Your videos look like How It's Made productions. Very professional and wish this was available to the public. Pretty sure it would be expensive but after seeing all this I believe it's worth it.
Why are the before/after lcd different? The first one while removing glass in freeze machine has a blk stamp and the one during cleaning has a red stamp... does this mean there is a high damage rate while refurbishing? We would like to buy this machine but the defect rate is concerning me . Any feedback would be highly appreciated. Thank you for the video ,, explanations are great for learning.
Thanks for the message. Could you please leave us your contact info? About the defect rate, our sales and tech engineers will give you the detailed answer. or please leave us a message at our official website: www.rewatechnology.com Any questions and demands please feel free to contact us at: sales@rewatechnology.com
I haven't noticed it, can you post the video timings? Yet, how long do REWA takes to refurbish a display? An hour and more it seems... The bubble removing machine seems to make your operators waste precious time closing the lid...
Any questions and demands please contact our sales team at: sales@rewatechnology.com, or just leave a message at our official website: www.rewatechnology.com.
Helo! Where can I buy this frame separator machine in video 3:57? I would to buy this separator machine not another frame separator. And the spray where I can buy :)
Hi, Akos. Could you please leave us your contact info? Our sales will contact you soon. or please contact our sales Candy at : Email&Skype: candy@rewatechnology.com
does the phone remain same after screen replacement? Any water proofing issues? and does the touch work smoothly as before? I still have mine under warranty and I need to replace it cause there's a purple line appearing but I'm too skeptical about how the phone's gonna be after replacement cause there's just a month of warranty remaining and what if things go bad after that
Wow that was pretty interesting. I just sent off my S7 edge to samsung as I had a defective screen, would be good to see what there process Is for repairs
Watching this video reminds me of a joke. The students at a certain all girls school would smooth out their lipstick by kissing the mirrors in the bathroom. The principal rounded up the usual suspects and began to lecture them on the cost and physical expense needed to keep the mirrors cleaned. She then had the janitor demonstrate the process. He begins by dunking his mop into one of the toilets, then applies the mop to affected area, rigorously. This process was repeated several times for each of the remaining lipstick stains. From that point on, the school didn't have a lipstick problem.
hi I have around 5 years in this business, doing screens refurbishing. .and I ahve all the tools such a freezing machine, separator laminator etc, etc..the this is I alredy try to do this galaxy s7 edge and everything looks to going well except when after the lcd is been clean the remaining glue, for some reason half of the touch function stop working, I use the 8333 and Hexana cleaners, the antistatic pads and wrist band, but still no working any advise Renewal corp??
Thanks for the comment. Please test the LCD after each step to confirm which step went wrong. If you can make sure the problem is occurred during glue removing, it would be caused by incorrect operation. Send us a short video about the operation if necessary, we will try to find the problem according to the detailed situation. Email: support@rewatechnology.com Skype: +86 15002060116
Rewa i have some questions: 1) can you separatee the glass and lcd without divide the lcd by the frame? 2) can you use uv glue for the process instead the oca film?
Bonjour, pour prévenir les débutants, le bloc haut parleur est collé et l'écran est très très bien collé (j'ajouterais une quatrième étoile à cause de cela). Il est sans doute préférable d'acheter l'écran avec le châssis (à voir la différence de prix). Faites attention a ne pas vous blesser également avec les écrans cassés qui ont tendance malheureusement à se casser en mille morceaux.
Sir can you please tell us which is the best laminating machine? YMJ is better or other machines like MAG, OCAmaster or TBK? Which is the best and safe? Please reply.
REWA Technology Yeah, I have been watching many S7 edge disassembling videos, and they all make the same mistake. Could you explain me how does the water cooling system work? It look like just a piece of copper
I have a question. I have a freezer and now i need buy bubble remover but i have a question.. why you use laminator? Laminator and bubble remover is not the same? what is the difference? can i use only bubble remover? I hope a reply, good day.
Not sure if this question is asked before but does the phone continue to remain water proof after replacement of screen/ display or digitizer. Even if the it's replaced at Samsung authorised service Center's. can somebody please share there expert advises.
I have try a s6 edge with hot plate , most of the time touch panel will malfunction after saperate , I think cold saperation can prevent touch panel bring destroyed
All my past an present phone have been Samsung right now I have a Samsung S8+ that has a crack on the bottom of my screen how do I get it too your Co. for repair an how much will it cost I love my phone an want to keep it
Hi, Dray Day. Thanks for your interests. The machines used in the video are all listed in the description below the channel icon. Please click "SHOW MORE” to check.
Here for it: www.rewatechnology.com/samsung-galaxy-s7-edge-oca-glue-sheet-50pcs-by-mitsubishi-11711.html Any questions and demands please feel free to contact us at: sales@rewatechnology.com.
when i separate the frame rhe lcd always bave lines or will damnage. and the pressure crate on the opposite part by the freeze machine will broken the lcd when in the frozen process
Sure if you want a shit job of an S7. There's a reason they did it the way they did in the video with the equipment they have. LOCA will leave it all wavy and looking like ass. It worked back in 2014 on rigid to rigid screens but they don't use it anymore. And never used it on curved screens. Stick to handing out flyers at Walmart.
I think that I need this fabulous equipment to repair my Galaxy S7. My Phone had its first 5 minutes (out of the box) to be activated, when it fell of my hand to the ground cracking the front glass and I don't know if the LCD too. The front glass is very cheaper to get for less than 15 dollars, but the LCD Digitizer cost over 250 dollars. Maybe I need to take the insurance of my cellular company and pay only 200 dollars (deductible) to fix the front glass and the LCD digitizer, but the bad news is that with this insurance I just gonna to recieve a "refurbished Galaxy S7", instead a new one :(
+Halmer Omali, that's correct. Maybe the cure (receiving the refurbished S7 from the insurance instead a new one) could be worst than the disease (just the cracked front glass, the LCD is ok). It's Not a good deal having those new cellphone, because when you've paid almost 750 or 800 dollars for that technology, you will get very angry when you see that in a minute your cellphone is gone to the ground and never will be the same again.
meu core 2 SM-355HN veio da Itália, mas nenhum rom tenho conseguido instalar nele fica o triangulo amarelo com exclamação e um monitor. Alguém já passou possou por isso e teve sucesso?
Brandon Berrios no , when samsung does the repairs , everything goes back to normal , they re apply the seal that keeps the phone waterproof it's not that hard ...
I've heard differently from people who've actually had their screens replaced. They said that the seal is reapplied, but it is no longer certified IP68.
Hi, need your help in this. My S7 display is broken and its touchscreen doesn't work. I went to a place and they told me that to repair it they would must have to replace the battery as well. Can you tell if that's true, please? Cause It doesn't make sense to me. Thanks
REWA Technology Thanks for your reply. The phone it's on, I can tell, because both back and tab buttons light up. The screen is black because hours after I dropped it, the black zones started spreading all over the screen until it covered it all. The battery had no problem.
Yes, we offer LCD refurbishing service. Could you please leave us your email or other contact info? Our sales will send the price and details to you soon. or please contact our sales at email: frankynew@rewatechnology.com skype: Rewasales35s
Your videos look like How It's Made productions. Very professional and wish this was available to the public. Pretty sure it would be expensive but after seeing all this I believe it's worth it.
What isup
I hope you guys gain popularity fast. This repair was great.
Thanks a lot. We will keep improving!
ain't no body got a bubble removing machine
Majed AY I do
lets unite to buy one :'(
bubble removing machine is just a machine which create a vaccum area
just buy a 250 doller vacuum pump and buy a 50 doller vacuum chamber
Frank.a.meyer
You guys do it so perfectly and smoothly it looks so easy 😄
In my country, the cost to replace the screen + LCD on an s7 edge is equivalent to buying a new iPhone 6
in the country where i live replacing the lcd lens costs about 100 dollar
Ken Chaichana what happened??????
where the fuck you live?
Edward Carnajz someplace thay dosent manufacturer the phone or have a official Samsung store...its obvious
i bet thats somewhere here in ja
Why are the before/after lcd different? The first one while removing glass in freeze machine has a blk stamp and the one during cleaning has a red stamp... does this mean there is a high damage rate while refurbishing? We would like to buy this machine but the defect rate is concerning me . Any feedback would be highly appreciated. Thank you for the video ,, explanations are great for learning.
Thanks for the message. Could you please leave us your contact info? About the defect rate, our sales and tech engineers will give you the detailed answer. or please leave us a message at our official website: www.rewatechnology.com
Any questions and demands please feel free to contact us at: sales@rewatechnology.com
I haven't noticed it, can you post the video timings? Yet, how long do REWA takes to refurbish a display? An hour and more it seems... The bubble removing machine seems to make your operators waste precious time closing the lid...
Professionally done! unfortunately we lose the waterproofing unless we re apply that thick black glue.
You can apply a layer of waterproof adhesive.
Wow ! How much would all them machines cost ? Truely amazing work . I'd love to learn how to repair phones like you .
Any questions and demands please contact our sales team at: sales@rewatechnology.com, or just leave a message at our official website: www.rewatechnology.com.
Does N-Hexane do a better job at removing LCD adhesive than PCB cleaner or 99.9% isopropyl alcohol?
Helo! Where can I buy this frame separator machine in video 3:57? I would to buy this separator machine not another frame separator. And the spray where I can buy :)
Hi, Akos. Could you please leave us your contact info? Our sales will contact you soon.
or please contact our sales Candy at : Email&Skype: candy@rewatechnology.com
whats the diffrent between s7 original parts and refurbish ? same or got diffrent ? . anyway nice job, very professional !!
not water resisten
Shaiful Sykes not so professional when they use wireless antistatic straps xD btw they dont ground you like wired antistatic strap would
Hello friend, nice work.
Can You tell me if it is necessary to use the freezer machine for separating lcd from glass?
Thank you
Yes, freezer machine is necessary at present.
Ok, what are the benefits of using the freezer machine istead of molybdenum wire?
Thank you.
rewa technians are engineer level
amazing everytime, what those plastic sheet to seperate the bezel?
It is a plastic pry piece, you can also use something similar instead.
does the phone remain same after screen replacement? Any water proofing issues? and does the touch work smoothly as before? I still have mine under warranty and I need to replace it cause there's a purple line appearing but I'm too skeptical about how the phone's gonna be after replacement cause there's just a month of warranty remaining and what if things go bad after that
Boa noite, fiquei super interessado, quando vem para o Brasil?
Desculpe por não ter filial no brasil no momento
can you pls. link all the machines u used in this video. i want to know about your equipments.
pretty satisfying to watch !!
Wow that was pretty interesting. I just sent off my S7 edge to samsung as I had a defective screen, would be good to see what there process Is for repairs
Put a new screen on it.
You can repair but you will lose the water protection
And if your S7 edge fall in water
can you use any other alternatives to clean the lcd?
There was a flaw in the touch of the screen this time 11:11, right?
Watching this video reminds me of a joke.
The students at a certain all girls school would smooth out their lipstick by kissing the mirrors in the bathroom. The principal rounded up the usual suspects and began to lecture them on the cost and physical expense needed to keep the mirrors cleaned.
She then had the janitor demonstrate the process. He begins by dunking his mop into one of the toilets, then applies the mop to affected area, rigorously. This process was repeated several times for each of the remaining lipstick stains.
From that point on, the school didn't have a lipstick problem.
Very meditative to watch. Thank you !
Would you kindly tell, what parameters (temperature, vacuum pressure, pressure and time) do you use for lamination and autoclave? Thanks in advance.
Hello Rewa,
What's plastic you use to disasemble frame bezel ?
Thank
hi I have around 5 years in this business, doing screens refurbishing. .and I ahve all the tools such a freezing machine, separator laminator etc, etc..the this is I alredy try to do this galaxy s7 edge and everything looks to going well except when after the lcd is been clean the remaining glue, for some reason half of the touch function stop working, I use the 8333 and Hexana cleaners, the antistatic pads and wrist band, but still no working any advise Renewal corp??
Thanks for the comment. Please test the LCD after each step to confirm which step went wrong. If you can make sure the problem is occurred during glue removing, it would be caused by incorrect operation. Send us a short video about the operation if necessary, we will try to find the problem according to the detailed situation.
Email: support@rewatechnology.com Skype: +86 15002060116
sorry but in the separation process can be possinle some pixel burned?
Rewa i have some questions:
1) can you separatee the glass and lcd without divide the lcd by the frame?
2) can you use uv glue for the process instead the oca film?
Thanks for the message.
1. No, we can't.
2. Yes, we can use LOCA glue instead of OCA film.
thankyou a lot for your time you are the best pro
who do this in the usa? i need a service on mine
is it possible to replace the orignal s7 g930f with a clone lcd screen ?
Excellent and clean process.
What is the music called from the video. its nice and chilled. Thanks for the video
it takes skills and patience, before you start you need to warm up stretch and plenty tai chi to relax your nerves.
where to buy all these machines
Bonjour, pour prévenir les débutants, le bloc haut parleur est collé et l'écran est très très bien collé (j'ajouterais une quatrième étoile à cause de cela). Il est sans doute préférable d'acheter l'écran avec le châssis (à voir la différence de prix). Faites attention a ne pas vous blesser également avec les écrans cassés qui ont tendance malheureusement à se casser en mille morceaux.
which liquid or gas form is used while seprating glass???
Can I replace the back cover of my Samsung Galaxy S7 SM-G930V Phone ?? it has several cracks I think its glass ?
Y porque no probó la pantalla cuando fue removida?
Para asegurarnos de que el lcd funciona normalmente, debemos probarlo después de cada paso.
4:30 torn screen lol
5:30 it's visible that it's torn. pretty sure u changed it later
it was only the factory copper tape !damn dude
can you still do it with everything but the laminating machine?
Sir can you please tell us which is the best laminating machine? YMJ is better or other machines like MAG, OCAmaster or TBK? Which is the best and safe?
Please reply.
YMJ machine is best for edge
nice work sir
2:33 LCD? It's an amoled display
You are quite right. But most of our customers are used to calling it as "LCD". So we still use LCD as our product name and keywords.
REWA Technology Yeah, I have been watching many S7 edge disassembling videos, and they all make the same mistake. Could you explain me how does the water cooling system work? It look like just a piece of copper
+Joani Mariano check out JerryRigEverything's channel, he explained how it worked in his teardown
Where can we get 530 Cleaner. Does Rewa sell it?
The sell of 530 is suspended for the logistics problem. So sorry for the inconvenience.
Thank you. Do you guys sell a comparable substance? Will wd40 contact Cleaner work?
What's the spray can product ?
It is 530 cleaner, which is used to remove the bezel glue and clean.
Is the same with 853 cleaner spray falcon?
are you on watts app?
Don
I have a question.
I have a freezer and now i need buy bubble remover but i have a question.. why you use laminator?
Laminator and bubble remover is not the same?
what is the difference?
can i use only bubble remover?
I hope a reply, good day.
Very good work thank you
very nice....for knowledge
amazing..! good job 👍
where's your workshop? i wanna fix my S7 edge too..
that's some professional work right there.
Not sure if this question is asked before but does the phone continue to remain water proof after replacement of screen/ display or digitizer. Even if the it's replaced at Samsung authorised service Center's. can somebody please share there expert advises.
It is not water resistant after refurbished, but the water-proof function can be regained.
can you please explain how water proof function can be regained? thank you
Please tell me,it's possible to remove glass with hot separator and wire?or all edge screens need freezing machine?
I have try a s6 edge with hot plate , most of the time touch panel will malfunction after saperate , I think cold saperation can prevent touch panel bring destroyed
It is so easy to damage the screen with the hot separator and wire. We suggest separating with the freezing machine
ok,thanks.and please tell me,every time when i removed glass the back and options buttons stops working,why its happend?
because those buttons are on the touch key lights sensor flex not the screen.
i have freeze machine, but from 10 pieces only 3 are with working back and option button. What i do wrong?
Hey where could i get it tin plastic from
Here for it: www.rewatechnology.com/disassemble-pry-sheet-13476.html
All my past an present phone have been Samsung right now I have a Samsung S8+ that has a crack on the bottom of my screen how do I get it too your Co. for repair an how much will it cost I love my phone an want to keep it
what r the names of the equipments used in the video.....im interested in purchasing
Hi, Dray Day. Thanks for your interests. The machines used in the video are all listed in the description below the channel icon. Please click "SHOW MORE” to check.
Rewa can you try remove glass only from edge without removing lcd from frame ?im was using that way with galaxy s4 and s3
Samsung S7 edge Broken Screen Glass Only Repair / Refurbish :th-cam.com/video/os41CFOci7s/w-d-xo.html&lc=z12htxlzjumtepjba04cgxdq3njftptj3a4
Rewa ,its possible freezing curved oled's to -140 degrees can broke some lines on flex etc ? i heard about that
Sir ap kaha se ho mujhe bhi samsung s6 adge ki glass change krwani h plzzz mujhe bataye
mine is like glitching but idk how to fix cause im using my old phone to write this but its glitchy
Idc
how much do you charge
Would it be advantage to get it to -180 for ease and faster separation?
nope
very nice and helpfull
Its a miracle wow really awesome
can i upgrade the s7 space from 32GBto128GB?
Which oca paper use
Here for it: www.rewatechnology.com/samsung-galaxy-s7-edge-oca-glue-sheet-50pcs-by-mitsubishi-11711.html
Any questions and demands please feel free to contact us at: sales@rewatechnology.com.
Where do i get the mould? I need that urgently!!
Please send an inquiry to sales@rewatechnology.com, Then our sales will contact you with the details.
How to know if buying a screen j7pro is original or high copy is it
Is it still waterproof?
No, it is not water-proof after disassembled, but this function can be recovered after processing.
REWA Technology what do you mean with "can be recovered after processing"
Indeed what does that mean, after what processing? My screen is cracked and I would like to retain its water resistant capability.
after watching the video, i wont be surprised they have some machine that magically fixes the seal...
when i separate the frame rhe lcd always bave lines or will damnage. and the pressure crate on the opposite part by the freeze machine will broken the lcd when in the frozen process
Be careful when separate the frame and LCD.
For frozen machine, take care of the frozen time. Don't keep it in the machine too long.
Damaged display. 6:55
tutorial excelente saludos de peru.
how can i contact you, i'm interested on buy some of yours machines?, i let a message in the web page, and i not have a response.
Sorry for the trouble. Could please tell us your register name or email? We will check and contact you soon.
how much is this? my s7 edge screen is cracked and i hate looking at it
Sorry that we do not offer this service at present, but we offer training and all the parts in the video
the screen cost 269 just to buy
Sure if you want a shit job of an S7. There's a reason they did it the way they did in the video with the equipment they have. LOCA will leave it all wavy and looking like ass. It worked back in 2014 on rigid to rigid screens but they don't use it anymore. And never used it on curved screens. Stick to handing out flyers at Walmart.
ALUMNI2K dude id rather buy a brand new one whats wrong with you
Cool video😎😎😎😎😎😎😎😎😎
3:15 a perfect way to fuck up the LCD with that object.
I think that I need this fabulous equipment to repair my Galaxy S7.
My Phone had its first 5 minutes (out of the box) to be activated, when it fell of my hand to the ground cracking the front glass and I don't know if the LCD too.
The front glass is very cheaper to get for less than 15 dollars, but the LCD Digitizer cost over 250 dollars.
Maybe I need to take the insurance of my cellular company and pay only 200 dollars (deductible) to fix the front glass and the LCD digitizer, but the bad news is that with this insurance I just gonna to recieve a "refurbished Galaxy S7", instead a new one :(
Godofredo Torres that sucks xc
+Halmer Omali, that's correct. Maybe the cure (receiving the refurbished S7 from the insurance instead a new one) could be worst than the disease (just the cracked front glass, the LCD is ok). It's Not a good deal having those new cellphone, because when you've paid almost 750 or 800 dollars for that technology, you will get very angry when you see that in a minute your cellphone is gone to the ground and never will be the same again.
how many charges for this work
meu core 2 SM-355HN veio da Itália, mas nenhum rom tenho conseguido instalar nele fica o triangulo amarelo com exclamação e um monitor. Alguém já passou possou por isso e teve sucesso?
Samsung S7 edge broken combo but good condition but after frame separation black display. what's the problem , how to fix it
how do you seal it back to the ip68 rating?
You don't! I've heard that even when Samsung repairs the screens, the rating is gone.
Brandon Berrios no , when samsung does the repairs , everything goes back to normal , they re apply the seal that keeps the phone waterproof it's not that hard ...
I've heard differently from people who've actually had their screens replaced. They said that the seal is reapplied, but it is no longer certified IP68.
i had mine s7edge repaired 2 times. Still water resistant.
Hi, need your help in this.
My S7 display is broken and its touchscreen doesn't work.
I went to a place and they told me that to repair it they would must have to replace the battery as well. Can you tell if that's true, please?
Cause It doesn't make sense to me.
Thanks
Do you mean that the phone won't turn on with black screen?
REWA Technology Thanks for your reply.
The phone it's on, I can tell, because both back and tab buttons light up. The screen is black because hours after I dropped it, the black zones started spreading all over the screen until it covered it all. The battery had no problem.
You'd better replace a new screen.
my phone fell exactly on the volume up button and the button is jammed in. does it make sense to make somebody fix, or just usr it as is?
Replace the volume up button if you feel it is necessary.
Hi plz i have a problème with my galaxy s5 906L dont start and stey restar
Help me plz
Great videos, thank you! Keep up the good work!
Perfect job!
What name that freezer??
Brother, I will change the top glass of my mobile. How much will it cost? Model S7edge. I am saying from Bangladesh
Can you please make a video for solving the pink line problem in s7 edge
replace lcd
How can we buy these machines
My samsung galaxy s7 edge pink line problem how to solve thise problem
Great what he did but who has such maschines ans special stuff just for the s7 edge
Is the S7 edge OLED panel really that flexible? It looks like a black plastic foil damn!
but how come some oled panels cracked in flat Samsung phones?
only edge amoleds are on flexible surface. thats why are they flexible.
Saludos desde argentina...
so that where your phone goes when you put it in rice.. some Advanced Asian dimension
how do you deal with the waterproof issue?
Just add a layer of waterproof adhesive if you want to get back this function.
Please suggest how to buy in india
Where you are from???
How i contact you...??
My s7 Edge display is crashed on Upper top side
We are so sorry that we do not offer individual service at present.
the bottom third of my screen is unresponsive to touch after replacing the glass any advice
Justin Ellison its probably becouse the lcd benesth the glass is cracked. only way to repair it is to buy a new screen assembly.
can I send you broken lcd glasses from germany for repair and how much you will charge
Yes, we offer LCD refurbishing service. Could you please leave us your email or other contact info? Our sales will send the price and details to you soon.
or please contact our sales at email: frankynew@rewatechnology.com skype: Rewasales35s
Is it still water resistant after this?
It is not water resistant after refurbished