Great build and such a simple design, there are many over complicated scissor lifts on TH-cam that don't do the job as well, love to see some more projects
Really like the build and appreciate sharing! Would just like to point out that there is quite a bit of unsafe practices shown.. I’m sure for you as a skilled and experienced woodworker it was easier to control the risks but newbies trying to follow your guidance who don’t know any better might end up with serious injuries. Perhaps consider putting a disclaimer or subtitles during more dangerous scenes so they get safety tips as well. Again, thanks for sharing!
Good looking and practical bench/ table to have in any shop as it could be adapted pretty easily to be a infeed or outfeed table , a material handling cart , or many other uses I’m between shops and homes at the moment but I’m pretty sure this is the way i wat to go in my next shop as Due to some injuries my back needs to have Something similar for me to stand working on something for long periods at a time i will probably power it with a modified angle grinder attached semi permanently to the Unit ( batter powered ) of course
I had flashbacks watching this....I built one like it with the drill hookup on the bottom.....and all I had was a drill and a skillsaw.....wish I would have filmed it
I've had the chance to use this table a couple of times now. It's fun to whip out in front of people:) I can see what people are talking about when they say the legs are delicate, but they're design to support a "mostly" vertical load, not be torqued from the side or pushed back into place. If you just let the table open or close on it's own and don't force anything, it works great th-cam.com/users/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh Once it's set up, it's pretty solid. My only gripe would probably be related to the clamps provided. They're not the highest quality. They do the job, so no big deal, but they could be better. All in all, pretty cool gadget.
Rather than ask you to do it, I'm removing the threaded bar and somewhat archaic drive system (lol) with a linear actuator that I've already bought. usly, thanks for this. I couldn't quite get my head around where I could mount the actuator to do what I've mentioned. I'm undecided whether top or bottom mounted (possibly middle with a longer scissor-chain). My Actuator extends from 30cm to around 60cm in just over a minute
Any idea how much it will hold or lift? I have a metal cabinet I will need to refinish and rehabilitate but I suspect is well over 100 pounds and I need to take it out work on it and then put it back and can’t leave it on the bench. Thinking I could use this to load it on and then bring it up the height to work and put it all away after each session.
I mean, amazing work obviously, but what is the point of moving up and down a few inches?? At least show it going all the way to the ground or way up, no?
Great build and such a simple design, there are many over complicated scissor lifts on TH-cam that don't do the job as well, love to see some more projects
Fantastic Thais project! Bealtiful !
Thanks... This really help for my project..
Really like the build and appreciate sharing! Would just like to point out that there is quite a bit of unsafe practices shown.. I’m sure for you as a skilled and experienced woodworker it was easier to control the risks but newbies trying to follow your guidance who don’t know any better might end up with serious injuries. Perhaps consider putting a disclaimer or subtitles during more dangerous scenes so they get safety tips as well. Again, thanks for sharing!
Thanks for sharing.
an eye opener
Good looking and practical bench/ table to have in any shop as it could be adapted pretty easily to be a infeed or outfeed table , a material handling cart , or many other uses I’m between shops and homes at the moment but I’m pretty sure this is the way i wat to go in my next shop as Due to some injuries my back needs to have Something similar for me to stand working on something for long periods at a time i will probably power it with a modified angle grinder attached semi permanently to the Unit ( batter powered ) of course
I had flashbacks watching this....I built one like it with the drill hookup on the bottom.....and all I had was a drill and a skillsaw.....wish I would have filmed it
I've had the chance to use this table a couple of times now. It's fun to whip out in front of people:) I can see what people are talking about when they say the legs are delicate, but they're design to support a "mostly" vertical load, not be torqued from the side or pushed back into place. If you just let the table open or close on it's own and don't force anything, it works great th-cam.com/users/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh Once it's set up, it's pretty solid. My only gripe would probably be related to the clamps provided. They're not the highest quality. They do the job, so no big deal, but they could be better. All in all, pretty cool gadget.
fantastic! having difficulty finding acme screw flanges, can you provide web resource where you got them? great build!
This ideal for the out feed table /work bench I have plans to make, do you have plans yet
Awesome lift table.
This is awesome! Do you have plans?
Love the Fish Eye Lens on your camera. I might have to start wearing Fish Eyed Glasses to help make my MY Boards look Straighter.
Hola Jimkrum, es admirable tu trabajo, felicitaciones, por favor podrias proporcionar las medidas del mueble?.....gracias
thank you^^~^*
12:41 - you can hide it with your thumb, but we still saw it :-)
A brace on the bottom frame would be a great idea.
nice work
Rather than ask you to do it, I'm removing the threaded bar and somewhat archaic drive system (lol) with a linear actuator that I've already bought.
usly, thanks for this. I couldn't quite get my head around where I could mount the actuator to do what I've mentioned. I'm undecided whether top or bottom mounted (possibly middle with a longer scissor-chain). My Actuator extends from 30cm to around 60cm in just over a minute
*Seriously!
Show! Top!
Very nice build. Works great. How much weight does it hold?
Great design. Do you have plans ready for it? I want a set of plans. How much weight can it hold?
What is the drilling machine? Is it a shop smith? I am new to wood working. I just like the action of it.
any idea how much weight it can support?
Any idea how much it will hold or lift? I have a metal cabinet I will need to refinish and rehabilitate but I suspect is well over 100 pounds and I need to take it out work on it and then put it back and can’t leave it on the bench. Thinking I could use this to load it on and then bring it up the height to work and put it all away after each session.
I would love to know what table saw sled is that. Wonder if itll maneuver to RIP a 4x8 longways.
Pretty cool design. Just wish it was more on the beginners level instructions. Lol.
Wery Good
Your table saw is awesome, it runs so smoothly, what is it?
i think thats the 480v 8hp model they sell at home depot. :)
Please, how can I get the plans?
I'm thinking of doing something similar, how heavy is the whole thing?
Are there plans I can buy?
Nice project. Didn't like the video. Some explanation and some sound would have been nice.
ahoj
I mean, amazing work obviously, but what is the point of moving up and down a few inches?? At least show it going all the way to the ground or way up, no?
Should add some music to the video
At lot of westing time and resourses