark flash cooler i chose that logo cutout isn't as easy i thought and i wish i had another shot at it but it's passable i think
well the unbelievable tech prices right now uh in the present time and upgrades like this ssd ram are costly so when my instagram buddy offers up a donation well i happily accept and i show my appreciation so if you're ever in detroit area need some awesome landscaping give this guy a try link will be in the description if you're interested this is a king shark sata 3 msata 250 gig internal solid state drive and that should just work fine and dandy for the slim down windows 10 spectre edition and some games this has got a nice clean little look to it doesn't it 16 gigabytes sure beats four gigabytes ram that was in here and a g skill 1600 were not cheap but they were very needed
okay where was i oh painting yeah the case must be sanded smooth and clean and wait for it to dry or you'll have to do this all over again like i did oh man i'm going backwards now but hey what about rgb lights ah yes my first thought was using the cheap headphone stand for the lights front usb and the plastic itself for the light deflector it's a great idea and work although i want a remote for the lights and i picked up some rainbow rgb chasing strips cheap i scrapped the idea but will work great on a future
project
so if you don't mind tinkering around with broken electronics and leftover parts cutting trimming sanding painting plastic then a diy mod like this might be for you i wish i had a plan to uh for you to follow however i'm bad in math and measuring and stuff and uh can only eyeball up stuff i also know you can do a better job and take them to see your very own creations uh just perhaps take a peek at uh what i've done so far
so
oh
hey uh-uh no no don't go anywhere this ain't the end it's coming up
oh
so
i want to thank you so much for watching and i hope you liked this video if so you know please do share it i appreciate that uh 130 plus frames on valerie it's crazy to think that this thing runs off a 90 watt laptop charger especially when the cpu is 77 watts alone oh well it runs cooler runs quick i like it i hope you do take it around with your ps3 one day
Thanks for the thanscription. That compensate the fact that you can't vocalize properly
top👌
👍