Nissan NP300 lacking in power cutting back How to fix
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- Welcome to our channel subscribe for all our how to repair video’s which will save you a fortune in future repairs. You are more than welcome to give me a call on 01274 640028 or email westyorkshireengines@gmail.com for free advice and support please like comment and share this video to help others not waste money on what is not needed. Thanks for watching Des
Honest with integrity and not many other so called mechanics could say that
Thank you so much for your kind words as I really did nearly through in the white towel cheers buddy all the best Des
Great to see you Des. Please please please more content!! The trade miss you mate!!
Thank you mate really means a a lot after such a SH@t year or so
@@westyorkshireengineservice9160 Your help and expertise give us all hope mate, More than that we rely on you!
As always straight forward and understandable, keep that content going mate.....
Cheers mate feedback means a lot to us so thank you Des
I've got a 2016 Tekan model, manual... I often give mine a blast as most days I do the same shortish journey to and from work. Any advice on getting the most out of my truck?
Mikor kell figyelni a EGR hűtőre?
It appears I've arrived before all the name calling. I'll pop back in a bit
What do you mean ?
All the times I've watched his videos the contents section gets populated by people saying he ripped them off or didn't do something right. Seems like a nice enough fella to me but who didn't like a bit of comment section drama
who's that with you, and what part wanted editing out,
Nice to hear the np300 engine at last :)
My Son
Prob cos doing over 60 in a 40 lol and fuz sit in bus stop on entry slip
Thanks for that. I have one of these NP300s dual turbos
Hello, can you help me? Is there a sliding rear window for NAVARA 2018 NP300 in Germany, I can´t find any. Or does the window from Xclass fit in? Thank you
I've got a 09 D40 auto. No throttle pedal but turned it off and back on and it worked for a while. Garage got it and can't find any fault codes. Any ideas
Will that be the cause of lack of power in 3rd n 4th in an r51? As my cruise control wo t stay on, it struggles with power going up hill in 3rd and 4th. So would you say the neutral position sensor? Its a 55 plate Nissan Pathfinder r51.
I have a auto 2020 and kicks back the same in about 3rd and 4th gear will this have the same sensor as the manual?
Hi where would the sensor be on a automatic transmission thanks
Hello if a D23 light of emergency brake ( brake assist) on dashboard is on and the car does not goes more than 3500rpm is on safe mode?
It can be the sensor you show on video( neutral position) best regards, great videos
Thanks for the upload - good to know
Hi Sir Thank for This video!!! Sir need you help can you make one off this how to check the Neutral Position Switch Sensor is good or falut thank is it got obd2 code in system ?
Does this also happen in automatic navaras?
Hi there, aus np300 twin turbo auto. Jump in will drive fine through the gears, once it gets past 80kmph and you come back to a stop. When taking off it won’t boost until 2500rpm when it slingshots, throttle response non existent.
First occured on a very steep hill climb, oil low warning on dash, also note fuel tank was very low also.
No codes.
did u figure out the issue?
Hi there, my 2017 navara has recently lost power when trying to accelerate, it eventually gets up to speed but is really sluggish. Whats your thoughts?
Boost sensor
Why would the neutral position sensor cause the engine to cut out?
you tell me mate before i explain it in the next vid
Best guess is because if the car thinks it's in neutral it won't allow you to rev it past a few thousand rpm, hence it will cut back until the revs fall below the limit? Only a guess though..
@@Altair885 Thats the only thing I could think of but they'll rev all the way in neutral.
@@ATOM314159 after doing a bit of homework, it seems maybe the tip of the sensor plunger may wear a couple of mill, pushing the gearstick over to the left whilst driving in pain, will temporarily "fix" the vehicle.....
in neutraul its not under any load at all , in gear its underload , so ecu pumps more fuel and air etc underload , but with dodgy switch will confuse the ecu some times run drive fine dependant on how much of a load you want to put on it . but soon as you put excessive load it will try to shut down . all the best
Mine have hard start in the morning what the problem
Des i herd the Warden was very happy with your behaviour...
😂
Hi Des,
Firstly I want to say I really enjoy watching your videos, could I ask have you come across similar issues with the D40?
I've been having problems recently with the truck cutting out every now and then and lacking power when booting it up hill, I tend to just pull up and switch off and on again and it will be fine for a bit, I have watched one of your previous videos and I'm putting that down to the SCV? but I have also noticed my Cruise control has stopped working and after a bit of google-ing I've found people saying it could be the neutral position sensor in the gearbox.. I just wondered what your thoughts are?
2009 Navara D40 with 191.000 on the clock.
Cheers.
Chris Moon
SCV buddy you will have to change fuel filter and a fuel pump reset the other problem you have can be the squib in the steering wheel Hope this has helped buddy All the very best Des
@@westyorkshireengineservice9160 Cheers Des that's very helpful thanks.
I will get the SCV changed and i have done a fuel filter change a few times now so nice easy job, ill do that at the same time.
I did see something about the squib but others have said the airbag light would be on.. anyway not that bothered about cruise control for now I'd rather have her running right first, I just wondered if the two issues I have are connected that's all.
Thanks again mate.
Chris Moon not connected buddy
Good afternoon my friend here in the Philippines 🇵🇭..my issue with my Navara 4x4 is..as I'm driving at various speeds mostly 60km or faster my engine light turns on and I lose all power down to zero...this is ridiculous because the mechanics that I shared this with say that they need an engine light code to figure it out. But of course it never happens at the mechanic shop right ✅ so I was instructed by other Nissan truck drivers is to disconnect the battery for about 3 minutes to reset the computer and then reconnect the battery and it drives ok until the next time it feels like losing power...any suggestions?
Check fuel control valve - installed on the fuel pump with mega tester and free move of plunger, probably DENSO ( short or long, depends of pump model )
this happens to me almost every 120 to 150kms, I do the reset as you do. were you able to figure out the culprit? its 2 weeks already, and always happen at night that's why i can't bring it to casa. they want it to be at checked at the error condition for them to check the error. I was able to check it myself it was P012B at obd scanner, but i was not able to bring it to casa since im too far from them
👍👍👍👍
Had mine 12 months from new and it’s been in 8 times with DPF, adBlue and ECU problems.
same here , had mine for about a year, its done 100,000 km's. DPF signal keeps popping off, tried a forced re-gen, still giving me issues. you have any idea what it might be ?
Hlw
I didn’t learn anything
watch more videos and you will