Thank you for ripping one open. Saves me the trouble. Glad to hear you're at 50%. Your charging light will change from red to green when you reach 100%. 😁
I have triple22Ahx2+26AH Ebike 48v28ah controller. Under the seat i find they have double equalizer duel battery Yolin 48v30AH .. after 6 month only one battery is work the 2 other places is disabled... I open under the seat i see have problem with my 2 equalizer!!! Do you think it's not safety to use double( equalizer duel battery) for triple battery ebike ?
Hello , it’s protector to parallel more then 4 batteries at a time I have about 12 of them and work great but the ones I have look different that I got from Amazon
Jag hade mer än gärna laddat upp en video på min kanal, om jag fått nöjet att få göra det. Jag har haft två batterier (37v 14,6ah) utan bms, parallellt med två billiga kopplingar med tre xc60 (2hane1hona) så jag har en koppling över där jag laddar båda batterier ifrån samtidigt. Har gjort det i två år utan problem. Dem var på exakt samms volt när dem sammankopplades och har inte undersökt om där är någon förändring. Hade varit intressant att göra en gemförrelse video.
I have 3 packs identical i guessed if i parallel them and use the correct bms its gotta be safe as its just like building a pack but only joining from the terminals would that be a problem do u think
Inrush current if the batteries have different voltages. One battery will also be charging the other VIA the discharging connector and if not both batteries have BMS that support same wire C/D it can lead to BMS failure or possiblly battery fire or overcharged cells. If the voltage is very different then uncontrolled charging can happen very fast and make the mosfets explode.
You didn't have to open the part to see that it was fake, you just need to read the description, it says both batteries should have the same charging voltage and both batteries should be off when you connect them, first of all, not all batteries have an on & off switch, secondly, what the part then makes sense compared to a simple Y-cable and then, still so expensive, there is also a so-called Dex2 or Dex3 adapter, where it doesn't matter what voltage which battery has and also that you can charge both at the same time via the adapter, but it costs from: 153 dollars is also rubbish for such a high price
I'm thinking of getting a datex device, any thoughts. Currently have a single 48 volt battery, thinking of getting a second 48 volt, or just upgrade to a 52 volt system.
You need to get yourself a small rotary tool so you can easily just cut the cases off with a high degree of control (less than a minute and MUCH safer than what you did)
It looks to me to be an ideal diode circuit. I use the ones made for solar panels for each home made battery. This is probably the same thing, but has two channels instead of one. Greetings from Dalarna
Maybe usefull to note is that you can not really use two battery's to power something twice as powerfull in alle occasions, as they only work together if they are about the same state of charge. Ofcourse when a big load makes the voltage drop the second will kick in, but the load wont be divided equally
If you want to snap some close ups of the PCBA with the wires snipped I can reverse engineer that for you. If there isn't any marking on those fets I could make some assumptions. Have you got a contact email? In theory this could allow for a 13s1p (or more parallel obviously) extention (for 48V) system and it would split the load between the two batteries. I don't think you would necessarily wait for one battery to drain before it switches
i thing your videos are great coz you expose them so expesive to buy not worth for the money to buy it if you can figure it out how its done i know you will share it to others to help
In fact I'd be really interested to know if this dual battery adapter really stops any cross-current flowing between two batteries with unequal state of charge (as ideal diodes would do) or if it just limits that cross-current down to "acceptable levels" (e.g. 1C as suggested in this other video for a similar module: th-cam.com/video/UUwUOcNe2-Q/w-d-xo.html). Would be great if you can test that in your upcoming video @Batteridoktorn
Just use the old way works for me Build battery long time as voltage and the amp hours are the same good bms are safe Dont charge and plug charged battery separately allow 2 hours that the battery cool down 2a charge for long life
they are safe, just stops 1 battery charging the other and discharge. So you can use 2 batteries on one bike. As for Voltage thats a given as batteries have to be the same as the bike. If you use a Y-cable and 1 battery is 48.2 v and 1 is 48.8v then the higher volt battery will charge the lower volt battery. This stops that and sends all current to the controller.
@@MRMARKWIDDOWS20 Hello..so is good to get one? I got a two 60v batteries One 20ah and the other 25ah...Should I used this device to wire them in parallel? Even though a difference of 5ah?
@@ari1234. I Personally am very happy with it. Paid £48 for it at the time. Had 2 batteries one 54v 17ah and one 54v 20ah and the bigger battery was draining far more quickly powering my ebike and trying to charge the smaller battery at the same time. I was using a y-cable but then this stopped all that. Personal bonus had a bike thief stick a screwdriver in the external battery charge port and blow the battery and luckily this stopped the charge blowing my controller and other battery. Costed me a bms and fuse for 1 battery.
is it safe or I can just make my batteries parallel when they are in the same voltage and no need fot this extra risk circuit?
Thank you for ripping one open. Saves me the trouble. Glad to hear you're at 50%. Your charging light will change from red to green when you reach 100%. 😁
I have triple22Ahx2+26AH Ebike 48v28ah controller. Under the seat i find they have double equalizer duel battery Yolin 48v30AH .. after 6 month only one battery is work the 2 other places is disabled... I open under the seat i see have problem with my 2 equalizer!!! Do you think it's not safety to use double( equalizer duel battery) for triple battery ebike ?
Keep up great work
Love this 😊
Hi, could you please tell me the name of the Mosfets in the circuit?
What is the cap can hold 100v?
ebike delivery drivers are looking for chaining batteries for more distance.
Thanks, I've been wanting to see this for a few years now. When this device was new, people were selling these for +$100-$200.
Do they work alright or are they junk?
They do work, used one for 1 year, no problem@@russellm7530
I just bought one. If I find ya again, I'll letchya know. ;)@@russellm7530
Hello , it’s protector to parallel more then 4 batteries at a time I have about 12 of them and work great but the ones I have look different that I got from Amazon
So for dual battery not needed
Yes you need
i have a question, how about regenerative braking system on e-scooter you think is it gonna work?
It'll prevent regen from functioning, since each battery is only allowed to discharge
Would this be safer to use than a bare basic xt60 two into one parallel connector adapter?
No
Why not?
How is yours working out? I have one for my 36v grocery getter and haven't had an issue yet. 8 months so far.
@@paulmryglod4802 I have a 100amp one, was running 60amps at one point, now 90. So far so good.
Jag hade mer än gärna laddat upp en video på min kanal, om jag fått nöjet att få göra det. Jag har haft två batterier (37v 14,6ah) utan bms, parallellt med två billiga kopplingar med tre xc60 (2hane1hona) så jag har en koppling över där jag laddar båda batterier ifrån samtidigt. Har gjort det i två år utan problem. Dem var på exakt samms volt när dem sammankopplades och har inte undersökt om där är någon förändring. Hade varit intressant att göra en gemförrelse video.
I've been twining battery packsfor years with the correct gage wire!
I have 3 packs identical i guessed if i parallel them and use the correct bms its gotta be safe as its just like building a pack but only joining from the terminals would that be a problem do u think
Thank you the making and sharing of this informative and funny video! FaaaarK! 😂
I used this to connect my 2 52v 20a batteries to my single 1000w motor using a 33a controller and it shorted my bike now it wont turn on any advice?
Fried bms
Can I ask why it is a problem to connect two batteries in parallel
Inrush current if the batteries have different voltages. One battery will also be charging the other VIA the discharging connector and if not both batteries have BMS that support same wire C/D it can lead to BMS failure or possiblly battery fire or overcharged cells. If the voltage is very different then uncontrolled charging can happen very fast and make the mosfets explode.
Is called an Ideal Diode
It seems very well made!
An AB battery switch would work well and be much cheaper.
Any circuit can fail at anytime.
but its very hard to find a switch that is rated for a high enough current. thats why i use a battery kill switch
They also have an adapter like that with a charging plug built in. Think that's the other hole
You didn't have to open the part to see that it was fake, you just need to read the description, it says both batteries should have the same charging voltage and both batteries should be off when you connect them, first of all, not all batteries have an on & off switch, secondly, what the part then makes sense compared to a simple Y-cable and then, still so expensive, there is also a so-called Dex2 or Dex3 adapter, where it doesn't matter what voltage which battery has and also that you can charge both at the same time via the adapter, but it costs from: 153 dollars is also rubbish for such a high price
I'm thinking of getting a datex device, any thoughts. Currently have a single 48 volt battery, thinking of getting a second 48 volt, or just upgrade to a 52 volt system.
You need to get yourself a small rotary tool so you can easily just cut the cases off with a high degree of control (less than a minute and MUCH safer than what you did)
It looks to me to be an ideal diode circuit. I use the ones made for solar panels for each home made battery. This is probably the same thing, but has two channels instead of one. Greetings from Dalarna
Maybe usefull to note is that you can not really use two battery's to power something twice as powerfull in alle occasions, as they only work together if they are about the same state of charge. Ofcourse when a big load makes the voltage drop the second will kick in, but the load wont be divided equally
I was expecting a LTC4355 Positive High Voltage Ideal Diode-OR chip on the board to control the fets.
If you want to snap some close ups of the PCBA with the wires snipped I can reverse engineer that for you.
If there isn't any marking on those fets I could make some assumptions.
Have you got a contact email?
In theory this could allow for a 13s1p (or more parallel obviously) extention (for 48V) system and it would split the load between the two batteries. I don't think you would necessarily wait for one battery to drain before it switches
Did you got detailed pictures?
Hello I'm interested, how can I reach you via email?
i thing your videos are great coz you expose them so expesive to buy not worth for the money to buy it if you can figure it out how its done i know you will share it to others to help
Good or not to use?
New test comming soon when we compare it to DateX2.
In fact I'd be really interested to know if this dual battery adapter really stops any cross-current flowing between two batteries with unequal state of charge (as ideal diodes would do) or if it just limits that cross-current down to "acceptable levels" (e.g. 1C as suggested in this other video for a similar module: th-cam.com/video/UUwUOcNe2-Q/w-d-xo.html). Would be great if you can test that in your upcoming video @Batteridoktorn
Bro y did u made me watch u unscrew the screws
Bought one of these , had an electrician friend install it on dual battery setip, fried my controller , junk
Hmm would you think it's safe?
Just use the old way works for me
Build battery long time as voltage and the amp hours are the same good bms are safe
Dont charge and plug charged battery separately allow 2 hours that the battery cool down 2a charge for long life
they are safe, just stops 1 battery charging the other and discharge. So you can use 2 batteries on one bike. As for Voltage thats a given as batteries have to be the same as the bike. If you use a Y-cable and 1 battery is 48.2 v and 1 is 48.8v then the higher volt battery will charge the lower volt battery. This stops that and sends all current to the controller.
What is the old way,please.
@@MRMARKWIDDOWS20 Hello..so is good to get one? I got a two 60v batteries One 20ah and the other 25ah...Should I used this device to wire them in parallel? Even though a difference of 5ah?
@@ari1234. I Personally am very happy with it. Paid £48 for it at the time. Had 2 batteries one 54v 17ah and one 54v 20ah and the bigger battery was draining far more quickly powering my ebike and trying to charge the smaller battery at the same time. I was using a y-cable but then this stopped all that. Personal bonus had a bike thief stick a screwdriver in the external battery charge port and blow the battery and luckily this stopped the charge blowing my controller and other battery. Costed me a bms and fuse for 1 battery.
Don't take up brain surgery. But funny as anything.
LOL!
death
?