colaigor it's not that which is hard, it's getting the glass off, you smash it up and you just end up with smashed glass stuck to the phone instead. The glue is THAT bad even when smashed it still holds the glass on. So you end up with the back of the phone like a sheet of glass paper and you have to cut it off with razor blades, but end up getting new blades every 5 mins as they constantly blunt or snap. Is some nasty glue big time holding it on, like no other iPhone.
Seriously, though...you guys do amazing work and probably are responsible for thousands of pounds of e-waste staying out of landfills...keep up the good work & keep being green!
Motherf....iPhone X is a nightmare to repair. I work as a part-time mobile repair guy and have had bad repair experience with HTC and Apple. But this one takes it to whole another level
Justin Case never repairing an iphone X... Recommendation, just take it to apple.... Screen replacements are expensive when oled... Now they're for iphones... Yikes
Oh and another interesting thing to come up with would be an alternative to the "Horizon machine" - the machine that pairs the new Touch ID home button in a screen replacement to the phone (among other things).
I failed at 12:38 , It needs to be placed firstly the down side where the flex cable it is, after I notice that I immediatelly pushed the OLED to remove from the frame to attach down side firstly, but after I pushed I hear somecracking sound and after I test the screen to see it appeared several lines on the left sides, almost done, now I know for next time.
REWA can you put a camero into the pressure chamber and film the bubble removing process? I am curious to see the bubbles go away in low pressure. Probably from the sides
Wouldn't it be easier to remove the glass with a freeze machine and leave the amoled in the frame , and then re laminate the new glass to the amoled / frame assembly ?. Iv seen this done before with the Samsung edge screens and seems to work ok.
Such a dismantling method may lead to a problem with the screen and camera loop. there is another method, in my video there is an example iphone x and iphone xs
Casi el mismo proceso. Pero más difícil para la operación. También hemos hecho un video del iPhone XS Max Glass, reparación en nuestro canal. Puede consultar este enlace: https: //www.youtube.com/watch? V = ynyaseuL3RE & t
Amazing video, REWA! I have an idea - you should try to come up with a way to cheaply and accurately manufacture iPhone housings. Also you should come up with a way to print imei, serial, etc. numbers on those housings. Oh, and another great thing to try to come up with is a method to replacing just the back glass on iPhone 8/8+ and iPhone x. That would be great!
Hello, I took the glass off and everything, i get no image after it. The touch works because i can hear the phone unlock once I swipe up but I get no image. You think the OLED is done for?
The temperature we applied in the video is listed below in celsius for reference only. Frame Separating: 110℃ LCD Separating: 90℃ OCA Laminating: 55℃ Glass Laminating: 45℃
Thanks for the question. Our repair engineers usually have function tests on the screen after every refurbishing step to make sure everything is alright in this section,but in consideration of the video duration, the relatively unnecessary parts were edited out.
Enhance iPhone logic board repair skills with REWA Academy Online Courses ( Foundation, Handwork, Work Flow&Troubleshooting, etc.)
Check it now! > academy.rewa.tech
what temperature do you use?
REWA Technology how i can do?
I'm interesting
REWA Technology 国内怎么搜索，关注，有微信公众号么。
I am intersted i am training with us
You are teach me
Taking repair to whole next level...
Would love to see a successful only back glass repair
I also did one too, 7 hours total, complete nightmare, the only way is with a freeze machine. Any other way is not cost effective .
colaigor it's not that which is hard, it's getting the glass off, you smash it up and you just end up with smashed glass stuck to the phone instead. The glue is THAT bad even when smashed it still holds the glass on. So you end up with the back of the phone like a sheet of glass paper and you have to cut it off with razor blades, but end up getting new blades every 5 mins as they constantly blunt or snap. Is some nasty glue big time holding it on, like no other iPhone.
Iain Simpson is 7 hours cost effective?
Takes my techs no more than a couple hours now to do the back glass. Repetition, it gets easier
You Are The Best Repair And Tech Service in The World !!! You Must Open A Service Center in All Countries.. Good Luck
Hi actually I am also mobile repairing but when I see your technology I am really so satisfied for this video thanks guys
Seriously, though...you guys do amazing work and probably are responsible for thousands of pounds of e-waste staying out of landfills...keep up the good work & keep being green!
the removing process looks like a nightmare! great job done
Que buen trabajo maestro es usted inpecable en su trabajo.
Mi oregunta es cuanto salen las dos maquinas que usted utiliza para cambiar glash
Motherf....iPhone X is a nightmare to repair. I work as a part-time mobile repair guy and have had bad repair experience with HTC and Apple. But this one takes it to whole another level
Well, new solutions are always there.
Justin Case never repairing an iphone X... Recommendation, just take it to apple.... Screen replacements are expensive when oled... Now they're for iphones... Yikes
can only be done if you have the machines then.. thanks guys
using b 7000 to glue the frame will last? wouldnt the frame will start separate after using for long time
Good Job 🍷
Oh and another interesting thing to come up with would be an alternative to the "Horizon machine" - the machine that pairs the new Touch ID home button in a screen replacement to the phone (among other things).
Please what settings do you use for lamination, vacuum and debubble? Thanks
At REWA, everything is possible.
Also your English translations have improved significantly
Thanks. We will keep improving.
Hi. Is it better to use heat or a freezer to remove the glass?
I failed at 12:38 , It needs to be placed firstly the down side where the flex cable it is, after I notice that I immediatelly pushed the OLED to remove from the frame to attach down side firstly, but after I pushed I hear somecracking sound and after I test the screen to see it appeared several lines on the left sides, almost done, now I know for next time.
When separating the glass lens, how do you know the wire is going between the correct layers?
You can feel it
It is necessary to use very thin LCD cutting wire, and try to get close to the glass lens.
The feeling is important. XD
Sir i am very interseted your work for all models you r best in the world my dream visted your rewa teams and tech propar teaning
REWA can you put a camero into the pressure chamber and film the bubble removing process? I am curious to see the bubbles go away in low pressure. Probably from the sides
The camera must be in suuuuuuuuuuuuuuuuuuuuper-high quality.😂
maybe try a fake gopro that costs 20$ or something? what can you lose :D low pressure shouldn't harm the electronics
A go pro in a waterproof housing may work as they can be used for diving, so can stand crazy pressure
Wouldn't it be easier to remove the glass with a freeze machine and leave the amoled in the frame , and then re laminate the new glass to the amoled / frame assembly ?. Iv seen this done before with the Samsung edge screens and seems to work ok.
Such a dismantling method may lead to a problem with the screen and camera loop. there is another method, in my video there is an example iphone x and iphone xs
Where do you buy all those equipment? Wow, awesome though
I wonder if you could use cutting wire to remove the bezel 🤔🤔
Not without damaging the flex cable. Too many obstructions in the way, as opposed to the glass side which has none.
can you tell its been replaced and is the bezel fatter then the oem bezel
hi Rewa Technology, can you change the any camera smartphone?
What temperature did you use to remove the glass
Nice how much it will cost?
works that glass even if you do in the water?
My screenglass is cracked in bottom right .Can you replace it for me also.
And how much does it cost including shipping ..
Es el mismo sistema para extraer el glass del iphone xs max?
Casi el mismo proceso. Pero más difícil para la operación. También hemos hecho un video del iPhone XS Max Glass, reparación en nuestro canal. Puede consultar este enlace: https: //www.youtube.com/watch? V = ynyaseuL3RE & t
Felicidades y gracias por compartir sus trabajos.
Okay, how much does this procedure cost?
After i remove the frame middle of the touch not working. If i change the touch layer it will work or not?
how many degree you remove bezel
Amazing video, REWA!
I have an idea - you should try to come up with a way to cheaply and accurately manufacture iPhone housings. Also you should come up with a way to print imei, serial, etc. numbers on those housings.
Oh, and another great thing to try to come up with is a method to replacing just the back glass on iPhone 8/8+ and iPhone x. That would be great!
Thanks for the suggestions. It's quite enlightening. We have passed these to our Technical Department.
Hello, I took the glass off and everything, i get no image after it. The touch works because i can hear the phone unlock once I swipe up but I get no image. You think the OLED is done for?
Hi, what is the glue cleaner? Isopropyl or something with acetone? Thank you
what a surgeon 😀
Is Face ID work after glass change
what is the liquid to remove the bezel?
u can use lighter fluid
Does face jd still work?
can i use normal laminating machine like AK-pro? OLED must use LED laminating machine?
Как правильно отполировать iPhone и удалить мелкие царапины?
How to convince parents to buy LCD refurbishment tools?
Now i know what i want to be, I want to be a part of your team!
Increíble trabajo
I want to change my glass for iphone x please help to change ...
Which temperature did you use?
The temperature we applied in the video is listed below in celsius for reference only. Frame Separating: 110℃
LCD Separating: 90℃
OCA Laminating: 55℃
Glass Laminating: 45℃
REWA Technology thank you
Great job
شكرا جزيلا لك حقيقة انت لطيفة جدا وعملك متقن
ممكن كيف اشتري عندكم
Theoretically you could remove the notch on the top of the display when using a slightly changed screen glas! :P
you will need 360 degree roratring lcd separate hot plate machine
Do it become LCD display instead of OLED display after glass is replace and get repair??
@Mihirang umrigar It's still the OLED display.
where can i get this done because apples tripping talking about they cant just replace the glass 😒
Gracias
True Masters!
Why on the result phoneapp is on the left but on the last test before laminate, this one was moved on the right..?
Thanks for the question. Our repair engineers usually have function tests on the screen after every refurbishing step to make sure everything is alright in this section,but in consideration of the video duration, the relatively unnecessary parts were edited out.
:) ok
Hey REWA, did you ever try to separate the glass with a freezer? Like those OLEDs of Samsung.
By the way - great job!
We haven't tried with freezer yet, but this message has been passed to our Technical Dept. We will keep try trying and improving.
holy shit you actually did it! well done
very professional
Well done
Would like to know the bgm.
Love you guys your video is awesome so satisfied it's really amazing thanks for your lovely videos
Thanks for the comments. We will keep on going.
REWA Technology you always welcome
Sir small help ??
What’s that blue belt/wire on your hand ?
It's anti-static wrist strap.
I need sent for repair how
It’s still against waterproof this iPhone??
It will lose the waterproof function after disassembled, but this function can be partially recovered by applying a layer of water resistant adhesive.
I phone x display glass successfully sir
I believe you have replaced this phone glass before right???am I right???
The glass have not been replaced before.
Verry nice
Просто нет слов.... Супер
So just get a new screen instead of replacing glass? This looks difficult
Thanks for the vid
Can I send you one iPhone X screen to refurbish? If so how much would it cost?
We are so sorry that we do not offer individual service at present.
anyone got spare laminating machine?
Apple 4s new board how to price
iPhone 4S motherboard new press rupi
We are so sorry that we do not offer logic board at present.
Super amazing
Thanks.
Amazing 👍🏻👍🏻👍🏻📲📲📲
diz skillz!
nice
Are bhai meri to 3 display tut gay i
Need a robot, i like to know the machinery process involved to build the screen on reverse.
Suparrrrrrr
Very nice 👌🏻👌🏻👌🏻👌🏻👍🏻
Why you using 2 machine. There are Automatic laminating and bubble removing machines. Why you use old method to do this.
Cool video😎😎😎😎😎😎😎😎😎
Thanks.
number one
Thanks.
best!
Can you repair my phone please sir it’s to much cost in india
Very good
muito bom!!1
My iPhone 4s is not working
shantanu joshi Drop it 😂😂
B7000 le yapistirman bütün isciligi bitirdi
I like this music
What’s that in your wrist?
to prevent static shock
What's with the coke nail
Hola d(-_-)b, has el video otravez. Saludos
the no talk channel !
thats how china looks like.
sir my babble is not going