Thanks Neil, just replaced my cables (first work on any car besides an oil change) and it was a breeze! My set of cables also came with new metal brackets, so no need for pliers to keep the old one from bending
Good guide! Any chance you could do a tutorial on replacing the rear subframe on a 147? This is something I'm looking to do soon but a bit scared to tackle it
Hello Neil, my antenna radio is broken, only got the base without the nut, the one goes inside the base, my car is an alfa romeo 156 sedan, and no get a clue, how to reach to replace, any advice or help. Thank you Neil.
Great tutorial! Some advice please?: I'm missing a bracket on my 147 on the exhaust side. I think it's a metal clip that's riveted onto the heat-shield. Is this a common thing to disappear? It's not like the 147 driver-side plastic clip on the fuel tank strap (intact) as that's the same as the 156 on both sides in your vid...
I have an aftermarket novitec handbrake handle for my 147,no instructions with it & it's doesn't slide over the rubber handle. Do I need to cut off the rubber handle?
Neil, sorry for going off-topic, but I have to ask - do you have a video of removing the trim where the rear passenger's seat belts come from? If not, any tips for tackling the job and directions? Car is a 147 pre-facelift. Thanks!
my handbrake cable broke a couple of weeks ago when I swapped new tires :) this video came in perfect time :)
good stuff.
Thanks Neil, just replaced my cables (first work on any car besides an oil change) and it was a breeze! My set of cables also came with new metal brackets, so no need for pliers to keep the old one from bending
Good stuff.
Good stuff Neil - I may even be able to do that now!
I'm sure you could
Thank you so much!!!!! I need to replace my rear left cable and you send this today!!!!!
Good stuff.
Neil sugestions for another video is brake problems like rear caliper pad replacement and brake bleeding with ABS to get a good firm pedal
Excellent video! Thanks, need to have this done on my wife's car.... will order both cables as you have suggested.... cheers man
Just did the replacement and thanks to your video instructions all worked out perfectly. Thanks and keep up the good work! 💪🤝
good stuff. please share the video if it helped you out. thanks
You’re a mind reader Neil I was only wondering the other day if we would get a vid on this 👍👍
And finally two years later I got round to replacing the handbrake cables today 😀
Good guide! Any chance you could do a tutorial on replacing the rear subframe on a 147? This is something I'm looking to do soon but a bit scared to tackle it
Thanks Neil just swapped mine out perfect video.
Hello Neil, my antenna radio is broken, only got the base without the nut, the one goes inside the base, my car is an alfa romeo 156 sedan, and no get a clue, how to reach to replace, any advice or help. Thank you Neil.
Excellent tutorial. My greetings from Greece
Hi welcome to the channel.
today i replaced the broken cable and thanks to you,everything went perfect
@@souloukex6680 good stuff
Great tutorial! Some advice please?: I'm missing a bracket on my 147 on the exhaust side.
I think it's a metal clip that's riveted onto the heat-shield.
Is this a common thing to disappear?
It's not like the 147 driver-side plastic clip on the fuel tank strap (intact) as that's the same as the 156 on both sides in your vid...
After adjusting 13mm handbrake nut to get car to hold when in gear you Didn’t check if after releasing handbrake both wheels spun freely
I have an aftermarket novitec handbrake handle for my 147,no instructions with it & it's doesn't slide over the rubber handle. Do I need to cut off the rubber handle?
slides over then tightened up with Allen head screws normally.
@@ItaliaAutos thanks! I can't get it over the current original rubber handle for the life of me....
nice good guide thanks :)
Ok..how different is it on the 166?
if you have the adjusted in the same place its the same.
Nice one.
Neil, sorry for going off-topic, but I have to ask - do you have a video of removing the trim where the rear passenger's seat belts come from? If not, any tips for tackling the job and directions? Car is a 147 pre-facelift. Thanks!
You will need a trim clip removal tool. There's about 5 screws to.
Italia Autos Great, got a tool from AliExpress just for that a while ago 😄. Thanks!
Great vid 👍🏼 does the 147 have a handbrake warning light on dash? I can pull away with handbrake on and no light comes up
There is a connector on the handbrake
Italia Autos thanks for the reply, I’ll try find it
Connection on the handbrake itself
My handbrake has started seizing. Will replacement of the cables fix that?
Possible but sent know unless I can see it. 👍
@@ItaliaAutosI would drive up to you but I live 2k miles away :D I''ll give it a go then per this video. Thanks as always! Cheers!
Just to report, cable replacement fixed my problem! :) Bought ate cables and all is well and pretty easy to replace if you have a pit (or a lift).
How to replace fuel filter in fiat coupe 1999 2.0, 20V?
It's just 3 Philips screws .
It is in the fuel tank?
@@daliborstolic4160 sorry miss read it. Thought you meant filler cap.
Yep a Nice one. .belts 👍oké and the sound walking. .💪👅👍
Is this the same on the 159 please ?
Nope
@@ItaliaAutos ah ok, gutted, i assume it’s harder on the 159
Its always a suprise what the do..thise one 😘😚💪👅👄👍
Just buy oké 😘 a 2006 147 the nice one 123 klm 😉 a 2.0 fuck she wants. .haha💪👍