This 👆 It'd quite easy, for a fabricater/welder to remove that spot welded plate. I'd also put a thick plate on the other of the Chassis rail👍 Whilst your at it, do the other side you'll regret later😅
That diff yoke you took off will have a bearing tolerance so don't just impact the nut back on when the new seal comes... you will wear the pinion bearing out of its too tight
the jobs you do on the driveway & what you did outside of your old place some people wouldn't attempt on a ramp ! hats off to you Lee you aint scared 🙌🙌 and I have to say thank you for taking the time to have a pic with me last Sunday at CCD 😀Legend
I'd deffo be getting a plate in there, washer will be done by the first drift day. Might be better getting the plate put on the other side so the arm can still fit back in.
Best way to deal with them clips is find a socket that fits snug over spring collar to push them in and pull the cable out from the other side. Also that diff looked like it had way to much back lash so its more than likely been wearing out the pinion and ring gear under harsh acceleration, This would also put strain on the pinion bearing, the movement in the bearing will strecth the pinion seal rubber causing the leak. I would get it all checked for peace of mind. Other wise you will just be blowing through seals like crazy.
I would bracket all 4 sides while you have the opportunity,also diff seal their should be a number on th seal which are universal descriptions You can then order them from i places like simply bearings or Cole Palmer. Brilliant video by the way😵💫😈😊
Hey lee I saw you at the Kendal car show just to say my brother really loved seeing you but was just to shy to say hi so just to let you know we say your mustang (the one you had in the video!) and we loved seeing ya there!
I think the best solution is to make a sleeve through the holes, a washer is a good idea, but the welding can make rust and weaken the frame if you do a sleeve through the hole just like the bush has leaf going through it that’s it. Do the job for you
I think it’s time to invest in a mobile car lift / car scissor lift they would be perfect for you with the limited space you have and I don’t no if your aware but you can get rollout awnings that would fit perfect above the garage door 😂 . Great content tho reminds me of when I was 17 😱 Jokes been a sub for ages just trying to help with not a lot of cost
Yes Lee Another Headache to gain with more Problems on the Mustang 😱 I Swear every Car you've brought recently is either Shit,Stupid or Really Difficult To Work on 🤔 But I'm Still Loving Your Content after many years of watching you since the Clio Days with what you do the builds & Projects you Make and every Headache that Comes with it 😂 Keep up the sick content as always I love it ❤
As you still live with your parents !!!! do they not give you wrong for getting oil all over the drive way that they worked hard to pay for ? Just wondered
You’ll need a new diff mate if I remeber the damages to the crown wheel when you had it welded looks like the bearings had it causing that damage and that will have caused the seal to leak, a new seal will only fix it temporarily
Don't weld a washer in its will do the same thing again. Weld in a semi captive hardened steel nut that's same thread as the bolt for your trailing arm. Fixed forever ❤
I wouldn't weld a washer on it, I'd plate it with some nice thick steel and it ain't gonna happen again
This 👆
It'd quite easy, for a fabricater/welder to remove that spot welded plate. I'd also put a thick plate on the other of the Chassis rail👍
Whilst your at it, do the other side you'll regret later😅
@@markwalton8644wanna do it for me?😂
@@itsleelockwood i agree do a plate do it on all holes then your coverd on both sides
+ to this
Sod these guys 😂 just jb weld it bro 😂
100k Congrats LL!
That diff yoke you took off will have a bearing tolerance so don't just impact the nut back on when the new seal comes... you will wear the pinion bearing out of its too tight
I had to send it
@@itsleelockwood oh well🤣🤣
Excellent content. Enjoy how you show the job being done with the issues you encounter.
At least there is no rust!
the jobs you do on the driveway & what you did outside of your old place some people wouldn't attempt on a ramp ! hats off to you Lee you aint scared 🙌🙌 and I have to say thank you for taking the time to have a pic with me last Sunday at CCD 😀Legend
Shoulders looking juicey Lee 👀 💪🏻
I'd deffo be getting a plate in there, washer will be done by the first drift day.
Might be better getting the plate put on the other side so the arm can still fit back in.
Still loving your content after many years regardless of what you do but please do the dashboard on the mustang 🙏🤞🏻😂
It’s coming! I just need to rewire everything before I do it hahah
Yes, dashboard 😅🎉
Get some 5mm plate and drill the right size hole in it, a washer wont last long especially drifting
another quality video young man 👍👍👍
Best way to deal with them clips is find a socket that fits snug over spring collar to push them in and pull the cable out from the other side.
Also that diff looked like it had way to much back lash so its more than likely been wearing out the pinion and ring gear under harsh acceleration, This would also put strain on the pinion bearing, the movement in the bearing will strecth the pinion seal rubber causing the leak. I would get it all checked for peace of mind. Other wise you will just be blowing through seals like crazy.
I would bracket all 4 sides while you have the opportunity,also diff seal their should be a number on th seal which are universal descriptions
You can then order them from i places like simply bearings or Cole Palmer. Brilliant video by the way😵💫😈😊
Another gr8 video. I saw you today (friday) driving down the east lancs @ haydock Island, I heard that jag before I saw you 😂 Car looks stunning.
Great work Lee, well sussed out mate❤👌🤟🤘
Hey lee I saw you at the Kendal car show just to say my brother really loved seeing you but was just to shy to say hi so just to let you know we say your mustang (the one you had in the video!) and we loved seeing ya there!
Should have said hello!
Sorry mate!
I would’ve but I was to focused on my food xD
If there's enough room. Open the holes up in the chassis and weld some shoulder bushes in place
Don’t be defeated mate keep up the good work, the previous owner has bodged that car like crazy
Shes giving us lots of content that stang 😊 Great channel Lee always a great watch 😎
Another Amazing Vlogs ever 👌
Great video lee 🙂👍
I think the best solution is to make a sleeve through the holes, a washer is a good idea, but the welding can make rust and weaken the frame if you do a sleeve through the hole just like the bush has leaf going through it that’s it. Do the job for you
Push a socket over the cable clips too press the tabs in,,,,your welcome 😂
The washers would have to be on the outside or there going to reduce the width and the arm wont fit back in !!!
I think it’s time to invest in a mobile car lift / car scissor lift they would be perfect for you with the limited space you have and I don’t no if your aware but you can get rollout awnings that would fit perfect above the garage door 😂 . Great content tho reminds me of when I was 17 😱
Jokes been a sub for ages just trying to help with not a lot of cost
Yes Lee Another Headache to gain with more Problems on the Mustang 😱
I Swear every Car you've brought recently is either Shit,Stupid or Really Difficult To Work on 🤔 But I'm Still Loving Your Content after many years of watching you since the Clio Days with what you do the builds & Projects you Make and every Headache that Comes with it 😂
Keep up the sick content as always I love it ❤
As you still live with your parents !!!! do they not give you wrong for getting oil all over the drive way that they worked hard to pay for ? Just wondered
You’ll need a new diff mate if I remeber the damages to the crown wheel when you had it welded looks like the bearings had it causing that damage and that will have caused the seal to leak, a new seal will only fix it temporarily
Makes sense, will see how we get on
Im sure it shouldn’t be resting on the threads of the bolt- thats why it has a shoulder. Get better bolts
I thought about this too.. but then how would it tighten down if the threads go further?😂
Correct bro
Mothers E46 has been sat on the drive since all the junk Lee has bought since the Astra.
Don't weld a washer in its will do the same thing again.
Weld in a semi captive hardened steel nut that's same thread as the bolt for your trailing arm. Fixed forever ❤
Good idea!
If the diff is flexing the seal on the diff will be Fubar mate. No designed for flex.
Dont you need a mechanical handbrake for the MOT?
Never expected that an old Land Rover would be more relaible then a Mustang 😀
What happened to the bora?
Love the content but what's happening with the road to 10k think with the cars the bora
Wait what happened to the 190E?
Maybe a bigger bolt / smaller bushing
Great video
Gassed to see you at Ford Fair if you make it bud 🤣🤞
I’ll be there!!
Hello Lee,,, what's your average daily diet
Eat as much as I can
Could it not be something do to when the bmw bumped into you? It was rear axle area 🤷♀️ could of been that what's started it originally
Nah that was only a light hit to my rear quarter!
Definitely wouldn’t weld a washer to that lee wants some thick steel both sides & same on the other before it happens 😂
Weld a tube all the way through that will make it stronger much better than just welding a washer
Then how do you get the arm out?😂
Send your diff to a gearbox specialist they will have a seal for it no doubt
is the BM for sale yet? ;)
Lee this is totally off topic but what are you doing with that e46? Im after one thats all!
It’s not mine, all it does is get in the way 😂
@@itsleelockwood feel free to tell whoever it belongs to that i want it haha
"Think she's about to come"
Put a shirt on lad i just spit out my bad boy pot noodle then.
Why didn't you just cut them off¿
Do u miss the 350z 😉
Hahaha a little. But the mustang is cool
Americans be like “ the reality of owning a European car” lol by the way love the channel❤️
Lol, just cut the cable, your scraping it anyway 😁😁😁😁😁😁😁😁
Who needs a Mercedes for 4 wheel steering ayy
How dya get ya body fat so low? How much cardio you doin? Are you on keto, paleo, Atkins?
I eat like a pig I’ve no idea 😂
Good genetics! I’m fuckeded
That 350 z must of been a right heap if you thought it was a good idea to swap it for this bag of shite it’s just a money pit oh well your money
Yeah but all the cool content it's creating is a good thing right?
Just cut it
Have to love American engineering. 😂
it doesnt seem worth it... hate so say it Lee ahah
It definitely is😂
@@itsleelockwood great content either way
#cuntentovereveryting #fooked #hydrolife #slam #bang #transitions #makev8greatagain #hardworkbeatstalent #moneypit #hwbt #loggers #loggingit
Brother please get rid of this shed
I hate American cars. I would scrap it.
Trying to build the most un-roadworthy car in the UK 😂