Phantom Paper Jam - Fix Epson Printer Paper Loaded Halfway then Fake Jam
ฝัง
- เผยแพร่เมื่อ 7 มิ.ย. 2022
- Phantom of the Paper Jam? How to solve a constant fake paper jam for the Epson printer? The printer will feed a half-page of paper and then complain about a paper feed problem. We checked the remaining paper, and paper eject sensor (PE Sensor). Eventually, we found the problem is a broken page feed gear (PF Gear) which caused a duplexer jam. We used a WF-4730 printer but the problem may exist in other printers.
Link to Part 1: • Phantom Paper Jam - Fi...
00:40 Check the EJ sensor
01:46 The problem
02:30 Checking the duplexer
03:20 The broken PF Gear
04:16 Replacement Parts
05:13 Link to uncasing
05:56 Disassemble the top of the printer
07:00 Remove the Mainboard
09:00 Replace the PF Gear
Related topics:
Constant paper jam, Epson paper jam, fake paper jam error on Epson, Epson paper jam fix - แนวปฏิบัติและการใช้ชีวิต
Thank you Soo much, it helped me cause I was looking what happened in my wf7610 for a week!
Do you know where the paper sensor is on an et8550?
I have Epson WF-7715, problem I am having is it when I print a page it prints that page fine but after that it keeps pulling in pages and throwing them out until it empties the whole paper tray. Don't know what is causing this problem. If there are any papers in the tray and I switch it off it pulls the paper and leave it in the middle then it gets switched OFF. Any help will be highly appreciated.
I have something unusual,when i print from drawer 2 witch is A3 is ok,when i print A4 from top,ok again,if i try to print from tray 1 witch is A4 then pulling 2 sheets of paper blank then paper jam appear..
what should i do, my paper feeder is not spinning then it complains that it is out of paper, on the epson PX-1600F
Thanks 😊
Welcome 😊
hello my friend, in my Epson L3150 model printer, although there is no foreign object in the paper path and the part where the print head moves, it gives a continuous paper jam error. The paper comes half way, after a few lines of writing, the head stops and gives a paper jam error. When I move the small wheel under the paper part by hand, it turns hard. Is this normal? Which parts should I check? I will be very happy if you help
My epson et2720 pulls paper either half way in or almost halfway out and then says rear feeder paper jam. It's sitting halfway inside and halfway out front. What can cause the problem? I opened the printer but don't see anything wrong. Can I send you the video somehow to post and help me and others?
Hi I have a epson wf-7210 convert to sublimation and I use siser easy subli paper evrething was ok after come error jam paper the printer make stop and come half paper out only half front of head print
I am having an issue with my Epson ET-8550. It is practically brand new. I took out the rollers using it to print DTF transfers. It is giving me a paper jam error. It reads regular paper fine and I have even placed blue painters tape behind it thinking it was due to thinness of DTF sheets. I've tried numerous cleanings and numerous DTF transfer sheets. It was working fine until it stopped reading one day. It's only a few months old.
Is there a sensor somewhere that is possibly unclean? My rollers are also clean and my gear on the right side of the roller is lined up as it should be.
Please help
Thanks for subscribing! Yes, there are a couple of sensors and they work together. You need to get the timing right, and also the paper roller clean, so it can grab the paper. When it grabs it, it will move back and forth for sensor to detect it. I think your roller worn out or dusted with the powder from DTF film, so it's too slick.
This keeps happening on my L805 i need help