Adjustable height workbench using my 18V DeWalt battery
ฝัง
- เผยแพร่เมื่อ 4 มิ.ย. 2024
- A bench that you can sit or stand by using simple electrics and motors.
Parts used in this build:
DC/DC converter 300w 20A : tinyurl.com/yx7j6dd7
2 Motors with mounts: tinyurl.com/2p8vzz6a
4 Linear rails: tinyurl.com/2e2453y5
3 way toggle switch: tinyurl.com/y6usvshy
Voltage read out: tinyurl.com/2z5z9mdb
On/off switch: tinyurl.com/2k8j7c6b
STL for the dewalt adapter: www.thingiverse.com/thing:272...
STL for complete battery compartment box : www.thingiverse.com/thing:531...
You can support me for free liking and subscribing to the channel or you
can buy me a beer 🤟www.paypal.com/paypalme/ogNoi...
Hope you enjoy it and please like and subscribe to help me over the 1000 subs 🤟
★ FOLLOW ME ★
/ noizieworks
/ noizieworks
/ noizieworks
Timeline:
0:00 intro
0:37 woodworking
6:31 3D printed mounts
7:18 testing the system
7:54 Components and assembly
11:33 final finishing and testing
12:27 The big 100kg test and final words
★ MUSIC ★
------------------------------
audiio.com/
------------------------------
FUJI by tubebackr / tubebackr
Creative Commons - Attribution-NoDerivs 3.0 Unported - CC BY-ND 3.0
Free Download / Stream: bit.ly/3ohSx0q
Music promoted by Audio Library • FUJI - tubebackr (No C...
------------------------------
#Workbench #diy
That's a great looking bench. Thanks for showing all the steps involved.
Thanks for watching!
This is just what I need. Thanks for the build!
Thanks for watching and good luck building it! Please tag me if you have insta, i would love to see it!
Pretty Cool!
Very cool!
Fascinating!! I would love to have a workbench like that but my skills are woodworking. I could build the bench but would be lost when it came to the electronics. I'm getting close to retirement and upgrading some of my shop equipment. I've been looking for plans for a workbench that could move around my shop and adjust height for different duties. Well done! Impressive!
Thank you!
It is awesome
Espectacular proyecto!!!, ¿podria indicar que medidas tienen los listones de madera utilizados?
Prachtig!
ok... ok.... ok... you got a new subscriber.
Great project and video! Did you find there is any racking or it's quite sturdy with lateral forces? Thinking of making one where I handplane on...
There is a small bit of racking on the width cause it doesn't have motors lifting it but it's not a problem. I'm thinking about doing a 1 year later vid so if you have any questions let me know.
Very nice !! Now you can make me a lift bridge for my car 😜😁
🤷♂️🤞
maybe add matchfit's 14 degree dovetail channel system for an awesome outfeed/work station?
Can you supply us with a cut list so we can build this awesome project?
I’m 6’3” tall but I have a heart problem so I need to sit a lot at my table but when I stand I’m stuck bending over at the table which is super uncomfortable after a while.
Thanks so very much for showing how you created this table.
Please contact me on facebook messenger so i don't forget(super busy right now) and i will do some measurments for you.
This is awesome! Do you sell building plans?
No i don't, not that good in making plans i'm more of a let's try this now of a woodworker.
I have added links to all the parts that i used in the description including the STL for the battery powered control box.
Wow, that’s an incredible design. Could you provide the names of the lift motors and components you used. I rechecked the video but didn’t hear the names. Thanks!
Added all the parts in the description! Thanks for watching :) stl for the electronics following later today(tip use tiewraps to keep 2 part from falling off) you need anything else let me know
@@NoizieWorks Thanks!
3- centimeters or yay high. 30 centimeters in inches is almost 12 inches. How high is yay high?😂
You will have to help me out brother, it's been a while i made that yay high or 3cm 😆 what would you like to know
Of course they don't tell where they get parts from
There is a reason why i don't include them and that's because the links get removed(expire) all the time on aliexpress and big site's like that. Half the time i get requests to update the links on videos i do provide them and that's just crazy so i don't bother. I call out the components by name and if you put that in google 90% of the time it's right there in front of you on you're favorite site. If that doesn't work you could kindly ask me to point you the right way with a link cause i do read the comments (not like other people) and don't mind helping you even if it's a good chat on messenger like i did for a few people in the past.
FIRST