I've been struggling with this for hours and putting the 2 same ram sticks in sequential slots(A1,A2) fixed it. Thank you. I'm just glad I got it to boot, so I probably won't even try to overclock at this point.
I was struggling to get 4x 32gb running @ 6000mhz. My Asrock board detects all 4 dimm modules no problem but it was only run 3600mhz regardless of what profile I selected. That is until I modified the impedence settings shown here. After that, EXPO profile worked for me. Thanks alot dood.
I was lucky to immediately order a set of 2x48GB 6800 rated memory. I run mine at 5800 on an x670E Art Pro. So good, but not ideal. Always interested to see if there are better options, like these. Thanks for experimenting! 💯👍
@@peterpetwr2046 The kit I mentioned in my post. The problem is the somewhat clunky hybrid nature of the 2-die 7950x3d. Also, the Pro Art motherboard I use was not designed to be a tweakers paradise.
I ran 4x16 gb of ddr5 at 6000 mt/s for 15 months JUST FINE. Then one day I started having random BSODs. I think my latest BIOS update changed some settings that made my rig unstable. I will try your settings and report back. I will just go with 2x48 gb later, but maybe these impedance values will keep me going for now.
Running 4 x8-32gb Am4 cl16 3600mhz. Msi tomahawk trained all 4 properly. Expo runs them at rated spec. I had no issues or had to tweak anything. I am upgrading to Am5 atm and believe 6000mhz for a rzyen x3d is 1-1. Anything more runs 1-2. Basically infinity fabric won’t work. Needs a 1-1 to work. Good setup. Little overkill at 8000 but can run at 6000 1-1 on all 4 sticks. 👍🏼
are you sure youre actually talking about ddr5 because your first few words are talking about 3600mhz. ddr5 doesn't run at that speed natively as 3600mhz is the ddr4 sweet spot and hasn't had training issues since like 2015. ddr4 is also NOT expo related whatsoever. lastly, amd has stated multiple times that ddr5 6000 is the sweet spot for all 7000 series cpus. you can currently run up to 8000mhz board and agesa bios dependent but 7000 cpus memory controller gives minimal gains above 6000mhz. you will NOT be able to run 8000mhz with 4 stick whatsoever but ryzen 9000 may support those speeds as x870e has a better memory controller.
Subbing, hoping you can/will answer my question/problem. I pulled the trigger on the MSI MEG X670E ACE M/B and went hog wild on the M.2 slots getting 6 Kingston Fury Renegade 2280 2TB NVMe's and put them on the board (4) and the eXpander Z card (2) and they all went into a 6TB RAID 10 array. Don't ask. I've been building my own for 30 years and a huge redundant array like that has been a dream of mine since my first build in 1992 with a Cyrix CPU and DOS 5 with a gigantic 12MB of RAM I used to load all of X-Wing into a Ramdrive and run it from DOS. I also bit the bullet and Got a Zotac RTX 4090 gaming GPU. Here's what I originally did regarding the RAM: I bought a 2 stick 32G kit of the G.Skill Trident Z5 NEO DDR5 6000 and ran Expo (6000) in the bios and it ran great. However, thinking Cities Skylines would run better with twice as much RAM, I bought a second kit, same RAM just made 1 month later and it ran well for awhile. Then a Win10 update tried to restart and it wouldn't get out of BIOS. I had to shut down (cold boot, wait 10 seconds) and then the BIOS would sometimes stick on the memory test (15) for more than two minutes and I'd cold boot it again and sometimes it would go on through to Windows. Then the machine would just reboot for no reason at all. Sometimes I would get a BSOD saying IRQ_NOT_LESS_OR_EQUAL and a few more, all of them relating to a possible RAM problem. So I took the second pair out and it ran great on Expo again. I called G.Skill and the guy there said they won't run 4 sticks at 6000, I'll have to run something less if I want to run 64Gb with the 4 sticks. And whaddaya know, the MSI specs for the M/B says that to run 4 sticks I must be at 5400. Which is what I'm running now. The machine is stable, no more crashes, but it's sluggish as hell. CPU-Z is showing CAS# Latency of 46 clocks, RAS# to CAS# Delay of 45, RAS# Precharge of 45, Cycle Time of 87 and Bank Cycle Time of 132. You know those Expo timings. Seems like it ran better on 32G running at 6000 than twice the RAM running at 5400. Is there something I can do to speed up this build with what I've got? Or should I try to sell this RAM and go for a 2 x 48G set I can run Expo with?
You have to adjust the ODT values as shown in the video. What to adjust them to depends heavily on the RAM kits as well as the motherboard. It will take some trial and error. I recommend first downloading Zentimings from techpowerup to get the baseline values. I'll cover this later this evening on the livestream.
@@GameTechReviews I've got it running at 6000 now and I'm using the exact ODT values I see at 9:50 in this video. However I let the M/B set the timings, it's not running Expo as it won't even post into the BIOS. tCL, tRCDWR, tRCDRD and tRP are all at 50, tRAS is 96 and tRC is 146. The thing I missed was running the RAM in the same channels as you did. I kept the set made in September last year in the A2-B2 slots and the October sets in the A1-B1 slots. When I got them rearranged it posted to code 4F, but I cold booted it and it went on through the second time. Day 2 now and no BSOD's or random reboots. Went through BIOS and set my fan speeds and it posted fine. I'm running two Noctua NF-F12's and they're quite loud at 2500 rpm but since they blow right at the Noctua NH-D15s cooler I have them set to 40% at 70C and ramp up to 100% only until CPU gets to 88C. The Noctua NF-A15's on the cooler itself are very quiet even at full speed (1500) and the 3 Fractal Define 7 XL case fans bringing the rest of the air in are set to voltage on the controller that came with the case. She's whisper quiet now until I run Kombustor CPU burn.
@@ericwillis Hi I loaded ASUS latest BIOs for TUF 650 Gaming WiFi MB. This allowed me to manually select DDR5 6000 speed. Don't enable the XMT and it should be OK. :)
so I am building a ws for unreal.. And I can not find an available 128gb kit(4x32). Can I buy The same brand/speed/cl/capacity kit 2 times? e.g 2 x (2x32gb) Corsair vengeance ddr5? is it that bad?
That's what I did. I bought 2 of the same 48gb kit. Make sure you install them correctly. One kit per channel (as shown in the video). If you are building a true workstation or HEDT which implies Threadripper, then Gskill does sell a 128gb RDIMM kit or even 192gb kit.
You expected to run 8k on 4 sticks on infinity fabric 2000 AMD? Or were you thinking that 8k rated ram would give a higher probability of success to reach the 6000's?
I was trying to do 8000MT/s on 4 sticks. It seems the limiting factor is the wire traces on the motherboard. I've shown how to do 192GB at 5600 and 6000 in a previous video. I think the newer X870E motherboards should hopefully improve 4 stick setups.
@@GameTechReviews going over 6k (6400 max ish) breaks the infinity fabric timing chain. Even if you won the silicone lottery to manage 8k on 4 sticks, it would be crippled from having to downclock the fabric chain. I dont see the point aside from just doing it for shlits and giggles.
There is no knowing for sure. It requires trial and error which is one of the reasons there is a whole lack of content out there regarding ODT values. I'm one of the few that has videos on this subject.
You can expect 4800MT/s to work fine. With The new 9000 series 5200MT/s works and in some cases 5600MT/s. 6000MT/s is possible but it requires more advanced knowledge. That being said the X870E motherboards might improve the ability to run 4 sticks of DDR5. Tune into the weekly livestream on Thursday where I'll be discussing this in more detail.
@@The2TheOnly do you know if support is planned or is it a limitation of the current ryzen cpus/their memory controllers or even a platform limitation?
@@The2TheOnly I just did a quick search and found an article titled "MSI Intel and AMD Motherboards Now Fully Support Up to 256GB of Memory Capacity" on MSI's site (not sure if I can paste the link or will some spam filter remove the reply) so I guess it will be super on current hw (or at least some of it) eventually
They do work. At 3600 or 4800 MT/s. The thing is that anything above that is over clocking. and you can get them to work if you play around with the OC settings. Even factory expo is still over clocking.
Or you can just get CMP96GX5M4B6000C30 and have zero issues or messing around....Literally just install them in order, hit XMP, and off you go. 7800X3d, MSI B650 Edge wifi, 7900XTX.
@@PC_Drivexmp and expo are just settings profiles. While being tuned for one or the other, they can work on either, so long as said settings work. Timings, power, ect.
I've been struggling with this for hours and putting the 2 same ram sticks in sequential slots(A1,A2) fixed it. Thank you.
I'm just glad I got it to boot, so I probably won't even try to overclock at this point.
Just got mine too boot aswell, since it’s booted take it as a checkpoint. If all goes wrong just head back into those same settings.
I was struggling to get 4x 32gb running @ 6000mhz. My Asrock board detects all 4 dimm modules no problem but it was only run 3600mhz regardless of what profile I selected. That is until I modified the impedence settings shown here. After that, EXPO profile worked for me. Thanks alot dood.
What CPU do you use?
Thank you. Learnt something new. Putting the old ram and new ram together in the channels was something I didn’t know about.
I was lucky to immediately order a set of 2x48GB 6800 rated memory. I run mine at 5800 on an x670E Art Pro. So good, but not ideal. Always interested to see if there are better options, like these. Thanks for experimenting! 💯👍
Better then 5200 so not bad
5800 seems low what kit did you get?
@@peterpetwr2046 that kit will most likely top out at 6000-6200 with tightened timings. 6400 if he’s lucky
@@peterpetwr2046 The kit I mentioned in my post. The problem is the somewhat clunky hybrid nature of the 2-die 7950x3d. Also, the Pro Art motherboard I use was not designed to be a tweakers paradise.
I am currently rocking 2x16g 6400mhz ram and it's working smoothly with my 7800x3D. So far it's enough ram but I'm tempted to grab another kit
Same but not really necessary
I ran 4x16 gb of ddr5 at 6000 mt/s for 15 months JUST FINE. Then one day I started having random BSODs. I think my latest BIOS update changed some settings that made my rig unstable. I will try your settings and report back. I will just go with 2x48 gb later, but maybe these impedance values will keep me going for now.
Running 4 x8-32gb Am4 cl16 3600mhz. Msi tomahawk trained all 4 properly. Expo runs them at rated spec. I had no issues or had to tweak anything. I am upgrading to Am5 atm and believe 6000mhz for a rzyen x3d is 1-1. Anything more runs 1-2. Basically infinity fabric won’t work. Needs a 1-1 to work. Good setup. Little overkill at 8000 but can run at 6000 1-1 on all 4 sticks. 👍🏼
are you sure youre actually talking about ddr5 because your first few words are talking about 3600mhz. ddr5 doesn't run at that speed natively as 3600mhz is the ddr4 sweet spot and hasn't had training issues since like 2015. ddr4 is also NOT expo related whatsoever.
lastly, amd has stated multiple times that ddr5 6000 is the sweet spot for all 7000 series cpus. you can currently run up to 8000mhz board and agesa bios dependent but 7000 cpus memory controller gives minimal gains above 6000mhz.
you will NOT be able to run 8000mhz with 4 stick whatsoever but ryzen 9000 may support those speeds as x870e has a better memory controller.
@@larrydysondev yes first I was talking about ddr4. I am now running 7900x3d with two 32gb sticks (64gb) running 6000mhz expo ddr5.
Subbing, hoping you can/will answer my question/problem. I pulled the trigger on the MSI MEG X670E ACE M/B and went hog wild on the M.2 slots getting 6 Kingston Fury Renegade 2280 2TB NVMe's and put them on the board (4) and the eXpander Z card (2) and they all went into a 6TB RAID 10 array. Don't ask. I've been building my own for 30 years and a huge redundant array like that has been a dream of mine since my first build in 1992 with a Cyrix CPU and DOS 5 with a gigantic 12MB of RAM I used to load all of X-Wing into a Ramdrive and run it from DOS. I also bit the bullet and Got a Zotac RTX 4090 gaming GPU.
Here's what I originally did regarding the RAM: I bought a 2 stick 32G kit of the G.Skill Trident Z5 NEO DDR5 6000 and ran Expo (6000) in the bios and it ran great. However, thinking Cities Skylines would run better with twice as much RAM, I bought a second kit, same RAM just made 1 month later and it ran well for awhile. Then a Win10 update tried to restart and it wouldn't get out of BIOS. I had to shut down (cold boot, wait 10 seconds) and then the BIOS would sometimes stick on the memory test (15) for more than two minutes and I'd cold boot it again and sometimes it would go on through to Windows.
Then the machine would just reboot for no reason at all. Sometimes I would get a BSOD saying IRQ_NOT_LESS_OR_EQUAL and a few more, all of them relating to a possible RAM problem.
So I took the second pair out and it ran great on Expo again. I called G.Skill and the guy there said they won't run 4 sticks at 6000, I'll have to run something less if I want to run 64Gb with the 4 sticks. And whaddaya know, the MSI specs for the M/B says that to run 4 sticks I must be at 5400.
Which is what I'm running now. The machine is stable, no more crashes, but it's sluggish as hell. CPU-Z is showing CAS# Latency of 46 clocks, RAS# to CAS# Delay of 45, RAS# Precharge of 45, Cycle Time of 87 and Bank Cycle Time of 132. You know those Expo timings. Seems like it ran better on 32G running at 6000 than twice the RAM running at 5400.
Is there something I can do to speed up this build with what I've got? Or should I try to sell this RAM and go for a 2 x 48G set I can run Expo with?
You have to adjust the ODT values as shown in the video. What to adjust them to depends heavily on the RAM kits as well as the motherboard. It will take some trial and error. I recommend first downloading Zentimings from techpowerup to get the baseline values. I'll cover this later this evening on the livestream.
@@GameTechReviews I've got it running at 6000 now and I'm using the exact ODT values I see at 9:50 in this video. However I let the M/B set the timings, it's not running Expo as it won't even post into the BIOS. tCL, tRCDWR, tRCDRD and tRP are all at 50, tRAS is 96 and tRC is 146.
The thing I missed was running the RAM in the same channels as you did. I kept the set made in September last year in the A2-B2 slots and the October sets in the A1-B1 slots. When I got them rearranged it posted to code 4F, but I cold booted it and it went on through the second time.
Day 2 now and no BSOD's or random reboots. Went through BIOS and set my fan speeds and it posted fine. I'm running two Noctua NF-F12's and they're quite loud at 2500 rpm but since they blow right at the Noctua NH-D15s cooler I have them set to 40% at 70C and ramp up to 100% only until CPU gets to 88C. The Noctua NF-A15's on the cooler itself are very quiet even at full speed (1500) and the 3 Fractal Define 7 XL case fans bringing the rest of the air in are set to voltage on the controller that came with the case. She's whisper quiet now until I run Kombustor CPU burn.
I'm running 4 x 32gb sticks @ 6000. Took a few hours and some research. Seems there's some impedances that need adjustments if your mobo allows it.
I'm running DDR5 6000 4x16gb, no problems with my 7800X3D.
Hey man could you share what you did with yours? I'm running the same setup I've tried everything can only get it stable 5400mhz
+1 on how you got this set up to work??
@@ericwillis Hi I loaded ASUS latest BIOs for TUF 650 Gaming WiFi MB. This allowed me to manually select DDR5 6000 speed. Don't enable the XMT and it should be OK. :)
@@xoXyrus Sorry I missed your reply. I have responded to same question from another - see below :)
Great video. Do you think 192GB @ 6000MT/s stable is at all possible?
I've covered that in a previous video, as mentioned in the conclusion.
itll go downto base clock speeds, same as DDR4
so if you only have 2 sticks do you put them in same channel (both in A/B) or 1 stick per channel?
1 per channel. (A2, B2)
@@GameTechReviews ok thanks
so I am building a ws for unreal.. And I can not find an available 128gb kit(4x32). Can I buy The same brand/speed/cl/capacity kit 2 times? e.g 2 x (2x32gb) Corsair vengeance ddr5? is it that bad?
That's what I did. I bought 2 of the same 48gb kit. Make sure you install them correctly. One kit per channel (as shown in the video). If you are building a true workstation or HEDT which implies Threadripper, then Gskill does sell a 128gb RDIMM kit or even 192gb kit.
you should try 256gb - it is supported but parts may be tough to find - and pricey but eventually that is where things are going
r there even 256 kits out there
as far as I know not until 2025
Having audio stuttering using 96gb kit with manual timings on a 7950x. What timing can I mess w to remove the stuttering ?
downclock the fclk maybe?
Have you tried running it without manual timings?
@@GameTechReviewsin other words... leave it the funk alone?
You expected to run 8k on 4 sticks on infinity fabric 2000 AMD? Or were you thinking that 8k rated ram would give a higher probability of success to reach the 6000's?
I was trying to do 8000MT/s on 4 sticks. It seems the limiting factor is the wire traces on the motherboard. I've shown how to do 192GB at 5600 and 6000 in a previous video. I think the newer X870E motherboards should hopefully improve 4 stick setups.
@@GameTechReviews going over 6k (6400 max ish) breaks the infinity fabric timing chain. Even if you won the silicone lottery to manage 8k on 4 sticks, it would be crippled from having to downclock the fabric chain. I dont see the point aside from just doing it for shlits and giggles.
How do you know which on-die termination related values will work?
There is no knowing for sure. It requires trial and error which is one of the reasons there is a whole lack of content out there regarding ODT values. I'm one of the few that has videos on this subject.
There is a computer with a 192gb of ram (2 boxes of 96gb 48x2 ram g skill trident z5 6400)
Are you referring to my video from January?
No, I found it in my nearby computer store.
I need 128 GB do u have a recommendation for fast ram?
You can expect 4800MT/s to work fine. With The new 9000 series 5200MT/s works and in some cases 5600MT/s. 6000MT/s is possible but it requires more advanced knowledge. That being said the X870E motherboards might improve the ability to run 4 sticks of DDR5. Tune into the weekly livestream on Thursday where I'll be discussing this in more detail.
@@GameTechReviews Looks like Z790 128GB 3200MT DDR4 would run better.
Can they be downclocked ?
Would 192GB ram work, too? I want it in a non 3D processor.
See my video on 192gb from January. I've covered that topic extensively at this point. It's listed in the video description, at the bottom.
would like to see 4x 48, IIRC the ddr can go to 128gb dims.
I have a video from January this year showing 192gb at 6000mhz.
Can it be done on an x670e hero?@@GameTechReviews
something for nvidia ?
What about 4x64GB?
Not supported yet
@@The2TheOnly 🥺
@@The2TheOnly do you know if support is planned or is it a limitation of the current ryzen cpus/their memory controllers or even a platform limitation?
@@The2TheOnly I just did a quick search and found an article titled "MSI Intel and AMD Motherboards Now Fully Support Up to 256GB of Memory Capacity" on MSI's site (not sure if I can paste the link or will some spam filter remove the reply) so I guess it will be super on current hw (or at least some of it) eventually
I thought channel 1 are slots 1, 3. Channel 2: 2, 4.
No channel 1 is slot 2 & 4 = a2 b2
Channel 2 is 1 & 3
@@silfrido1768 He is refering to channels, wouldn't memory Channel 1 be slots 1 and 2 and memory Channel 2 slots 3 and 4?
Channel A is A1 and A2, Channel B is B1 and B2.
4*2R 192GB @4800mhz only.
But the question IS: why they fucking sell 4 dimms @8000mhz if they will never work on a x4 config??
They do work. At 3600 or 4800 MT/s. The thing is that anything above that is over clocking. and you can get them to work if you play around with the OC settings. Even factory expo is still over clocking.
I've got not idea what those ODT values mean tbh 😂😂
Are Hynix better?
These are the questions that are addressed every Thursday during my youtube livestream.
@@GameTechReviews Gonna mark my calendat for next one
Or you can just get CMP96GX5M4B6000C30 and have zero issues or messing around....Literally just install them in order, hit XMP, and off you go. 7800X3d, MSI B650 Edge wifi, 7900XTX.
XMP on AMD?
@@PC_Drivexmp and expo are just settings profiles. While being tuned for one or the other, they can work on either, so long as said settings work. Timings, power, ect.
@@WhirlwindOfWTF I guess so. I just happened to get the worst ram.
Damn bro just buy a 4 stick kit.
I don’t think your suppose to toss in ram like that. You should have order 4 news sticks and took the black ones out.
They don't really make 4 stick kits for DDR5.
He literally explains that away within the first two minutes… 😑