thanks engineer.your tutorial has completed my worries.it was simple,and straight forward.i am a cameroonian who has passion for structural design.it is my wish you be my mentor.
Aasif Altaf thanks dear for ur appreciation.......I have few video on AutoCAD on my channel ....kindly share all videos with your friends on Facebook and WhatsApp as much as u can
You are welcome dear .... thank you for nice feedback.... please like and subscribe, it really helps me when i get likes on my videos..... you can write to me your question on monimalikn73@gmail.com .... i will try to make videos on them
Great presentation sir. I wish if you could make presentation for building design for two storied building with CGI roofing truss and isolated foundation
Also make an video on eccentric footing design. Because we have to design a building which is covered by surrounding building. So in this case we can go with normalfooting.
jags.. one request to you if you can upload video 2storey building and in that you solving error msg in staad pro as well as going from foundation to terrace in details and explaining also..I knw it take a very long video such as an hour but if you could help me than it be good to do my final year project.. pls can you help me...
Ashish Mishra u are welcome dear..... kindly watch other videos too for staad and please share my videos with your friends on Facebook and WhatsApp as much as u can
what all load combinations to consider for the fdn design ? I have 40 different combinations . Should I take 1xDL + 1xLL only ? pl respond. great tutorial as always .
I love the tutorial though there is one point you have made an error. Deep and shallow foundations are not determined by depth, but rather by the type. Pad and mat foundations are shallow foundations even if they go 10m deep. Pile foundations are deep foundations even if it is 3m deep. Otherwise, I love the tutorial.
Sir I have a lot of question like why select fixed and from where u select 0.2D and How we will know weather it’s safe or not....really confused about it...thanks
useful and very informative. Really appreciate your work. But i wanna inquire, Can we design Isolated footing and Combined Footing simultaneously in One Multi-Storied Structure (Say G+6 structure, and footing design required for both isolated and combined footing). Would be grateful if you can clarify my doubt.
Thank you for such a nice feedback.... and for your question we can’t do both at the same time .... need to do separately..... I request you to like the videos to support me and subscribe for upcoming videos Let me know if you have any doubts.... i will try to solve them as much as i can
Hola soy tu seguidor pero te pediría de favor siempre dieras en todos tus videos la opción de configurar el idioma a español por favor, saludos desde México.
Hi sir I am facing one problem while starting foundation design.one pop up comes as attempted unsupported operations.how this can be resolved.please suggest.
Bro when try to open foundation desgin . Here 1. foundation design option 2 . Use all supports 3. Avaliable all cases and include all 4 . Run staad foundation Here is The problem 4 step run stadd foundation . It shows could not open staad foundation application .
Sir Professor pls help how could i remove the top bar reinforcement in the isolated footing.. As I notice in your detail the top reinforcement are present ... thanks a lot
@@Jags22079 but in my case when I start to enable detailed drawing option it will terminate at that time.. Now i need to design foundation for peb structure as pedestal column.can you help in this?
Good job Sir Professor pls help how could i remove the top bar reinforcement in the isolated footing.. As I notice in your detail the top reinforcement are present ... thanks a lot...As i Notice sir in the drawing detail time 12.55 in your video.. thnx
bro staad pro is working but staad foundation is not working. when i click foundation design in staad pro i dont get the option of Run staad foundation neither Run staad foundation advance. COULD YOU GUIDE ME.
why my staad pro foundation is not working, when i am open it "SELECT licence type is not configured yet. please run"SELECT license Assistant " to configure it " this msg show please get me out
Hello sir i have followed all your steps but when it comes to foundation design steps after I have clicked include all , run stadd foundation In the bottom is not coming ? Is there a problem with my software or laptop . Please help
Hello! Can I design my own foundation on this software and then check if it's appropiate for its loads? PS: Your videos have been very helpful for me, thanks a lot.
Bro u r a champ.
I completed my B tech project watching ur videos.
May god bless you with everything you dream of❤🎉.....
So happy to read your comment....thanks.. Please Like and Subscribe to support my channel..best wishes for your future 🙏
Helpful and Clear, I was amused by how u said..'Schedule' you nailed my man, great vid
thanks engineer.your tutorial has completed my worries.it was simple,and straight forward.i am a cameroonian who has passion for structural design.it is my wish you be my mentor.
Good job Jags. Appreciate your work!
gerard Peter thank u so much for such appriciation....... kindly watch other videos too on vast topics on my channel
Thank you dear
goo presentation. well done. continue to share such rich information with your subscribers.
Dear sir, really appreciate your efforts. this video very use full to me. thanks sir.
great work sir!
really appreciate your efforts.
Please do a full series of videos for autocad 2014 .
Aasif Altaf thanks dear for ur appreciation.......I have few video on AutoCAD on my channel ....kindly share all videos with your friends on Facebook and WhatsApp as much as u can
Very much helpful topic. Many many thanks
Awesome Jags, Appreciating job ... helpful vedios
Tek Nath thank you bro.. kindly like subscribe n share the videos to motivate
i like your video. VERY INFORMATIVE. THUMBS UP!
RVCARANTO CONSTRUCTION thanks dear
and also if wi have comibine footings, in case of at expansion joint?
Very clear on lisining, thankyou and i request you to please add mat foundation tutorial...
Thanks sir.... Such a great and helpful video for me.💐
You are welcome dear .... thank you for nice feedback.... please like and subscribe, it really helps me when i get likes on my videos..... you can write to me your question on monimalikn73@gmail.com .... i will try to make videos on them
Thanks a lot for this vid bro....
Great presentation sir. I wish if you could make presentation for building design for two storied building with CGI roofing truss and isolated foundation
Thank you so much sir...it is very useful viedo.
REALLY HELPFULL THANKYOU TO BOTH OF YOU
U r welcome
Also make an video on eccentric footing design. Because we have to design a building which is covered by surrounding building. So in this case we can go with normalfooting.
awesome and easy tutorial
vry nyc sir......waiting for advanc fundtn desgin videos
Upto how much level soil bearing strength is considered good
This is a nice video.pl place a video for mat footing of a building.
Bhut aachi video h sir..
Thank u dear
great very useful to me please do more
Thank u
Thank you for the video sir.
Can you make a video which depicts about the design of mat and pile foundation??
superb video...best ever online tutorial..all the best for future...👍👍👍👍👍👍
saurabh roy your feedback made my day.....keep watching and kindly share with your friends
jags.. one request to you if you can upload video 2storey building and in that you solving error msg in staad pro as well as going from foundation to terrace in details and explaining also..I knw it take a very long video such as an hour but if you could help me than it be good to do my final year project.. pls can you help me...
good job plz shear mat foundation also, and whenever any plan I want to some isolated and some mat some combine so how to complete work
Bro how to fix the dimensions of beam and column please tell me btw thanks for the video
nice video sir
Thank you dear ..... like and subscribe to support the channel
nicely explained !!
Good video. Thanks.
If we want to make it on single bottom mesh then?
What is the depth of foundations from GL
Great video brother. i want to know How much accurate is STAAD PRO in struture design compared to the structure design calculated manually ?
Jags, i cannot go to foundation when i click the foundation above
cool.....good
Praveen PL kindly share with friends and hit like button
Thank you so much, I got it...
Very nice video .thanks i am also using staad pro . While designing mat foundation meshing has been done . But unable yo perform analysis. Pl help
really helpful video... thankyou for sharing !!
Ashish Mishra u are welcome dear..... kindly watch other videos too for staad and please share my videos with your friends on Facebook and WhatsApp as much as u can
ok brother i will share the links with my frnds also.
Ashish Mishra lots of thanks...feel free to ask for any doubt
it is of valuable info..tq sir
You are welcome..... please like the video to support me
Thank you sir... please make a video on combine footing please
what all load combinations to consider for the fdn design ? I have 40 different combinations . Should I take 1xDL + 1xLL only ? pl respond. great tutorial as always .
i too need this one ,please help me if you know this to this gmail shaikkhaleel340@gmail.com
Useful Video. Thank you...
You are welcome..... please like the video to support me
What to do when run the analysis get the message failed to generate sheet
Great presentation ; thanks
Thank you dear for such good feedback…. Please Like and Subscribe to support my channel, it really helps
awesome . thank you
you are using licenced vesion ? what is different in crack & licenced structure design ? and how much for licenced version?
Hi Sir, what if we need to check result and optimise it?
thank you very much sir🧡
Hello. Is it possible to fix overall depth including pedestral and footing to particular value?
i think yes ....i haven't tried particularly.......try it and send me file ....please share videos ....
sir how to save all these 3 diff drawings ?
how to consider pedestal ?
very nice video sir.
i have doubt in design and analysis of strip footing in staad pro, can you give some idea?
Nice video sir
Thank you
Brother from where do we know about depth of foundation ?
I love the tutorial though there is one point you have made an error. Deep and shallow foundations are not determined by depth, but rather by the type. Pad and mat foundations are shallow foundations even if they go 10m deep. Pile foundations are deep foundations even if it is 3m deep. Otherwise, I love the tutorial.
Tha k you for your honest review... and thank you for correcting me .... like and subscribe to support the channel
Rcc water tank circular and rectangular for overhead aur underground ke liye design ki videos hai??
Sir I have a lot of question like why select fixed and from where u select 0.2D and How we will know weather it’s safe or not....really confused about it...thanks
sir,u havnt assigned live load & load combinations...is it fine?
useful and very informative. Really appreciate your work. But i wanna inquire, Can we design Isolated footing and Combined Footing simultaneously in One Multi-Storied Structure (Say G+6 structure, and footing design required for both isolated and combined footing). Would be grateful if you can clarify my doubt.
Thank you for such a nice feedback.... and for your question we can’t do both at the same time .... need to do separately.....
I request you to like the videos to support me and subscribe for upcoming videos
Let me know if you have any doubts.... i will try to solve them as much as i can
Hola soy tu seguidor pero te pediría de favor siempre dieras en todos tus videos la opción de configurar el idioma a español por favor, saludos desde México.
Bro can u make a pump house of 500 kl in Jaipur
Hi sir
I am facing one problem while starting foundation design.one pop up comes as attempted unsupported operations.how this can be resolved.please suggest.
Thanks buddy
You have made this video for others to learn or for your practice?
Hello.
where to find this program
how staad pro drawing output export in AutoCAD?
please create model of pile cap especially 3 group pile using FEM model
Can we adjust foundation size 3m is too much
Yes we can as per our requirements..... please like the video to support the channel.... it really helps me to reach more people
How to print isofoot design summary?
how to design for eccentric footing
**good
Bob Robert thanks...kindly share with friends...
Can we do Eccentric footing design as well ??????
Yes .... please like the video and subscribe to help and motivate me
Loads & factors are to be assigned or not?
Kishor Behera yes
Thanku sir🎉
You are welcome... please Like and Subscribe to support my channel
How to design eccentric footing
After selecting the load for foundation design in my staadpro Run STAAD foundation command is not visible ...
I need Staad pro ss4 software will you please provide link
Sir why are you all cobination load including stadd foundation ???, This load larg amount of load
Bro when try to open foundation desgin .
Here 1. foundation design option
2 . Use all supports
3. Avaliable all cases and include all
4 . Run staad foundation
Here is The problem 4 step run stadd foundation .
It shows could not open staad foundation application .
thank you sir
hala hamed u r welcome..kindly share the video
Sir Professor pls help how could i remove the top bar reinforcement in the isolated footing.. As I notice in your detail the top reinforcement are present ... thanks a lot
As i Notice sir in the drawing detail time 12.55 in your video.. thnx
Hi my staad foundation often terminated when using what may be the issue?
It sometimes happens with me as well but not too often.....
@@Jags22079 but in my case when I start to enable detailed drawing option it will terminate at that time..
Now i need to design foundation for peb structure as pedestal column.can you help in this?
Hello sir I am doing project on soil structure interaction on electric tower can you help me how to design soil and soil interaction
Good job Sir Professor pls help how could i remove the top bar reinforcement in the isolated footing.. As I notice in your detail the top reinforcement are present ... thanks a lot...As i Notice sir in the drawing detail time 12.55 in your video.. thnx
Brother i need to check that i i will try to make a video for that .... thank u
bro staad pro is working but staad foundation is not working. when i click foundation design in staad pro i dont get the option of Run staad foundation neither Run staad foundation advance. COULD YOU GUIDE ME.
why my staad pro foundation is not working, when i am open it "SELECT licence type is not configured yet. please run"SELECT license Assistant " to configure it " this msg show please get me out
Sir eccentric footing design karu???
After the analysis what do notes over there say about???
Sorry didn’t get your question
When we analyse we can see error warnings and notes... over that what do notes represent or say about.
in this video 3.51 we can see error warnings and notes.it says about "one way slab" what is it about??? did you get that.
Good job please suggest me codes
Thank you
You are welcome.... please like the video to support the channel, it really helps me to reach more people
Hello sir i have followed all your steps but when it comes to foundation design steps after I have clicked include all , run stadd foundation In the bottom is not coming ? Is there a problem with my software or laptop . Please help
Hi thank you... I can’t say it without seeing.... please like my videos to support the channel
U get my point right what I mean to say ?
Yes, is your staad pro licensed version
Thx a lot bro, can u pls provide me witha crack for ss4 version?
Video is not clear, what are you doing. Please clear this. Thank yoy
Also how to safe those calculation sheets ?
Sir what to do if foundation overlaps
I am working on foundation video of a live project... it will be posted soon .... please like the video to support and subscribe for upcoming video
Go for combined footing
Hello! Can I design my own foundation on this software and then check if it's appropiate for its loads?
PS: Your videos have been very helpful for me, thanks a lot.
Foundation command not work please solve this problem
sir,which version is this ???
prawin gajbhiye service pack 4
sir i hv old version ....where i'll get cracked version of this new one...???
@archive.org...??
prawin gajbhiye u can get in on torrent search by staad pro service pack 4
I want this series of staad pro please provide link please
here is the link: th-cam.com/play/PLaf0BlcqDxZszPWNVsctz_wm79_aMulFH.html
kindly share the video as much as u can
staad pro software link. I am already your subscriber. please provide software new version link. that you are used in video
manikanta goli
archive.org/details/BentleySTAADProV8iSELECTSeries520.07.10.64
please send software link