Building a DIY POWER HAMMER | Part 3 | WITH PLANS
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- ⬇⬇ Get the PLANS here: ⬇⬇
www.etsy.com/c...
This is the final Part of a 3 part series where I build my Own 50lb Power Hammer.
Overall, the project cost me about 1500/1900USD and I'm super satisfied with the result!
If you have any questions about this project, please leave them in the comment section.
Thank you!
Many more projects will come, so be sure to subscribe! 👍
ITEMS USED:
Motor ► amzn.to/3zMH1AR
Diablo metal blade ► amzn.to/2OvVcFK
Paddle Switch ► amzn.to/3ofONvz
Welding Helmet ► amzn.to/3wMSDkG
Evolution Miter Saw ► amzn.to/36b9H8c
TOOLS/MACHINES:
3M - Noise Cancelling Headphone ► amzn.to/31zHkxB
3M - Respirator ► amzn.to/31z1708
Makita - Drills ► amzn.to/2HwZVn6
Steel Parallel Set ► amzn.to/3dQIry7
DeWalt - Angle Grinder ► amzn.to/34jfTKh
Penetrol Additive ► amzn.to/3meeF9n
Kleenguard - Safety Glasses ► amzn.to/34juNQS
Milwaukee Band Saw ► amzn.to/37zKrcW
Linseed Oil ► amzn.to/2TeXhVA
Evolution Miter Saw ► amzn.to/36b9H8c
SamN Stain ► amzn.to/3iL5VIQ
Milwaukee 18 Gauge Brad Nailer ► amzn.to/37JAit6
Gorilla wood glue ► amzn.to/2VYrqNR
CAMERA GEAR :
Canon 60D ► amzn.to/3jkJzLu
128g Memory card ► amzn.to/3joFrd8
Tripod ► amzn.to/34noZpo
Links included in this description might be affiliate links. If you purchase a product with the links that we provide, we may receive a small commission. There is no additional charge to you! Thank you for supporting our channel so we can continue to provide quality content!
![[ TEASER ] เงาะป่า - วงL.กฮ. | TMG RECORD](http://i.ytimg.com/vi/M4ObdFfcPww/mqdefault.jpg)
gerçekden çok beğendim teknik olarak gayet tatmin edici.verdiğiniz bilgiler oldukca önemli sizi tebrik ediyorum ben türküm kanalınızaa abone oldum sizin gibi sanatkar kişilere saygımız sonsuzdur. bilginizi paylaşmanız beni çok etkiledi teşekürler. başarilar.
çok teşekkür ederim ! Desteğiniz gerçekten takdire şayan!
Nice job 👍
Nice work mate 👍
Thanks!
Looks really good. One place that I recommend improving is at all the bolted bearing hinge points. The bearings must ride on the smooth shaft of the bolts and not the threads. The threads will eat the bearings. Also add grease fittings and passages.
Great idea !
I just purchased a king horn spring hammer got to put it together looking forward to see it working good video
It turned out very unique and very beautiful. The Craftsmanship there is very amazing and awesome. Can't wait to see more videos soon my friend. Hopefully you get great use out of it for many years to come my friends. Keep up the great craftsmanship and hard work my friends. Forge On. Fab On. Weld On. keep Making. God Bless.
Thank you! It's very appreciated Jared
@@KOPOprojects your very welcome
Congratulaciones Camarada.
Excelente proyecto.
Saludos a todos desde México.
Gracias !
hello let me send you a message I watched your video on making your hammer and I bought the plans on esty. Everything is very good, do you just have the internet link for
pillow block bearings? thank you in advance, truthfully yours
Hi Étienne,
Could you please contact us from your etsy account and we will give you all the support that you need !
By the way we speak french if it's easier for you !
Nice work
Any chance you could share spring dimensions?
I have a hammer mostly built but feel my spring is too light.
If not, no worries
Cheers
mc master carr part: 96485K197
Have fun forging !
Very well built and with all the explanation. Really encouraging and inspiring. Thanks very much.
im having problems with the uwhm plastic inserts - the anvil keeps pulling them out - any suggestions
You need a retainer over them that have a square hole 1/16 to 1/8 larger than your ram. This way they will not be pulled out.
i have the retainers and they are stil pulling out
I would say either try a tighter fit on the retainers or try thicker uhmw insert so that they can't be pulled out
Minted hammer fella' Seems like I will have to get cracking on mine. ta ta.
Not too sure if you haven't already mentioned it, must have missed it, but what did it cost you to build this absolute unit of a hammer?
Depending on the cost of steel in your region it will cost you about 2000 dollars to build this hammer with new material
@@KOPOprojectsthat is a great price!
I found that your dies in the video are larger than specified in the plans. Even with the corrected anvil height, I still needed to add another 1 inch plate to get the dies to the 1 5/8 dimension recommended. Also, the turnbuckle adjustment won't work with only the right hand threaded rod in the parts list. I highly recommend having the holes for the bearings done on a milling machine as I found a drill press to be too imprecise. Good plans overall. I just finished this build, cost about US$2500.
Thanks for the info ! I will correct everything that I can in the plans !
what was the actual cost on the build ? steel does cost different in every state . McMaster-Carr is a great place to buy many items little pricey but well worth it
I paid about 2000 canadian dollars about a year ago if this help you !
6:30 Are you in contact with Bold Head? Or a seat has been kept in the middle of it. Open it once and tell what is the technique.
There is a plastic bearing surface between the bolt head and the ram ! I hope this answer your question ?
You are really clever and skillful man.I watched your 3 video.I hope so I will do your power hammer in my workshop.greetings from Turkiye bro.
Thank you so much ! Hope you have fun building yours !
Trabalho excelente, meu brother. Parabéns.
It all looks clean and well built, but can we see it run? "Don't buy until you test drive"...
Of course of course, if you want we have a youtube short with me using the hammer with hot steel but if you want more send us a e-mail at kopoprojects@gmail.com and we will gladly answer all of your question and send you video of the machine running !
It looks very well made. I found that the white lithium grease in a spray can works very well on the hammer portion. Good luck with all you do.
Thank you ! I will try that !
Very impressed with the design and work. Before I purchase the plans I had one question. You said the dimensions were altered on the plans to correct the arms from hitting the ram. I take that statement to mean you adjusted the plans so the arms no longer hit the ram and you do not have to mill out those angled notches in the ram now? Is that correct?
Yes exactly everything is corrected in the plans you won't have to mill an angled notch!
@@KOPOprojects perfect thanks...
Fantastic build.
Very nice job. I really want to build one myself.
Thanks ! We have diy plans to build one yourself in the video description !
how many motor HP.?
I used a 2 Hp motor but you could make it work with a 1 1/2 Hp motor !
@@KOPOprojects thank you
What type of motor is being used for the power hammer is it low or high speed motor
It's a low rpm motor it runs at about 1750 rpm !
میتوانید برای ساخت پتک برقی آهنگری به بنده کمک کنید
اگر می خواهید یک چکش برقی برای خود بسازید، ما در واقع برنامه هایی برای فروش داریم! برای خرید آنها می توانید روی لینک موجود در توضیحات ویدیو کلیک کنید
Brother you worked very well . Plz you tell that what is the function of spring
It's to provide a snaping motion to the ram to hit harder.
cool project bro
Thanks !