Love the videos. Raced my '22 300 Race this weekend at the Awesome TSCEC Sandwinder Enduro. I still have some dailing in to do but love seeing all the Beta videos.
Hi Gerard. I'm looking for a video on removing the handle bar multi function switch for lights etc on a Australian delivered 2023 390RR race. edition I just want the head light to run on low beam. Nothing else. I'm sure I remember you talking about it , but cant find the video. thanks J
Good evening, thanks for watching our video! There is no plug in the race harness for the lights on the newer 2020+ models.. you would either have to run a power wire to the battery or go back to the main harness for the weekend. Thanks, Jared
I was just going through my wiring harness last week, thinking I should clean it up with an RX wiring kit. Crazy this video just popped up. Do you have an estimate on how much weight savings there are between each harness? SUBSCRIBED!
I would assume the weight savings is around a few pounds? We are removing so much including the headlight, tail light, whole instrument panel, speedo sensor, brake sensors... for us its more the simplicity of it.
Good Afternoon, you are more than welcome to leave that TPS sensor in the carb. We remove it for cosmetics and to remove anything that is not needed. Keep in mind that we offer discounts on Beta parts/ accessories if you ever find yourself in need! Thanks, Jared
Hi just for information, I've mounted a racing harness on my new 2022 Beta factory edition. The only problem is that the map switch doesn't light up.... What do you think it could be. Probably the wire is damaged anywhere or it not correctly mounted in the cdi attach. Do you have any suggestions on how I can fix it. Thanks!
Good Morning, thank you for watching our videos! That is odd that it no longer lights up. I would check the connectors to make sure the pins are not bent over and failing to make a connection. Does everything else work properly? Thanks, Jared
@@3SeasRecreation Thank you for the answer I resolved the problem, and it was exactly what you said, the connectors were a little bend but now everything works fine! So a big thank to you!
Good morning, yep its exactly the same! Glad it helped ya out! Keep in mind we offer discounts on Beta parts so before you buy from BetaUSA . Give give me a shout!! Thanks, Jared
Good Afternoon, the weight difference never really seems to add up to much. Mainly because we end up adding radiator braces, rotor guard, hand guards... those things eat up the savings we gain with the things we remove. Enjoy The Ride, Jared
Good evening, yep they are right in the description of the video. Keep in mind that if you are in the USA I offer discounts on oem Beta parts and most orders qualify for free shipping! Our phone number is (716) 753-2628 if you get interested. Thanks, Jared
For those of us that race we do not need anything other than a start button/ kill switch. It makes more sense to remove the stock harness to eliminate anything that is not needed. Enjoy The Ride, Jared
Did you leave the map switch off the bike after installing this harness? If you do remove the map switch does the bike just default to the more aggressive setting? Thanks.
Good Evening, that is a good question. NO it will not work. The race harness does not have the plug in's required to run the OI system or even the cooling fan for that matter. Enjoy the ride, Jared
Love the videos. Raced my '22 300 Race this weekend at the Awesome TSCEC Sandwinder Enduro. I still have some dailing in to do but love seeing all the Beta videos.
Thanks for the comment! We have been doing Beta stuff for so long that we decided we would start to film some of it!
Another very clear and informative video - thanks!
Hi Gerard. I'm looking for a video on removing the handle bar multi function switch for lights etc on a Australian delivered 2023 390RR race. edition I just want the head light to run on low beam. Nothing else. I'm sure I remember you talking about it , but cant find the video. thanks J
Hey James, yes ill grab that video and tag it here in the comment! Enjoy the ride, Jared
th-cam.com/video/1223sk1Ws-Y/w-d-xo.html
Will this harness work on a 2024 300 Xtrainer? If so, how do i order one from you? Thanks
Great videos, very helpful for 300 RR. Could you tell the part no. for the racing loom, hoping I can get one in the UK. Thanks for any help.
So this is the part number that we use here in the USA. Hopefully it helps, thanks for watching! : Beta OEM 2020+ Race Wire Loom Kit - AB-22050-2
@@3SeasRecreation Thank you.
My beta race harness came with a light switch/kill switch combo, what are you using on this bike? Is there a plug and play kill switch option? Thanks
is there a way to still run a light with the race harness? say for the 24hr races or would you have to swap back to the stock harness?
Good evening, thanks for watching our video! There is no plug in the race harness for the lights on the newer 2020+ models.. you would either have to run a power wire to the battery or go back to the main harness for the weekend. Thanks, Jared
Cant get this race wire loom in Sweden. Do you ship to Sweden ?
Good Morning! Thanks for following our channel from Sweden! Unfortunately no we do not ship outside of the USA... Enjoy The Ride, Jared
I was just going through my wiring harness last week, thinking I should clean it up with an RX wiring kit. Crazy this video just popped up. Do you have an estimate on how much weight savings there are between each harness?
SUBSCRIBED!
I would assume the weight savings is around a few pounds? We are removing so much including the headlight, tail light, whole instrument panel, speedo sensor, brake sensors... for us its more the simplicity of it.
Thanks for subscribing!!!
@@3SeasRecreation Yeah I imagine this would get the weight close to that of the RX300. Thanks for the info!
Hi I just wanted to ask, can i just seal the throttle sensor of the carb with a tape and leave it there or do I have to remove something?
Good Afternoon, you are more than welcome to leave that TPS sensor in the carb. We remove it for cosmetics and to remove anything that is not needed. Keep in mind that we offer discounts on Beta parts/ accessories if you ever find yourself in need! Thanks, Jared
Hi just for information, I've mounted a racing harness on my new 2022 Beta factory edition. The only problem is that the map switch doesn't light up.... What do you think it could be. Probably the wire is damaged anywhere or it not correctly mounted in the cdi attach. Do you have any suggestions on how I can fix it.
Thanks!
Good Morning, thank you for watching our videos! That is odd that it no longer lights up. I would check the connectors to make sure the pins are not bent over and failing to make a connection. Does everything else work properly? Thanks, Jared
@@3SeasRecreation Thank you for the answer I resolved the problem, and it was exactly what you said, the connectors were a little bend but now everything works fine! So a big thank to you!
hey there, could you please tell me if the banjo bolt for the rear is the same part that you used?
Good morning, yep its exactly the same! Glad it helped ya out! Keep in mind we offer discounts on Beta parts so before you buy from BetaUSA . Give give me a shout!! Thanks, Jared
Thank you, Jared, I would have ordered from you if I was in the States. I’m in Europe though. Your videos help a lot!
Weight difference? From stock parts removed and Race harness
Good Afternoon, the weight difference never really seems to add up to much. Mainly because we end up adding radiator braces, rotor guard, hand guards... those things eat up the savings we gain with the things we remove. Enjoy The Ride, Jared
Do you happen to have the part number for the race wire loom kit?
Good evening, yep they are right in the description of the video. Keep in mind that if you are in the USA I offer discounts on oem Beta parts and most orders qualify for free shipping! Our phone number is (716) 753-2628 if you get interested. Thanks, Jared
@@3SeasRecreation great thanks! I enjoy your videos! Im in Canada though
Will this kit work on an Xtrainer?
Good Morning, no there is not a race wire harness for the XTrainer model. Enjoy The Ride, Jared
Why remove the stock harness?
For those of us that race we do not need anything other than a start button/ kill switch. It makes more sense to remove the stock harness to eliminate anything that is not needed. Enjoy The Ride, Jared
Can you attach a tachometer or a radiator fan with this harness???
Hey, here is my race harness and cooling fan video:
th-cam.com/video/h4f5qPuEFBs/w-d-xo.html
Did you leave the map switch off the bike after installing this harness? If you do remove the map switch does the bike just default to the more aggressive setting? Thanks.
Good Evening, yep we leave the map switch off and yep it goes to Standard/ Aggressive map. Enjoy The Ride, Jared
Would the race harness work on the oil injection bikes?
Good Evening, that is a good question. NO it will not work. The race harness does not have the plug in's required to run the OI system or even the cooling fan for that matter. Enjoy the ride, Jared