Check out Scale Motorsport here: scalemotorsport.com/?ref=ModelCarMuse If you choose to purchase from this affiliate link we may receive a small commission at no cost to you. Use code MODELCARMUSE to receive a discount on your purchase!
Very helpful video -- great technique, presented so clearly. Thanks! I bought some of the fine saws from Scale Motor Sport, but was extremely disappointed having to pay $9 for shipping something so tiny.
Scale Motorsport has BEAUTIFUL products that are of the highest quality and easy to use…it’s great to see that they sponsored an episode of the best model car channel on TH-cam!
I recently discovered your channel, and after 25+ years of building car models, you are teaching me things I should have known from the beginning. Thank you!
That is awesome! Ive made similar type hinges back in the day, but not as nice as yours! I need to get back into my modeling hobby. . . .hopefully here one day soon! Its been far to long! Thanks for sharing & happy modeling😃👍🏻!
A4 garage has made accurate hood hinges just like the real thing ! Someone should make and sell those! Would be the next best thing in our great hobby! No more hoods laying next to models at shows! I prefer to display my builds closed ! U don’t see cars parked with the hood laying next to a car ! Or propped up with toothpicks. Cool tutorial Doug ! Another great video! 😎✌️🤔🫡🇺🇸🇺🇸
Obviously, you're a disciplined and thoughtful guy. I can't thank you enough for not only the specific content but also the fact that you actually Speak! I find the music video model guys an absolute waste of time. Sometimes phrase, "a picture says a thousand words " is not true. Your dialog is well prepared and succinct, and you get more information out there in a few sentences than other people do in a careers worth of "just watch how talented I am" videos. Are you a school teacher? An example of what I'm talking about is when you warn viewers about the placement of the hinge pivot point either interfering with the parcel shelf or the rear glass. That is sage advice. I run into poor planning issues like that all the time. My execution is pretty good with 54 years of building under my belt, but I'll be damned if I can get an F1 cowling to fit over all my "plumbing". Thank you, Grazia, danka
Glad you're enjoying the channel. I'm not a school teacher, but I do mentor a FIRST FRC robotics team for high school age students, which has taught me a lot!
I have the patience to do that kind of work but had never seen how it was done. Thank you for posting. I'm retired and getting back into the hobby. I used to build models when i was in high school.
Great video! I have been watching other videos on the subject and, by far, yours is the best. If someday I decide to open doors or trunk, I will come back to your video and I will not have trouble to make it work. Thank you for this video!
Ive been following your work since the late 80's early 90's. I use your plastic welding technique all the time & now this. Thank you Professor of Plastics.
I got little tidbit for you. I just thought of it this AM. If you want to say add some LED lighting to a project but don't have a lot of room for wires, dollhouse hobbyist use flat copper strips on interior rooms to add power for lights and things. The copper is mounted to tape that can be applied to the walls inside the structure. It comes in rolls. Just a thought for you.
Hi MODELS CAR MUSE, good nigth great video about the details in the axel of the doors, lm fan of the modelism, thanks of share your experience in the world of the miniature and Tips for made best jobs,,, greetings and congrautlations, your friend Oscar de Playa del Carmen Q R México.
Wow! Techniques such as this has given me a new excitement for the hobby. Plus I've been looking for saw blades and scribers like these for years. Thank you!
Three is just right; every drill press has its own personality! My grandfather purchased this Walker-Turner, new, in the late 1930s. He replaced the motor in the '70s. "Ball bearing equipped" and still running strong.
Very nice technique. There is definitely no alignment problems with this method. I may have to try this one. Scale Motorsports has some very good stuff. I’ve used both of those blades for years, and they are great. Thanks for sharing.
Thank you so much for this brilliant video: 👌👏👍! I love building motors into my slot cars, though they very often do not come with hinges. Now - thanks to you - I do know how to try.
That's a badass tutorial. Thanks for sharing that! That said, I might need to get another Ford GTLM body as I'm opening both doors, and could be in over my head there! LOL Matthew also has some fantastic PE parts. After seeing how well his scriber & saw blades work, I'll be getting some also.
Me encanto la técnica que lograste con el baúl del auto. soy de Argentina y me encanto esa forma no te volees loco para que después este en linea el baúl.
Doug, I love what you've been doing, this is the same type of mentoring that many of us got from the seasoned modelers when we were just beginning. I got a lot of mentoring as well as needed constructive criticism from my Uncle who had been building for years by the time I came along.
Absolutely love what you do. Sit in amazement and watch always. I wish that when instruction like this is given possibly you could link us to the size of rod and tubing that you use? The amateur like me will go to the store and look at a "hundred" different packages for the tubing, and the same for the rod. If you would have linked that in your store I would have bought it immediately. Thank you at least for showing us your technique. Greatly appreciated.
Thank you, glad you enjoy the channel! There is now a link in the description to the brass used in the video. For reference, I used rod and tube from K&S Precision Metals. The tube was "round brass tube number 8125" 1.57mm (OD). The rod was "brass rod number 8160" 0.81mm. But, use whatever sizes work for your particular model.
@@ModelCarMuse you are so gracious in your response and this addition. Thank you. Also bought the toolnset and scribing extra blades today. I appreciate you for those too. Know that I'll continue watching with both learning and wonder on all your projects.
What about the door sill plates ?? I've been searching for a long time for a video or a chat or a magazine article or anything about making scale sill plates....😢
What size tube and rod do you use? I’ve always been hesitant to cut out doors because of the alignment issue, can’t believe I never thought of this method, thanks
I used rod and tube from K&S Precision Metals. The tube was "round brass tube number 8125" 1.57mm (OD). The rod was "brass rod number 8160" 0.81mm. But, use whatever sizes work for your particular model.
Thanks for the video Doug! Beautiful work and video! I've always been pretty intimidated and somewhat uninterested in opening panels until now! Thanks for sharing!
Thanks for this video! I am trying to learn. 8:12 - Should I also grind the edge of the trunk lid, to make it look thinner, for the sake of appearance? Can you recommend a video that shows the process of fitting the body glass and the interior tub with the trunk hinges? Thank you for your patience!
Every build is a new learning experience! Once the trunk lid is loose you can fine tune the thickness from the underside. Yes, the front edge should be thin to be true to scale. I don’t know of a video off-hand, but once the hinge is positioned and attached, you may need to make some adjustments depending on the specific car. The lower edge of the glass may need to be trimmed; be careful because the clear plastic can be very brittle and crack easily. The interior tub may need to be modified, but it shouldn’t change the overall look from the outside of the car.
Seems so obvious to set up your hinges while the doors etc are still attached to the model! I'm going to be sure to implement this technique in my future builds!! Also digging those saw blades too! I'll have to pick some up. Looks like the "thinner" saw blade would be good for going around corners and the wider ones, better for straight lines.
Great tutorial! I am still in the process of analyzing the best way to make the hinges, but I still haven't dared to make them on my own. I think your video will help me to just go for it! :) Thanks!
Great video and have never done it, maybe now I will try it. Have you ever done a tilt front end conversion to a kit ? There are kits that the kit maker has done it for us but how to if not. I do realize that it is not practical for most cars, ie '59 Cadillac, LoL. Cheers
Doug Whyte, watched, rewatched this presentation. Bravo! Great technique, especially the preplanning taking advantage of the one piece body molding to assure panel alignment after separation. Thank you. ?: couldn't help not noticing the drill press. I'm in the market to purchase. Your's...brand? Pro's/con's. At your convenience. Respectfully, jg
That's a Walker-Turner drill press from the 1930s. My grandfather bought it new. They ceased production in 1957. You can find these for sale, used, but I would recommend looking into a newer model.
Hey Doug great video tutorial I have one question…well actually 2 questions. What size is the brass tube you’re using and what size is the rod that slides into the tube? Keep them vids coming us modellers really do appreciate them!! Thanks Doug!!
Glad you liked the video! The sizes I used are listed in the description under the video and there is an affiliate link to Amazon. Your needs may require a different size.
Great video! I’m building the 1/16 scale 1939 Jaguar SS 100 by MiniCraft. The doors are already separate from the body and I want to hinge them… they open from the back. Can you do a video on doors hinges? I’m guessing it’s probably similar to the trunk lid. I like your channel, I’ve learned a lot, I’m a subscriber, thanks.
Thank you, glad you enjoy the channel! There is an affiliate link in the description under the video. I used rod and tube from K&S Precision Metals. The tube was "round brass tube number 8125" 1.57mm (OD). The rod was "brass rod number 8160" 0.81mm. But, use whatever sizes work for your particular model.
Check out Scale Motorsport here: scalemotorsport.com/?ref=ModelCarMuse
If you choose to purchase from this affiliate link we may receive a small commission at no cost to you.
Use code MODELCARMUSE to receive a discount on your purchase!
Very helpful video -- great technique, presented so clearly. Thanks! I bought some of the fine saws from Scale Motor Sport, but was extremely disappointed having to pay $9 for shipping something so tiny.
Scale Motorsport has BEAUTIFUL products that are of the highest quality and easy to use…it’s great to see that they sponsored an episode of the best model car channel on TH-cam!
Thank you, Frank!
Ok, i was just schooled in everything I do wrong! Thank you so much for the tips and tricks!!
Hi Brian! Glad to help.
I recently discovered your channel, and after 25+ years of building car models, you are teaching me things I should have known from the beginning. Thank you!
I have just now discovered the channel and it makes me even more want to start model making
Great "How To" video! Twenty years of questions were just answered in fifteen minutes. Thank You!
What a great comment, thank you!
I stopped opening doors but this clever method makes me want to start again. A simple idea that seems obvious now.
Go for it, Dave!
That is awesome! Ive made similar type hinges back in the day, but not as nice as yours! I need to get back into my modeling hobby. . . .hopefully here one day soon! Its been far to long! Thanks for sharing & happy modeling😃👍🏻!
A4 garage has made accurate hood hinges just like the real thing ! Someone should make and sell those! Would be the next best thing in our great hobby! No more hoods laying next to models at shows! I prefer to display my builds closed ! U don’t see cars parked with the hood laying next to a car ! Or propped up with toothpicks. Cool tutorial Doug ! Another great video! 😎✌️🤔🫡🇺🇸🇺🇸
Hinges made from tinplate, his work is amazing. Doug is superb also, two great, inspiring builders.
A4 is on another level.
@@jslute yep him and Juha Ario 🫡😎✌️🇺🇸
@kevinsmith7697 I will definitely look it up.Mokei Paint is pretty cool too,Thanks for the tip!👏🇨🇦
Obviously, you're a disciplined and thoughtful guy.
I can't thank you enough for not only the specific content but also the fact that you actually Speak! I find the music video model guys an absolute waste of time. Sometimes phrase, "a picture says a thousand words " is not true. Your dialog is well prepared and succinct, and you get more information out there in a few sentences than other people do in a careers worth of "just watch how talented I am" videos. Are you a school teacher?
An example of what I'm talking about is when you warn viewers about the placement of the hinge pivot point either interfering with the parcel shelf or the rear glass. That is sage advice. I run into poor planning issues like that all the time. My execution is pretty good with 54 years of building under my belt, but I'll be damned if I can get an F1 cowling to fit over all my "plumbing". Thank you, Grazia, danka
Glad you're enjoying the channel. I'm not a school teacher, but I do mentor a FIRST FRC robotics team for high school age students, which has taught me a lot!
ANOTHER Great Video…!!👍👍
Ordered Saw & Scriber Blades As Well As A Handle For Each…💪
Thanks For Sharing…🙏
Bill Geary does nice opening doors also
I have the patience to do that kind of work but had never seen how it was done. Thank you for posting. I'm retired and getting back into the hobby. I used to build models when i was in high school.
Now that's was really helpful thank you vary much vary well done tutorial enjoyed.
Nice video Doug..... 👍👍
Thank you for making this
Great video Doug 👍
really dou only 500 likes you are scale modeling brought to life i got soo many ideas its almost silly😁😅🤣🤩thanks to you my friend 🤓scooter d😎
Thank you for taking the time to show this technique!
Great tutorial Doug, Thanks!
Thanks for sharing your knowledge! great movie
Wooo! Thanks 4 the tip
Great Thank you for the tutorial 👍
Great tutorial Doug. This came out just in time to do the hinges on the '67 Mustang fastback I'm building.
Excellent video sir! Thank you for the lesson, much appreciated!
Doug, great video!! This is how i will be creating my moving parts!! Thanks for the tips, much appreciated!!
Great video! I have been watching other videos on the subject and, by far, yours is the best. If someday I decide to open doors or trunk, I will come back to your video and I will not have trouble to make it work. Thank you for this video!
Great tutorial video! Gonna have to try this on next car project :D
Lots of good tips !
Wow I struggled with this I'll have to try it thank you sir!!
Great tutorial 👌👌👌👌
Ive been following your work since the late 80's early 90's. I use your plastic welding technique all the time & now this. Thank you Professor of Plastics.
Merci beaucoup mon frère 🤗😘
Thanks for sharing this technique. I used it today on my 2025 USACC Dart build. 😎👍🏾
Another benefit of brass is it's so easy to soft solder and plate. You can really make some scale hinges with solder and a bit of nickel.
I just found this and I subscribed!very nice video. I love your techniques
That was a great tutorial! Thanks for sharing.
Interesting way of doing that. Well done!
Hi Tim! It's all about the workflow. Thanks!
I got little tidbit for you. I just thought of it this AM. If you want to say add some LED lighting to a project but don't have a lot of room for wires, dollhouse hobbyist use flat copper strips on interior rooms to add power for lights and things. The copper is mounted to tape that can be applied to the walls inside the structure. It comes in rolls. Just a thought for you.
Thanks for the tip! It's always useful to look at the techniques used in other hobbies.
Well done!
Great tutorial, thanks. You just cost me money as I had to order those photo etch scribes 😊
Glad I could help!
Cool
That's Straight-Up C😎😎 LLL Doug 🏆🏆 Thanks For Sharing Your Experience and The SMS Deal👍👍 GBA 🤗 Gary.
Hi MODELS CAR MUSE, good nigth great video about the details in the axel of the doors, lm fan of the modelism, thanks of share your experience in the world of the miniature and Tips for made best jobs,,, greetings and congrautlations, your friend Oscar de Playa del Carmen Q R México.
Thanks, Oscar, and welcome!
Wow! Techniques such as this has given me a new excitement for the hobby. Plus I've been looking for saw blades and scribers like these for years. Thank you!
Am I the only one checking that drill press out? what a beauty! I'd love to have that in my mini machine shop. Is three drill presses to much?
Three is just right; every drill press has its own personality! My grandfather purchased this Walker-Turner, new, in the late 1930s. He replaced the motor in the '70s. "Ball bearing equipped" and still running strong.
I wish I had known this technique a few years ago! Thanks for sharing!
Very nice job, and thanks for sharing.
Very nice technique. There is definitely no alignment problems with this method. I may have to try this one. Scale Motorsports has some very good stuff. I’ve used both of those blades for years, and they are great. Thanks for sharing.
Nice detail 👍☕️☕️
Excellent tutorial, professional easy to follow instructions. Thank you so much! 😎
Liked and subscribed👍🏻 thanks for sharing!
Doing hinges for my first time and this video was very helpful. Thanks Doug! 🐌✌️
Glad to help, hope the hinges come out just the way you want!
goods vid on the channel thanks lee
Thank you so much for this brilliant video: 👌👏👍! I love building motors into my slot cars, though they very often do not come with hinges. Now - thanks to you - I do know how to try.
So very cool!!! Plus I was blown away by the rare kits I was able to see in the background
I'd love a video on your kit stash ❤
Great ideas, great video...
Thank you for making a video to show and explain how your technique.
Great job!!! Doug.
That was excellent.
That's a badass tutorial. Thanks for sharing that!
That said, I might need to get another Ford GTLM body as I'm opening both doors, and could be in over my head there! LOL
Matthew also has some fantastic PE parts. After seeing how well his scriber & saw blades work, I'll be getting some also.
Great tutorial Doug, with an easy finish.. I will be checking out the small saw type blades..
now this is a great tutorial! I recently bought these blades at a recent show and they work great. Nice and thin cuts. thank you and take care
Great video! I will be trying this method!
This was a Great video!!! Thanks for sharing!!!!
Excellent vid Doug!! Best video on this topic out there, thanks!! I'm sold on Scale Motorsports blades as well! Lots of great stuff!!
Awesome video Doug........I've had several questions about hinges and you just answered all of them. Thank you for sharing your knowledge.
Great video Doug lot of useful information never thought of that.
Thank you for sharing this method, very very useful!
Very interesting video and procedures. Thanks for sharing 👍🏼👍🏼
Nice job Doug!
Thank you! 💯👍
Me encanto la técnica que lograste con el baúl del auto. soy de Argentina y me encanto esa forma no te volees loco para que después este en linea el baúl.
When you opened the trunk lid it was like magic
Doug, I love what you've been doing, this is the same type of mentoring that many of us got from the seasoned modelers when we were just beginning. I got a lot of mentoring as well as needed constructive criticism from my Uncle who had been building for years by the time I came along.
Great video. Thank you for sharing your tips and tricks.
Extremely informative and good video. Love this! Thank you for sharing your techniques! Will absolutly try this!
Thank you for that tutorial, very interesting!
Absolutely love what you do. Sit in amazement and watch always. I wish that when instruction like this is given possibly you could link us to the size of rod and tubing that you use? The amateur like me will go to the store and look at a "hundred" different packages for the tubing, and the same for the rod. If you would have linked that in your store I would have bought it immediately. Thank you at least for showing us your technique. Greatly appreciated.
Thank you, glad you enjoy the channel! There is now a link in the description to the brass used in the video. For reference, I used rod and tube from K&S Precision Metals. The tube was "round brass tube number 8125" 1.57mm (OD). The rod was "brass rod number 8160" 0.81mm. But, use whatever sizes work for your particular model.
@@ModelCarMuse you are so gracious in your response and this addition. Thank you. Also bought the toolnset and scribing extra blades today. I appreciate you for those too. Know that I'll continue watching with both learning and wonder on all your projects.
Thanks for the helpful "how to" video! I have done a couple trunks, but have been hesitant to do any doors. This may get me to try them!
What about the door sill plates ?? I've been searching for a long time for a video or a chat or a magazine article or anything about making scale sill plates....😢
I agree, I have not found ready solutions for sill plates and have not yet tried to make my own. A good candidate for photo etch?
What size tube and rod do you use? I’ve always been hesitant to cut out doors because of the alignment issue, can’t believe I never thought of this method, thanks
I used rod and tube from K&S Precision Metals. The tube was "round brass tube number 8125" 1.57mm (OD). The rod was "brass rod number 8160" 0.81mm. But, use whatever sizes work for your particular model.
Awesome tutorial video Doug, I see I had made a couple of things the wrong way, but I can do a better job now, thanks for sharing my friend
Thanks for the video Doug! Beautiful work and video! I've always been pretty intimidated and somewhat uninterested in opening panels until now! Thanks for sharing!
Thanks for this video! I am trying to learn. 8:12 - Should I also grind the edge of the trunk lid, to make it look thinner, for the sake of appearance? Can you recommend a video that shows the process of fitting the body glass and the interior tub with the trunk hinges? Thank you for your patience!
Every build is a new learning experience! Once the trunk lid is loose you can fine tune the thickness from the underside. Yes, the front edge should be thin to be true to scale. I don’t know of a video off-hand, but once the hinge is positioned and attached, you may need to make some adjustments depending on the specific car. The lower edge of the glass may need to be trimmed; be careful because the clear plastic can be very brittle and crack easily. The interior tub may need to be modified, but it shouldn’t change the overall look from the outside of the car.
The absolute master!
Seems so obvious to set up your hinges while the doors etc are still attached to the model!
I'm going to be sure to implement this technique in my future builds!!
Also digging those saw blades too! I'll have to pick some up. Looks like the "thinner" saw blade would be good for going around corners and the wider ones, better for straight lines.
This was a very informative and amazing video! Thank you so much for sharing. I will definitely use this technique to hinge doors and trunks!
I would like to see the same technique but with the doors and how to cover the interior of the door.
We'll add that to the future videos list!
Very useful, will certainly try this next time. Currently tearing out hair on a bonnet and grill hinge system :(
Great video Doug, always more than one way to skin the cat.....😉😉😉
Very interesting article. Just wondering how you deal with a Model A door where the aft end of the door overlaps the door opening.
Great tutorial! I am still in the process of analyzing the best way to make the hinges, but I still haven't dared to make them on my own. I think your video will help me to just go for it! :) Thanks!
Great video and have never done it, maybe now I will try it. Have you ever done a tilt front end conversion to a kit ? There are kits that the kit maker has done it for us but how to if not. I do realize that it is not practical for most cars, ie '59 Cadillac, LoL. Cheers
I have. That's a great idea for a future video, thanks!
Perfect!
WOW!!! 🤯🤯
awesome!
Doug Whyte, watched, rewatched this presentation. Bravo! Great technique, especially the preplanning taking advantage of the one piece body molding to assure panel alignment after separation. Thank you.
?: couldn't help not noticing the drill press. I'm in the market to purchase. Your's...brand? Pro's/con's.
At your convenience.
Respectfully, jg
That's a Walker-Turner drill press from the 1930s. My grandfather bought it new. They ceased production in 1957. You can find these for sale, used, but I would recommend looking into a newer model.
@ModelCarMuse Indeed & thank you for your content... always instructive.
Hey Doug great video tutorial I have one question…well actually 2 questions. What size is the brass tube you’re using and what size is the rod that slides into the tube?
Keep them vids coming us modellers really do appreciate them!!
Thanks Doug!!
Glad you liked the video! The sizes I used are listed in the description under the video and there is an affiliate link to Amazon. Your needs may require a different size.
Great video! I’m building the 1/16 scale 1939 Jaguar SS 100 by MiniCraft. The doors are already separate from the body and I want to hinge them… they open from the back. Can you do a video on doors hinges? I’m guessing it’s probably similar to the trunk lid. I like your channel, I’ve learned a lot, I’m a subscriber, thanks.
thanks for subscribing! A door hinges video is being planned. And, yes, it similar to trunk hinges.
Hi Doug. Love your videos. What size brass rod & tube do you use to make your hinges? Thank you.
Thank you, glad you enjoy the channel! There is an affiliate link in the description under the video. I used rod and tube from K&S Precision Metals. The tube was "round brass tube number 8125" 1.57mm (OD). The rod was "brass rod number 8160" 0.81mm. But, use whatever sizes work for your particular model.