In Greece everything is in last minute buahahahahah… so glad to be on this video Serge and a public what’s up to all the Final Cut Pro buddies :) stay creative everyone happy summer!
These are supremely helpful tips! Will definitely clean up my timelines and speed up my workflow significantly, especially with Steve’s positioning and Matt’s audio trimming tutorials. Thanks so much to everyone for sharing these.
Great to be included in this video, Serge! Love helping other Final Cut Pro editors and content creators level up their editing with some essential tips & tricks. I even learned a new one from Dylan John with that hold frame transition trick - that was great! 🔪🥦🧲🎞
@@Serge1913 I had a feeling most of us would forget to give you some leeway on the beginning and end of our segments! I remembered to for the end but not the beginning! 😬 Oops!
Elaborating on Matthew's tip, I have my keyboard shortcut for "trim to playhead" set to S on the keyboard. I do *a lot* of A roll editing for clients and this single press saves me so much time. Obviously option + bracket is fast compared to blading twice and deleting. But when you're editing 40 minutes of footage (for example), that is hundreds of key presses saved. I'm actually surprised so many people still use the default key binds, they're not optimised for particular workflows.
Off the back of Matthew’s tip, I use an MX Master 3 mouse and set up the main gesture button to be “blade all”, then the two physical macro buttons to “trim start” and “trim end”. I can whip through a first pass of an edit unbelievably fast with this
Just chiming in on Rafs great tip: You can also use shift-backspace do delete too gap clip, if you only have a regular keyboard like me, without a dedicated ‘delete’ key.
Loved it so much. Another great tip that saved me so much time while editing interviews was using in and out points and just hitting delete on sections of the a roll on the timeline that I didn't need.
awesome video -great content and i learned a lot while getting introduced to other YT FCP tutorial providers- I'm just learning and this video has broadened my scope of focus and developing skill sets thnx so much
When I use smart conform in FCP it does not adjust the videos. It says it can not use smart conform on cropped videos. When I un-crop my original videos and try again, it still doesn't work. It keeps the old video aspect ratio and places it in the centre of the new vertical frame, like a tiny box. Any advice? Thanks for the video.
Wow ... I was not expecting that. I'd love to see the email you sent out inviting everyone to contribute - did you have dirt on everyone? Just kidding - really great video.
One more hack from a hack. (That have used CAD for 20 years and love custom keyboard shortcuts. Of you need to do a command more than twice a day, you should have shortcut for it! 😅) What makes my editing super super fast is to add custom shortcuts to blade, trim start and trim end commands. I have them in side by side on keys Q W E. W is blade and trims are on both sides. You can imagine how fast they’re to use. ⚡️⚡️⚡️ Just cutting and trimming without really need to think about it or move hands at all. Cheers.
🤯 holy smokes! Man you brought together a powerhouse of a group (including yourself) to share some awesome tips. All of you guys are my go to for tips and tricks. I've still got a long way to go, but you guys are a huge help. Thanks Serge for putting this video together, and everyone that participated. 🤘🏻
Anyone that’s ever watched any of your videos would disagree. You may not admit it, but you’re an amazing content creator and editor. Thanks for helping out with this one!
i really like Serge but suggesting that ALL these Dudes are EXPERTS is a bit of a STRETCH. ok, Vdeo editig isn't Rocket Surgery so the 10,000 Hours required to become an Expert (MalcomGladwell) is most Likely on the High Side. I would try to avoid the BroteLL as its derivative-rehashed . . . I wish there were more original FCP Content out there.
It was much fun to be a part of this Serge!!! Thanks for putting this all together!!! 👍
Thanks for being a part of this Chris!
Thanks so much Serge for having all of us! This video has so many insane tips. Really wish I had this video 5 years ago 😂
Pure Final Cut Pro GOLD! Thanks for being a part of it Dylan!
Honored to be among some really amazing creators! Thanks for inviting me to have a part in it, Serge 🙏🏼
Your tip couldn't have come at a better time. Had to use the old hold frame trick for almost every segment in this one
@@Serge1913 So awesome to hear, brotha! I figured it might with a video like this.
Wow! So many good tips in here! So stoked to have been a part of this group of legends. Thanks Serge! 😄👊🏼
In Greece everything is in last minute buahahahahah… so glad to be on this video Serge and a public what’s up to all the Final Cut Pro buddies :) stay creative everyone happy summer!
Have a great summer Emilio! And thanks for being a part of this!
Thank you my friend!! Until the day we meet in person
This was super helpful Serge. Love all these editors! Thanks for sharing these tips!
Thanks for tuning in. Hope you learned something new!
Great stuff here -- thanks! Biggest thanks to Dylan John for the AWESOME Hold Frame Transition idea! Brilliant!
These are supremely helpful tips! Will definitely clean up my timelines and speed up my workflow significantly, especially with Steve’s positioning and Matt’s audio trimming tutorials. Thanks so much to everyone for sharing these.
Thanks, Serge, and the entire team!
Can’t believe I hadn’t seen your channel b4. Great tips, no filler, direct instructions. Thank you. New subscriber.
These are gold! Thanks Serge!
They really are, aren’t they. Thanks again for being a part of this!
Should’ve got Stream Deck Mobile to sponsor this video 😂
I think Chris and Matthew sold me on buying one!
Awesome video and thanks to all of these amazing people!
this also shows a great way to collaborate.
Immediate Save! Thanks Serge! killing to bro!!
So cool to have all these talented guys giving us game changing tips! Thank you Serge!
Great staff thank you so much. Keep it up
Big thanks to all the experts here who took place that was really helpful!
What a great team to learn from...thanks Serge this is gold !
Really useful. Thanks a lot, Serge for this video. Cheers from Italy
Game changer! Thanks Serge! Dylan’s tip was awesome!
Please continue this video part 2 ,3 and more more ,more 🙏🙏🙏🙏
It's an awesome session; you gave us everything we needed.
Great to be included in this video, Serge! Love helping other Final Cut Pro editors and content creators level up their editing with some essential tips & tricks. I even learned a new one from Dylan John with that hold frame transition trick - that was great! 🔪🥦🧲🎞
That was perfect timing for that tip from Dylan John! I had to use it for almost every segment in this video!
@@Serge1913 I had a feeling most of us would forget to give you some leeway on the beginning and end of our segments! I remembered to for the end but not the beginning! 😬 Oops!
Stoked that I could teach you fellas something new 🤙🏼
Elaborating on Matthew's tip, I have my keyboard shortcut for "trim to playhead" set to S on the keyboard. I do *a lot* of A roll editing for clients and this single press saves me so much time. Obviously option + bracket is fast compared to blading twice and deleting. But when you're editing 40 minutes of footage (for example), that is hundreds of key presses saved. I'm actually surprised so many people still use the default key binds, they're not optimised for particular workflows.
Great idea of getting other youtubers on and sharing ideas.
Thank you! Turned out way better than what I could have done myself!
I love the way you did this. So dope and informative
Incredible video, gentlemen! Extremely helpful… I’ve subbed to all your channels. Thanks, Serge, for putting this together.
Off the back of Matthew’s tip, I use an MX Master 3 mouse and set up the main gesture button to be “blade all”, then the two physical macro buttons to “trim start” and “trim end”. I can whip through a first pass of an edit unbelievably fast with this
Thanks Serge!
This was amazing, love all the different tips.
I use 4 of the 9 tips in this video every day and the rest 5 tips are very good to learn, Thank you Serge, and all the creators.😘
loved it. This was extremely helpful
Thank you for all these tips in one place! theyre all great and cant wait to use em all!
Just chiming in on Rafs great tip: You can also use shift-backspace do delete too gap clip, if you only have a regular keyboard like me, without a dedicated ‘delete’ key.
thanks for this tutorial!! great stuff!!
Loved it so much. Another great tip that saved me so much time while editing interviews was using in and out points and just hitting delete on sections of the a roll on the timeline that I didn't need.
Awsome selection!!
Awesome video! Every tip was really useful! Thanks
Awesome stuff in here! Also love the little captions you put at all of the introductions 😂
Thank you for sharing one of the best video tips for Final Cut. 😊 It's greatly appreciated! 👍
Killer video here Serge. Thank you good sir!
awesome video -great content and i learned a lot while getting introduced to other YT FCP tutorial providers- I'm just learning and this video has broadened my scope of focus and developing skill sets
thnx so much
Helpful buddy 👍
Awesome stuff as always, thanks Serge!
When I use smart conform in FCP it does not adjust the videos. It says it can not use smart conform on cropped videos. When I un-crop my original videos and try again, it still doesn't work. It keeps the old video aspect ratio and places it in the centre of the new vertical frame, like a tiny box. Any advice? Thanks for the video.
Awesome tips! Thanks as always
I really want to congratulate YOU, and all the guys that participated! Love the cooperation Well done Sir...
Fantastic Serge. I'm serging with skills now.
Brad West’s tip was what I was dealing with today. Thank you
your so good at this dude, appreciate you
really helpful guys, thanks!
Thanks!!!
This is an awesome video! Great tips.
what a great idea ! hope we gonna see this very often .
these videos are so therapeutic to me 🙂!
So great .. thank you guys
This stuff is awesome! Keep it up Serge :)
Really helpful. Thanks for sharing :)
This was amazing
Thanks
Wow ... I was not expecting that. I'd love to see the email you sent out inviting everyone to contribute - did you have dirt on everyone? Just kidding - really great video.
Whaooooooo ! Thanks Serge 👍👌
Great content!
Well done guys...
Wow - That tip showing how to destroy the magnetic timeline with no possibility of ever seeing it again was a gamechanger. 😉
One more hack from a hack. (That have used CAD for 20 years and love custom keyboard shortcuts. Of you need to do a command more than twice a day, you should have shortcut for it! 😅)
What makes my editing super super fast is to add custom shortcuts to blade, trim start and trim end commands. I have them in side by side on keys Q W E.
W is blade and trims are on both sides.
You can imagine how fast they’re to use. ⚡️⚡️⚡️
Just cutting and trimming without really need to think about it or move hands at all.
Cheers.
i really love the tips!
AMAZING!
Ok Serge. I'll forgive you for not reaching out to me just because all these tips are 🔥 (that first audio cathedral tip, DAM)
Thanks Jeff. Would love to have you in one of my videos. Let’s make it happen!
Brilliant!
one of the best things happen here
Ace Video Serge every one a gem. Thanks so much👍🚀🚀🚀
Glad you like them!
Great tips, could you please show us how to edit a reaction video for TikTok in Final Cut Pro?
incredible
Has anyone ever figured out how to PASTE a sound effect with the Stream Deck?
Amazing and very useful 😍👌🏻and hopefully you add a timestamp so we can get back to each tip quickly 👌🏻😍🔥
I will add time stamps as soon as I get a chance to. Thanks for the advice
FCB thanks sir , and serge u too
THE BEST! 👍
🤯 holy smokes! Man you brought together a powerhouse of a group (including yourself) to share some awesome tips. All of you guys are my go to for tips and tricks. I've still got a long way to go, but you guys are a huge help. Thanks Serge for putting this video together, and everyone that participated. 🤘🏻
I’m still a hack and still stoked I could help:)
Anyone that’s ever watched any of your videos would disagree. You may not admit it, but you’re an amazing content creator and editor. Thanks for helping out with this one!
@@Serge1913 That's incredibly kind of you man. I'll help anytime you ask.
I would like to see more FREE PLUGINS FOR 2024 😊
😢😮😢😮
"Promo sm" 😠
i really like Serge but suggesting that ALL these Dudes are EXPERTS is a bit of a STRETCH. ok, Vdeo editig isn't Rocket Surgery so the 10,000 Hours required to become an Expert (MalcomGladwell) is most Likely on the High Side. I would try to avoid the BroteLL as its derivative-rehashed . . . I wish there were more original FCP Content out there.