I think all the viewers will benefit a lot if we include designing of all things like, staircase,ground and roof water tank, columns,beams,slabs, foundation etc and include report, all loads dead,live,wind,earthquake,combination loads etc. in one tutorial and show it on you tube
I know dear ..... problem with that is its going to be very time taking project and will be very large video..... like this one of 1 hour, but viewers don’t watch that long video .... what i am thinking is to make 10 videos in a series where i will start from beginning and will keep on adding all the elements in one project file and will use the same project file in all the videos .... please share your feedback about this idea .... also if you can help me with like and share of my videos, it really helps me to reach more people and motivates me
Thank you for your nice feedback and supporting me ..... .... education must be free n shared as much as can .... so spred my channel ... share the videos with whom so ever you can
Thank u so much ..Excellent Demo and Very much useful how to check it as safe and Economical point of view But this structure Beam size x=750mm and Y=500 mm ?? Is it to cover circular column ?? please explain
I have seen many similar video. Make a video with differnt column and beam section area upto 4 storey which is required for the building. analyse only ground floor colum with manual design . It will be tough but you can do it
Thank you, good video, but why did you use "Link Steps" when you made that second transitional repeat? I got a total number of beams of 730, and tried without "Link steps" and got 550.You already have the vertical beams created from that initial translational repeat (-3 m), so when you use link steps again to make the 10 floors you get double beams on each vertical?Maybe I am misunderstanding something here, but please clarify if you have time.Thank you for your videos by the way. They are a great help for me and many others.
Can you please make a video on a G+5 building with wind and seismic force as per IS code. Also please show the manual calculation as the value which you input in software does not make any sense unless you show how that value came.. But your videos do help a lot.😀
Thanks sir.very useful..May I know why we r not applying live load and load combinations..can u please upload a video to find size of beam and column we need to assume first
nice video with great explanation but there is one doubt that why we dont consider plinth/ grade beam in our structure because usually while construction we give plinth beam is given in structure?
Good job sir professor.... please explain if we are not going to use the reduce moment of inertia or the full section moment of inertia for the structural elements.. and if so how are we going to apply in staad pro. tnx
In Multistory building design tutorial I found one mistake. In the model you have attached plates of thickness 175mm as RCC slab at all level. Again you are assigned floor load of 5 Kn/sqm as Dead load at all levels. Already you have assigned self weight of all members i.e. beams col and plates.That way you have add self wt of slabs twice which is wrong. Also you have not added any Live load on slab which is required.
Thank you so much for such videos you share with us, its really helpful i really want to know that how can we design the share walls for Elevator, leaving space for DUCT and Staircase in RCC Multistoried Building Design, i search a lot but couldn't find. GOD Bless.
You haven't applied wind load and earthquake load on this building and i was getting error on that part. I saw few videos on staadpro designs and I found few foreigners were using PIN or HINGE joint too, Can You Please tell me, what is that. I really want to learn every single thing about this software.
Hello I am a structural designer and practicing from last 2 and half year in the same stream. My query for you is ""Can u give me a video for the calculation of wind force on a multistory building?? And how we can apply it on Staad Pro?
Thank you for swift response, 1) how can i design the Flat slab in multistorey Building, how v can merge the columns in Flat slab. 2) Can ve design the Drop Columns and Raft Foundation as well in Staad pro vi8. Please Suggest.
hi can u please post a video for wind loading on L shaped or irregular shaped structures ( please specify external and internal pressure coefficients directions and acting on each side of structure) thanks
Sir can you make a one video with full design of RCC Bldng ( Including all load - wind and seismic also). which was we are actually done on practical base.
I hav one doubt....stadd pro or etab which one is preferred for indian companies for structural design field ..i would like to go structural design field..which one is am choose?
You are welcome Here is my complete Staad pro tutorials series, it covers all the topics th-cam.com/play/PLaf0BlcqDxZszPWNVsctz_wm79_aMulFH.html Please like my videos, it really helps me to reach more people and please subscribe for more upcoming videos
How can you draw base in x and z plane, they both are different plane? U have to draw base or floor in x and y axis and should give building height in z axis
Paajji .... follow these videos for that in this we discussed about it hope it will help you th-cam.com/video/HV2Fr8qxTLs/w-d-xo.html th-cam.com/video/q6X_pJV-JGc/w-d-xo.html Please like the videos to support... it really helps me to reach more people
+Abhishek Purohit brother thank you very much part 2 of this video will be uploaded tonight......stay tuned ....and please share the video with friends
Follow this detailed video on how to read output file and find out which elements failed..... it is one hour long video, you will learn so many things....... one request, please like my videos to support me, it really helps me to reach more people th-cam.com/video/q6X_pJV-JGc/w-d-xo.html
I have prepared a separate video about column design follow this Basic Of RCC Column Design th-cam.com/video/aIsRlOFx0iA/w-d-xo.html Please like the video to support my channel
When i am going to create the plate trrough selecting beam along x and z and the clicking fill floor grid with plate button got massage of "no convex panel bounded by 3 or 4 beams is found to fill in with plate".
Make sure u r creating a plate with nodes which r in same plane .... best method will if u orient the model at a isometric view...... please dont go without liking the video
Dear Mr Singh please take a look in staad out put file of this video only beam and column SUMMARY OF PROVIDED REINF. AREA provided but not slab summary reinforcement area. Kindly solve this issue
Could you please make a video on it or suggest me a link of complete anylisy video with wind load and seismic on the struture. I am getting 1 error of USB load undefined
can you send me the link which explains 1. how to apply temperature loads . 2. how to add RAM connections . Also i have a doubt. Does the analysis results change when you add the ram connections?
its good for the individuals who doesn't have time for taking coaching of the same but have the desire to lean it good friend
IM from Indonesian country n I like this leacture 😆😆😆thank you for you learning
very good video bro ,
Thank you keeping making more !
Thank you for such a nice feedback.... please like n subscribe
U r rocking bro
Your video always helping us..
Thank you and carry on your work
Mr. Wrong thanks bro such a motivational feedback
Super and simple explanation.
Thank you dear.... Please Like and Subscribe to support.... it really helps me and motivates me to make more videos like this one
Thank you sir. It'very satisfying video. I learn a lot.
Thanks for such a nice feedback.... pleas like this video to support me
I think all the viewers will benefit a lot if we include designing of all things like, staircase,ground and roof water tank, columns,beams,slabs, foundation
etc and include report, all loads dead,live,wind,earthquake,combination loads etc. in one tutorial and show it on you tube
I know dear ..... problem with that is its going to be very time taking project and will be very large video..... like this one of 1 hour, but viewers don’t watch that long video .... what i am thinking is to make 10 videos in a series where i will start from beginning and will keep on adding all the elements in one project file and will use the same project file in all the videos .... please share your feedback about this idea .... also if you can help me with like and share of my videos, it really helps me to reach more people and motivates me
Also please watch this video and share your views th-cam.com/video/q6X_pJV-JGc/w-d-xo.html
Thank you so much, please do more exercises.
nice work, i love your videos sir thanks alot
Thank you for your nice feedback and supporting me ..... .... education must be free n shared as much as can .... so spred my channel ... share the videos with whom so ever you can
Very useful. Thanks for uploading.
+Shivani Singh ya........ Most certainly
amazing video sir & really helpful.
Thank you.... please like the video to support me
Thank you Sir
The video is of much help
Tha k you Kunal ... please like and subscribe to support me
Kindly give a video with different section of coloum and beams with shear walls in a project
Best video in stadpro
thank u so much ..
this video give so much useful information in design a beam & column
thank you so much for such a nice feedback.......feel free to ask in case of any doubt and please like and share the videos...
many thanks for this video,Sir..
wow sir , very good video👌👌
very usefull for me☺
U r welcome
Thank u so much ..Excellent Demo and Very much useful
how to check it as safe and Economical point of view But
this structure Beam size x=750mm and Y=500 mm ?? Is it to cover circular column ?? please explain
I have seen many similar video.
Make a video with differnt column and beam section area upto 4 storey which is required for the building. analyse only ground floor colum with manual design . It will be tough but you can do it
Tha k you for the suggestion..... i will do that
nice video,kindly post shed with truss roofing resting on RCC columns & beams
Great. Can you do a design of an amphitheater complete with the sitting terrace and some sitting terrace canopy?
thanks a lot and a superb video brother.... liked,subscribed and shared.
thank you so much to share it with us
maryam hasan u r welcome
it's a best video designed rcc building.But how consider a staircase load in multy story building
Thank you, good video, but why did you use "Link Steps" when you made that second transitional repeat? I got a total number of beams of 730, and tried without "Link steps" and got 550.You already have the vertical beams created from that initial translational repeat (-3 m), so when you use link steps again to make the 10 floors you get double beams on each vertical?Maybe I am misunderstanding something here, but please clarify if you have time.Thank you for your videos by the way. They are a great help for me and many others.
it is mind blowing..................superb
Mukesh Sharma thank you buddy for such a nice feedback......
Can you please make a video on a G+5 building with wind and seismic force as per IS code. Also please show the manual calculation as the value which you input in software does not make any sense unless you show how that value came..
But your videos do help a lot.😀
thank you for this very informative video..keep it up
U r welcome dear 😊
Very useful...thnks sir😇
very much informative...thanks...,,☺️
vaibhav chate welcome
Thanks sir.very useful..May I know why we r not applying live load and load combinations..can u please upload a video to find size of beam and column we need to assume first
Hi you did a good job. please can you do advanced design for the reinforcement and detailing. Thanks
+INVESTMENT thanks for your valuable feedback dear...Sure ...Kidnly share some specifications....I will post a video
nice video with great explanation but there is one doubt that why we dont consider plinth/ grade beam in our structure because usually while construction we give plinth beam is given in structure?
Excellent video.Can you add a video on design of Diaphragm wall for underground metro project?
Good job sir professor.... please explain if we are not going to use the reduce moment of inertia or the full section moment of inertia for the structural elements.. and if so how are we going to apply in staad pro. tnx
In Multistory building design tutorial I found one mistake. In the model you have attached plates of thickness 175mm as RCC slab at all level. Again you are assigned floor load of 5 Kn/sqm as Dead load at all levels. Already you have assigned self weight of all members i.e. beams col and plates.That way you have add self wt of slabs twice which is wrong. Also you have not added any Live load on slab which is required.
Please make a video on foundation
I already have made video on foundation…. Please watch that also please Like and Subscribe to support my channel
Can you please make a video on multistorey building with basement.. Thanks in advance
Very good video..
What is the difference between area loads, floor load and plate load?
Thanks . For this video
Mustapha Bulale u r welcome
Thank you so much bro.
Very helpful.
If possible can you please upload videos on Etabs and safe. Please bro
Nice explanation dear
Hey great video but I noticed you didn't add any live load why?
It helps me a lot. Thanks :)
U r welcome
Thank you so much for such videos you share with us, its really helpful i really want to know that how can we design the share walls for Elevator, leaving space for DUCT and Staircase in RCC Multistoried Building Design, i search a lot but couldn't find.
GOD Bless.
NSA 05 follow this video
NSA 05 th-cam.com/video/lEXJxVdZaZQ/w-d-xo.html
You haven't applied wind load and earthquake load on this building and i was getting error on that part.
I saw few videos on staadpro designs and I found few foreigners were using PIN or HINGE joint too, Can You Please tell me, what is that.
I really want to learn every single thing about this software.
Hello
I am a structural designer and practicing from last 2 and half year in the same stream.
My query for you is
""Can u give me a video for the calculation of wind force on a multistory building??
And how we can apply it on Staad Pro?
Thanks sir for this nice video, please explain the reinforcement detail for the slab for this video, thanks again.and what a bou
good job. Can you do an example with expansion joint.
CAN YOU SHOW TO YOUR VIDEOS HOW TO DESIGN THE SLAB TOO IN THE WHOLE STRUCTURES
Hello sir.
Why you don't consider wind or seismic loads
hello jage,please load video on oil and gas related structure like sleepers,precast foundation also.
vinod kumar aaroo sure
Acha explain kiya hei bro
Thank you bro...... kindly share my videos with your friends
Thank you for swift response,
1) how can i design the Flat slab in multistorey Building, how v can merge the columns in Flat slab.
2) Can ve design the Drop Columns and Raft Foundation as well in Staad pro vi8.
Please Suggest.
Thank you for the video, if I wanna build a suspended multi story building how should I do it?
Please upload a video on steel structure
Examples of isolated, combined and raft( mat) Foundation design using staad pro support reactions (Fy, Mx, Mz)
hi can u please post a video for wind loading on L shaped or irregular shaped structures ( please specify external and internal pressure coefficients directions and acting on each side of structure)
thanks
can you give a video of seismic analysis of couple shear wall system
Hi Jags, the take off command does not include the Reinforcement in slab. Why is that so ? And how to get the take off for reinforcement in slab?
sir live load nhi liya..?
Sir please give one more video on rc building with steel bracings ( concentri nd eccentric building)
Help Mee renu
Sir can you make a one video with full design of RCC Bldng ( Including all load - wind and seismic also). which was we are actually done on practical base.
plz provide a video on "design and analysis of diagrid structure"
I hav one doubt....stadd pro or etab which one is preferred for indian companies for structural design field ..i would like to go structural design field..which one is am choose?
Thanks you very much
You are welcome
Here is my complete Staad pro tutorials series, it covers all the topics
th-cam.com/play/PLaf0BlcqDxZszPWNVsctz_wm79_aMulFH.html
Please like my videos, it really helps me to reach more people and please subscribe for more upcoming videos
Sir which is better staad pro or etab for analysis and design
in result which no. of bar take from the list of no. of bar for beam
Dear sir, you are showing grid 10 & spacing 5m but such as when grid distance will be fraction 5.13 in that case what will do. pl show your vedeow
Thanks for sharing.
Please let me know use of envelopes and briefs in Sayad pro...
Thank you bro
Vikas Tanwar u r welcome..... kindly like the video...... it will help me
How can you draw base in x and z plane, they both are different plane? U have to draw base or floor in x and y axis and should give building height in z axis
thankyou .god bless u
Shibu Thomas welcome
Good one👍 super
without providing offset to beam and column does the building design be accurate??? do reply please
Jaggu paajji how to make calculations for reinforcement which we make on AutoCAD drawings to show beam details after getting it from output file
Paajji .... follow these videos for that in this we discussed about it hope it will help you th-cam.com/video/HV2Fr8qxTLs/w-d-xo.html
th-cam.com/video/q6X_pJV-JGc/w-d-xo.html
Please like the videos to support... it really helps me to reach more people
failure kaise check krenge... kya is structeure
me koi failure hai .. ye kaise pata chlega
thanks bro.very useful.
+Abhishek Purohit brother thank you very much part 2 of this video will be uploaded tonight......stay tuned ....and please share the video with friends
Thanks for these video
U r welcome
How to identify that which is curtail bar in beam and which is continuous bar?
Please make complete video on actual building project..here u have taken arbitrary loads..but in actual it is complete different..pls sir
How check weather the column and beam fail
Follow this detailed video on how to read output file and find out which elements failed..... it is one hour long video, you will learn so many things....... one request, please like my videos to support me, it really helps me to reach more people
th-cam.com/video/q6X_pJV-JGc/w-d-xo.html
thanks pro... go ahead
Column kibsize kitni lena he ye kahase pata chalega
I have prepared a separate video about column design follow this
Basic Of RCC Column Design th-cam.com/video/aIsRlOFx0iA/w-d-xo.html
Please like the video to support my channel
@@Jags22079 sir what is best for civil engineering softwares..i mean a laptop or a desktop???
What is the solution of warnings?
When i am going to create the plate trrough selecting beam along x and z and the clicking fill floor grid with plate button got massage of "no convex panel bounded by 3 or 4 beams is found to fill in with plate".
Make sure u r creating a plate with nodes which r in same plane .... best method will if u orient the model at a isometric view...... please dont go without liking the video
Sir sesmic parameters generate nhi hora.....using v8i....why sir
i want to know that after designing whole structure which single command we use to check all the failed members at one go
Please upload that video also
Dear Mr Singh please take a look in staad out put file of this video only beam and column SUMMARY OF PROVIDED REINF. AREA provided but not slab summary reinforcement area. Kindly solve this issue
hiii bro please make video load calculations and how to transfer these loads to foundation
why you not assign wind load seismic load ?
Thanks dear.
You are welcome… Please Like and Subscribe to support my channel, it really helps me
How to find loads?....DL..LL.for a particular building.Slab and Foundation design are not available in staadpro??
it's a best video designed rcc building.But how consider a staircase load in multy story building.
Is there necessity to apply wind load and sesmic load on the structure?
It depends on the type of the building
Could you please make a video on it or suggest me a link of complete anylisy video with wind load and seismic on the struture. I am getting 1 error of USB load undefined
can you send me the link which explains 1. how to apply temperature loads . 2. how to add RAM connections . Also i have a doubt. Does the analysis results change when you add the ram connections?
Sir please post a video for desing of lecture hall in staad pro
Can you send me specifications.... like the videos to support me... it really helps
@@Jags22079 Lecture hall capacity is 100 students
Only this much info is provided.
other info are to be assumed and considered on our own
What are the nodes distance . Plz do comment
Very nice....sir