I Found the BEST Tempered glass screen protector for Galaxy S23 Ultra - Milomdoi

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ธ.ค. 2024

ความคิดเห็น •

  • @chubbyjohnson5480
    @chubbyjohnson5480 ปีที่แล้ว +127

    I wish Samsung would ditch even the subtle curve on screens. But at least we now have screen protectors that work. I remember the hell i had with my Note 8

    • @theunknownguy265
      @theunknownguy265 ปีที่แล้ว +17

      Well I love the edge screen and I hope they keep the edge for ever inshallah alhamdulilallah

    • @bobbuilder118
      @bobbuilder118 ปีที่แล้ว +2

      I agree. Most annoying thing about most flagship phones

    • @bobbuilder118
      @bobbuilder118 ปีที่แล้ว

      What do you like about it?

    • @manuelpiston
      @manuelpiston ปีที่แล้ว +1

      They will now

    • @fallback8314
      @fallback8314 ปีที่แล้ว

      that's why i got and love the bay pixel pro 8! it's the first high end phone with a flat screen since the samsung galaxy note 5.

  • @triplek-dysongamingwithdan7771
    @triplek-dysongamingwithdan7771 ปีที่แล้ว +81

    Bit of a PSA for you all: if you have a case that grips tightly around your phone edges, like the Spigen Tough Armor as I do, then it will lift this Milomdoi scree protector up. I tried applying it twice and screwed up with not applying force causing bubbles, but I noticed that the edges were being lifted up.

    • @micahjohnson9184
      @micahjohnson9184 ปีที่แล้ว +5

      Dang, thanks for the info! I'm getting the Spigen Ultra Hybrid S clear case. So, I guess I'll have to look for another screen protector. I'm curious to know about the screen protector covering the selfie camera with no cut out. Do you see a drop in quality when taking pictures or video?

    • @Garrett1974
      @Garrett1974 ปีที่แล้ว +1

      @@micahjohnson9184 I had the Mowei UV protector on the S22 Ultra, also no cutout, and I have to say I didn't see any difference, no weird glaring or haze or anything. I'm sure this is fine as well :)

    • @Garrett1974
      @Garrett1974 ปีที่แล้ว +34

      This could all have been avoided if Samsung hadn't made this screen curved... the curve is so minimal right now that I'm even thinking what's the point, just make it flat already.

    • @micahjohnson9184
      @micahjohnson9184 ปีที่แล้ว +1

      @@Garrett1974 Thank you! 🙏🏾

    • @triplek-dysongamingwithdan7771
      @triplek-dysongamingwithdan7771 ปีที่แล้ว +1

      @@micahjohnson9184 I didn't get to test it with my camera, as I was putting it on before I ever set my phone and got access to the camera. I feel like it would slightly drop in picture, but I'm not entirely sure.

  • @AznDude7244
    @AznDude7244 ปีที่แล้ว +52

    PSA for anyone with tight fitting cases. As some have mentioned, this screen protector might be a hit or miss with certain phone cases. Unfortunately, it didn't work out for me with my Mous (brand) phone case as the case is very tight fitting and would wrap around near the edge of the screen. For this particular reason, I kept experiencing issues with micro-bubbles, corner lifting, and edge lifting due to the tight fitting case pushing up the glass. This became an huge annoyance and made it difficult to type or detect buttons along the lifted edge. I've been using it for a few weeks (since release of S23 Ultra) and the edge lifting seems to have gotten worst as the adhesive has lost it's tackiness. Fingerprint sensor was a bit problematic for me as well even with the touch sensitivity setting turned ON. Don't get me wrong, the tempered glass is definitely amazing (feeling) but wish it would had worked out for my situation. Definitely hoping for some better solutions (if any).
    Side note: For installation, follow the exact steps mentioned in the video for installation! If you don't apply pressure down the middle first, then you'll end up trapping air pockets in middle of the screen.Do it correctly the first time and it might save you some headaches! haha 😂

    • @Yame39
      @Yame39 ปีที่แล้ว +3

      Which Mous case do you have? I have the clarity 2.0. I was going to purchase this screen protector.

    • @Tackyauto
      @Tackyauto ปีที่แล้ว

      Could just use the cases in this video? I’ve got an official Samsung leather case, caudabe sheath and a dbrand grip on order and will get the official Samsung case in this video and this screen protector and do some testing

    • @AncientAdventures
      @AncientAdventures ปีที่แล้ว

      Yes mine went smooth too but it won't register my prints at all.

    • @fallback8314
      @fallback8314 ปีที่แล้ว +3

      the "solution" is samsung needs to stop with these absolutely USELESS curved screens. i have the phantom black 512GB s23 ultra but haven't used it since i got the FINALLY flat screen bay pixel pro 8.

    • @toxicfrog6943
      @toxicfrog6943 ปีที่แล้ว

      ​@Yame39 what did you get instead I done the same thing

  • @yestoES355
    @yestoES355 ปีที่แล้ว +14

    PSA for people with the official galaxy s23 ultra leather case, no issues on my end with the protector lifting or causing corner bubbles. No issues here and it's a good fit.

  • @Statistic189
    @Statistic189 ปีที่แล้ว +31

    The black borders also cut off the visible part of the screen reducing the screen size of what you see. So it is going to hide some of that screen. Personally its got too many cons to be worth it to me.

    • @ilm-youtubestories
      @ilm-youtubestories ปีที่แล้ว

      no bro, its outside of the bezel. i'm using S23 Ultra Protector

    • @Statistic189
      @Statistic189 ปีที่แล้ว +4

      @@ilm-youtubestories I've used it I know for a fact it covers the screen lol

    • @wingriderrr
      @wingriderrr ปีที่แล้ว

      ​@@ilm-youtubestories which case you are using

  • @armyboy107
    @armyboy107 ปีที่แล้ว +18

    This screen protector is probably the best full adhesive screen protector that you can get for the S23 Ultra that does not require mathematical engineering degree to put the liquid adhesive screen protectors on. Yes it does cut part of the visible screen due to the black borders around the screen protector but it's minimal. A lot of cases that wrap around the screen itself will lift the screen protector especially in the corners I will recommend rhinoshield case it goes up right to the screen protector without touching it only bad part it's a little expensive for a case.

    • @Shady88Italy
      @Shady88Italy ปีที่แล้ว +1

      You say it's expensive, but you haven't bought Casetify

    • @fallback8314
      @fallback8314 ปีที่แล้ว

      rhinoshield crash guard?? i bought one for my note 8 a few years ago but was too scared to use it lol

  • @lukejones5957
    @lukejones5957 ปีที่แล้ว +2

    Managed to install fine. Fingerprint sensor worked fine too. Got all the bubbles out too. Just kept lifting with my case - Spigen.

  • @SilentlyPrickable
    @SilentlyPrickable ปีที่แล้ว +7

    I was quite hyped about this screen protector and jumped few hoops to get one. Then once it was installed, I'm not impressed that much. The black bezels cover part of the screen sides. Fingerprint does work but you need to press quite hard. Overall touch feel on the screen is also altered because the protector slightly thickens from the middle to the sides which reduces sensitivity a bit in the thicker parts. Not to mention the sharp edge of the screen protector is well above the actuall phone which creates a gap - it'll catch all the gunk from your fingers, dust, etc.
    I'm curious for how long I'll have the nerves to use this and then modestly return to a cheaper hydrofilm based protector.

    • @SilentlyPrickable
      @SilentlyPrickable ปีที่แล้ว +1

      Great, one day after the installation and quite obvious flaw emerged. The glass edges which are on both sides freely in the air are fragile as hell. I don't know I bumped my phone with but I just found out that the protector is chipped (the whole day was in my hand or on a table...).

  • @shinyobsessed1271
    @shinyobsessed1271 ปีที่แล้ว +3

    I was pretty excited after installing this - took a little extra time to pry the corners and get the bubbles out, and when I was done it seemed nearly perfect. Then, alas, I could not get the phone into my Spigen case without the corners of the screen protector peeling up. I tried over and over, stretching and prying the case, but finally admitted defeat while watching the bubbles' inexorable spread across my screen. I removed the Milomdoi; corner protection far outweighs screen protection for the moment, I figure...

    • @Flemo2140
      @Flemo2140 ปีที่แล้ว

      Did you find a screen protector that worked with your Spigen case? I had the same thing happen to minee with the Spigen tough armour so now looking for a new screen protector

    • @shinyobsessed1271
      @shinyobsessed1271 ปีที่แล้ว +1

      @@Flemo2140 I didn't. I ended up using an OtterBox Commuter case with a Whitestone Dome screen protector. I hope you find a good solution for your phone.

  • @cbesc
    @cbesc ปีที่แล้ว +6

    Not compatible with the Supcase Unicorn Beetle for anyone with this case. Top frame kept lifting the glass creating air bubbles. Great installation video though. I used this instead of the instructions it came with.

  • @G-O-N-x
    @G-O-N-x ปีที่แล้ว +1

    Just installed it, it fits perfectly my case, when i say perfectly i mean 1 more millimeter top or bottom and i would have to return it.
    Fingerprint accuracy doesn't seems to be the best tho, and it's definitely slower....but it works

    • @HighTechCheck
      @HighTechCheck  ปีที่แล้ว +1

      It is a tight fit but like you said, it fits. It’s been impossible to find a good tempered glass protector that’s doesn’t use liquid adhesive that’s worth it. I was so excited when I saw this lol

    • @vinnieducy947
      @vinnieducy947 ปีที่แล้ว

      Would you mind telling us which case you are using? I need that case. Please!

    • @G-O-N-x
      @G-O-N-x ปีที่แล้ว

      @@vinnieducy947 UAG pathfinder

    • @BenItBuhner
      @BenItBuhner ปีที่แล้ว

      @@G-O-N-x *buys one of the most expensive cases*

    • @antoniomorton3029
      @antoniomorton3029 ปีที่แล้ว

      I agree with your assessment. I have come to the same conclusion.

  • @XplayPictures
    @XplayPictures ปีที่แล้ว +3

    So, with this screen protector what cases actually work withoutany issue ? I'm looking for minimalist look but good protection.

    • @MastiffRonin
      @MastiffRonin ปีที่แล้ว +1

      Simtect Camera Protector Case and Carveit Wood Walnut Case works. the carveit was way more premium then i thought it would be. Ringke and Spigen cases did not

  • @andyp.4205
    @andyp.4205 11 หลายเดือนก่อน

    The best screen protector that I ever found was one that Samsung pre-installed on all S20 Ultra from the factory. Never had bubbles on it and still going strong to this day. I upgraded since to the S23 Ultra and the film seems to be the best.

  • @PotLid
    @PotLid ปีที่แล้ว +7

    Idk, I tried this one before White dome glass. It was horrible with FP sensor even after re-registration

    • @johnperez8600
      @johnperez8600 ปีที่แล้ว

      Same here. I ended up ripping it off and returning it. The fingerprint scanner worked, but only 25% of the time. The times it did work, it was definitely a lot slower, and I had to press down pretty hard. I don't recommend it. I bought the one from Whitestone and I'll see if it's any better. It's pretty expensive tho.

    • @G-O-N-x
      @G-O-N-x ปีที่แล้ว

      it's not the best yeah but it's ok when you put your fingerprints multiple times

  • @hardtruth8217
    @hardtruth8217 ปีที่แล้ว +1

    These are great however the edges are so brittle I've gone through 8 in 4 months.... the absolute lightest bump on the edge shatters it

  •  ปีที่แล้ว +1

    Thanks! This is how every review should be done! ... Well done man!

  • @stefank.4746
    @stefank.4746 ปีที่แล้ว +3

    Installation was very easy, i had no bubbles on the first try. I did it like you. 4 corners press first, then the full middle section and in the last the sides nice and slow. worked perfect.

    • @HighTechCheck
      @HighTechCheck  ปีที่แล้ว

      Nice!

    • @vinnieducy947
      @vinnieducy947 ปีที่แล้ว

      Do you use a case? If so, which one?

    • @stefank.4746
      @stefank.4746 ปีที่แล้ว

      @@vinnieducy947 Only fitting case i found so far is from cresee, more testing tomorrom 😅

    • @stefank.4746
      @stefank.4746 ปีที่แล้ว

      @@vinnieducy947 After more testing i can say very many cases fits for the tempered glass protector. Only not fitting was from spigen, caseology and Ringke...

    • @Bush0369
      @Bush0369 ปีที่แล้ว

      ​@@stefank.4746I think otter box also cause some bubbles occasionally

  • @DAM02K12
    @DAM02K12 ปีที่แล้ว +1

    I have been looking for a screen protector for nearly a week they all seem to have very complicated installations thanks for the video.

  • @birdmojophotographer
    @birdmojophotographer ปีที่แล้ว +1

    😂I tried to remove that last bubble in the corner by just barely lifting the glass with the tool - crack. The second cover fit better. Thought I had it made. This time a couple of small bubbles formed but no problem. A half hour later I set my Ultra on the wireless charger and elongated bubbles formed the full length of the phone on both sides at the curve. Several larger bubbles formed at the top and bottom. I tried to squeege the bubbles to the corners on both sides and the glass cracked in two places. Nasty mess to get off. Back to the film.

  • @kaylaschoch4119
    @kaylaschoch4119 ปีที่แล้ว +3

    I've bought atleast 10 packs of this type of protectors (so 20 total), they break very easily. And as others said, certain cases cause the sides to lift. Definitely not worth it in my opinion.

  • @hugobettencourt84
    @hugobettencourt84 ปีที่แล้ว +2

    Dont recommend with spigen cases. It starts easily lifting the edges. Also with polarized sunglasses the colors on the screen turns yellowish and weird. After a day of use microabrasions appears and it is easily seen under the sunlight.

    • @SweatyCubes
      @SweatyCubes ปีที่แล้ว

      What screen protector would you recommend for a Spigen case?

    • @uprising7122
      @uprising7122 ปีที่แล้ว

      Even the thin fit one?

    • @SweatyCubes
      @SweatyCubes ปีที่แล้ว

      @@uprising7122 Yes. I just ended up getting a different one and it works great.

    • @uprising7122
      @uprising7122 ปีที่แล้ว

      @@SweatyCubes which different one?

  • @smartmarketingpros
    @smartmarketingpros ปีที่แล้ว +2

    My experience with Milomdoi has been somewhat disappointing. Followed the instructions after watching the video several times. Removing a few side bubbles from the first installation was a little challenging and I ended up cracking the glass. Ok, no worries, I have a backup. Installed the second, fewer bubbles got them out, and it looked like a clean install. The next day, air bubbles ran down both sides. I'm still seeing them pop up down the sides. So my vote is a BIG NO on Milomdoi.

    • @Bush0369
      @Bush0369 ปีที่แล้ว

      It's definitely a hit or miss, cuz I used this product and it has worked great and yet when decided to put a new protector on it looks like shit lol air pockets littered throughout. But again it has worked in the past so...50/50 maybe?

  • @AncientAdventures
    @AncientAdventures ปีที่แล้ว +1

    Well...mine lasted about 4 days and now it is cracked. Have no idea how it cracked i have been really careful. The installation was great , but unfortunately it does not last long. 😢

  • @besskurz
    @besskurz ปีที่แล้ว +1

    It fits well with poetic cases. Downside, fingerprints reader is not working anymore

  • @geu6270
    @geu6270 ปีที่แล้ว +1

    That slight bit of resistance you say it's too much for me there's too many good ones out there a little thicker but are really good glass and have zero

  • @fist003
    @fist003 ปีที่แล้ว +5

    as this screen protector cover the front camera, does it affect the picture quality..?

    • @christinetan3008
      @christinetan3008 ปีที่แล้ว

      Unfortunately it does. I am still looking for other options for tempered glass for s23 ultra..

  • @mariomusik1
    @mariomusik1 ปีที่แล้ว +39

    Just ripped mine off... Bubbles galore and I followed the instructions completely.

    • @kaiichinose9590
      @kaiichinose9590 ปีที่แล้ว +1

      Yeah its a not a terrible protector just not a fan. Just get the 2 pack of white stone dome. Just when your cure the Whitestone Just double the time it says. Then after you wipe off anything excess cure it again. Works feels and looks amazing.

    • @G-O-N-x
      @G-O-N-x ปีที่แล้ว +2

      Just finished applying mine and it has ZERO bubbles, i took my time to apply it perfectly

    • @MastiffRonin
      @MastiffRonin ปีที่แล้ว +6

      @@G-O-N-x Same here and quality seems stronger then whitestone. My edges would always shard and crack. i do wish it didnt have the black edges though

    • @kaiichinose9590
      @kaiichinose9590 ปีที่แล้ว +2

      It’s not too terrible I have just mastered white stone dome and over the years they have served me the best. No popping up with cases no interference. It's all in the curing process. I triple cure mine and never have issues.

    • @jimmccourt4270
      @jimmccourt4270 ปีที่แล้ว +1

      My first try happened also. I carefully lifted with the plastic thing and tried again, slower, more force, and using 2 hands on the squeegee. Worked fine 2nd time. All bubbles got worked out.

  • @jtliew583
    @jtliew583 11 หลายเดือนก่อน

    For the camera lens protector, I would advise not putting the ultra wide one as the "zoom in mic" is below it.

  • @vm.x
    @vm.x ปีที่แล้ว +1

    I have used this screen protector for 4 months and both protectors broke/cracked unexpectedly, seemingly from just being in the pocket and from pocket pressure. Very easy to install, compared to Whitestone Dome, but the big downside is that they don't last.

    • @jasonfaiola3897
      @jasonfaiola3897 ปีที่แล้ว +1

      True went through four of them in 2 weeks

    • @vinlondon8904
      @vinlondon8904 ปีที่แล้ว +3

      Do you kids play baseball using your phones ? Lol

    • @vm.x
      @vm.x ปีที่แล้ว

      @vinlondon8904 how long have you had the screen protector for?

  • @DamyxProductions
    @DamyxProductions ปีที่แล้ว +3

    With it's 0,16mm thickness allows the fingerprint sensor work pretty well and giving a very decent protection against scratches, I love that one over the thicker ones.

  • @antoniomorton3029
    @antoniomorton3029 ปีที่แล้ว +1

    Great screen protector. I have two issues though. The first one is the accumulation of finger prints. I'm always wiping down the phone throughout the day because of my greasy fingers. The second issue would be the fingerprint sensor. It 90% works. But that 10% does get a little frustrating. Especially after washing and drying your hands. It will not recognize your fingerprint. I have to try at least four or five times before it registers.
    But everything else is great. I think I will set up my facial recognition in case this happens to me again.

    • @shanedavis9170
      @shanedavis9170 ปีที่แล้ว +1

      A oleophobic coating will fix this

    • @roamingkeraliteKL05
      @roamingkeraliteKL05 11 หลายเดือนก่อน

      The second issue is with the phone , even I have the same without and protector

  • @sof_d
    @sof_d ปีที่แล้ว

    And no awful hole!! Been struggling to find a good screen protector for my 23 ultra, so I think this one will be my next purchase for sure

  • @ankomitarashi-488
    @ankomitarashi-488 ปีที่แล้ว

    thank you. i just switched back from an iphone to this and was having a hard time finding a screen glass with full adhesive since it's so common for iphone protectors.

  • @technoandtacos8
    @technoandtacos8 ปีที่แล้ว

    Finally a good tempered glass protector for Samsung, i hate the messy liquid cuz it spills all ove the phone on the speaker and the edges of the phone, and the other cheap ones has only glue pn the edges and their too week, they broke easy and when you put the phone case that thing start lifting. So this is perfect!!!! Just gonna prder it RN!!!!!

  • @breyton490
    @breyton490 ปีที่แล้ว +1

    Milomdoi Tempered glass screen protector - Awesome screen protector, BUT it is not compatible with most phone cases. The phone case will cause the sides of the screen protector to bubble and separate from the phone. If you are not using a phone case, then this screen protector is great - if you do use a phone case, good luck finding a case that does not cause the screen protector to separate from the phone along the sides.

  • @Garrett1974
    @Garrett1974 ปีที่แล้ว +1

    I've had something similar for the Oneplus 7 Pro, full adhesive, and you had to lift up the corners one by one to squeegee out the bubbles, but once it was done it was fully adhered, also on the curved edges yes. Hope this version is somewhat case friendly... I believe the black edges are there so you can lift it up without seeing it (could be a little bubble/dust particle under there if you lift it)

    • @HighTechCheck
      @HighTechCheck  ปีที่แล้ว

      It’s going to be a tight fit for the most part and unfortunately the only way to know how it fits with your particular case is to try it.

    • @jasonfaiola3897
      @jasonfaiola3897 ปีที่แล้ว

      No good breaks way to easy trust me they suck

  • @hansoethet
    @hansoethet ปีที่แล้ว

    It's really nice Tempered glass screen protector. Finger print just works fine. Very easy to install. 1st tried and no bubble at all. highly recommend !!!! Thanks for your review !!!

    • @wingriderrr
      @wingriderrr ปีที่แล้ว

      Which case you are using with it?

  • @SAVAGE_808_YT
    @SAVAGE_808_YT ปีที่แล้ว +3

    This screen protector breaks very fast.. it has nice coverage but you will need to replace it every couple weeks.. I went through 3 in a month without dropping my phone ever...

    • @Flemo2140
      @Flemo2140 ปีที่แล้ว +2

      yep same thing happened to me

  • @mariathasanmariathasan3163
    @mariathasanmariathasan3163 ปีที่แล้ว +1

    Can you tell me about the black border.. is that black border blocking the screen.. i cant go for uv tempered because will spread into spen or front speaker.. so i want full glue tempered with fingerpint support also.. i only find this model.. i tried lito 3d.. but fingerprint is not working correctly.. also its black boder blocking screen little.. so pls tell me is this blocking the curved screen or top

  • @phil-1115
    @phil-1115 ปีที่แล้ว

    I put the protector in the bottom first then lowered it down. I pressed on the four corners and part of the protector was hanging on the guide. it cracked. The second one worked better, but there are still bubbles that I can't get out. I tried lifting the top left corner just a little and I think the corner cracked a little. Now it seems like bubbles keep forming in that same corner and won't go away. Oh well. I will live with it now.

  • @joshuametcalfe6336
    @joshuametcalfe6336 ปีที่แล้ว

    Good screen protector I had a couple bubbles didn't do the installation the same way unfortunately came across your video afterwords but , One thing to mention it does slow down the overall screen response, I have the screen protector setting turned on just noticing phone doesn't feel the same as before Big mention

  • @Deftaly
    @Deftaly ปีที่แล้ว +1

    Does it have a noticable hole for the fingerprint? Wasted 25 bucks on a protector with this annoying circle

  • @josh6499
    @josh6499 ปีที่แล้ว +1

    Its got a black border that covers up the corners of the screen, making them look more rounded.

  • @troyrushing9746
    @troyrushing9746 ปีที่แล้ว

    Update: I installed this on my S23 Ultra last night and I put my phone in the holster this morning headed to work. I didn't take it out of the holster until lunch time. After looking at the screen, it had several cracks. It was pristine when I looked at it this morning though. My guess is that it can't handle the slight pressure of being in a holster.

    • @jasonfaiola3897
      @jasonfaiola3897 ปีที่แล้ว +1

      Lol bro these are the worst screen protectors in the world they shatter even if you try to clean the edges they shatter he don't tell you that he just shows you how easy it is to install how pristine it looks but let that dude do a part 2 24 hours later lol

  • @tztexas
    @tztexas ปีที่แล้ว +4

    Thanks for the great installations and reviews. I did try this one and fingerprint was hit or miss. no bubbles but the fingerprint was annoying so I pealed off ever so gently from the corners and it quickly cracked in the center and was an absolute mess getting off. Little pieces where left on my screen and thankfully I escaped with no damage. Went back and will probably stay with AM film.

    • @HighTechCheck
      @HighTechCheck  ปีที่แล้ว +1

      I’m sorry to hear you had a bad experience, I typically have issues with the sensor when my hands are dry. It helps if I use a bit of lotion and that seems to help.

    • @chumley2010
      @chumley2010 ปีที่แล้ว +1

      Agree 100%. Had to fight to even register any fingerprints with this one on - even with the sensitivity switched on, and getting it off was the worst! Shattered like safety glass into thousands of shards. No bubbles in the center but a battle to rid them from the curved edges. Gave up and went back to a Torras film protector that's as good a film protector as I've ever used, film is just not the same as glass.

    • @backpain100
      @backpain100 ปีที่แล้ว +1

      Just installed it yesterday and I had the same issues. Finger print scanner doesn't work well, may be worked 25% of the time. Also cracked when i tried to remove it. Perhaps they can refine this screen and it'll be a hit product.

    • @Alchemy.Gaming
      @Alchemy.Gaming ปีที่แล้ว

      I know this thread is old but do either of you remember if you increased touch sensitivity in settings?

  • @ShannasCountryCreek
    @ShannasCountryCreek ปีที่แล้ว

    Thank you! Just had to make a claim on BRAND NEW S23Ultra Lavender phone😭 Verizon rep sold me cover and screen protector and said I'd never have to worry buying another one...fast forward...Crack in curve which I am hearing now the curve is an issue. Ugh I've had every note and can't get away from them, cause I love my pen. I'll be ordering this cover 2nght🥰

  • @stefank.4746
    @stefank.4746 ปีที่แล้ว +2

    Which cases are fitting with this tempered glass ? I tryed with spigen slim fit and it lifts the edges... ☹

    • @antoniomorton3029
      @antoniomorton3029 ปีที่แล้ว +1

      Samsung cases works with this screen protector. I have the Samsung leather and the silicone case and they both work. No pushing on the edges of the screen protector.

  • @officialdon_julio
    @officialdon_julio ปีที่แล้ว

    Best screen protector I've ever used 👌it's on my s23ultra no issues whatsoever

  • @i0001w
    @i0001w ปีที่แล้ว

    Heat the protector with heat gun then push again so it will melt the adhesive then stick much better and clarity

  • @hbhavsi
    @hbhavsi ปีที่แล้ว +2

    I installed the AmFilm today. While the installation process went alright, and the screen protector looks good, I have issues with fingerprint accuracy. I have to try it 2-3 times before succeeding. Very frustrating.
    The only reason I didn't opt for the Miomdoi is that it covers the front camera.

    • @HighTechCheck
      @HighTechCheck  ปีที่แล้ว +1

      Have you re registered your fingerprints after the installation? Also when my fingers are dry my phone has issues reading my fingerprint

    • @hbhavsi
      @hbhavsi ปีที่แล้ว

      @@HighTechCheck i did reregister it, and i increased the touch sensitivity. My fingers might have been dry when i registered. I'm going to delete and retry with moisturized skin.

    • @hbhavsi
      @hbhavsi ปีที่แล้ว

      @@HighTechCheck I moisturized my thumbs and re-registered fingerprints. They work better for sure!! Thanks for the tips!!

    • @nasmanxtra
      @nasmanxtra ปีที่แล้ว

      @@hbhavsi amfilm tempered glass?

    • @hbhavsi
      @hbhavsi ปีที่แล้ว

      @@nasmanxtra yes

  • @Christopher2024ND
    @Christopher2024ND 11 หลายเดือนก่อน

    Are you going to have some Screen Protectors to test with the S24U soon? I hope we have many more options of screen protectors for the S24U and it's "nearly" flat display!

  • @TacticalGamer007
    @TacticalGamer007 ปีที่แล้ว

    For 17€ compared to Whitestone Dome which is 60€, clearly this one is a must-have but i still preffer the installation method from Whitestone.
    But anyhow, a great video, i like the camera protection.

  • @RonaldRodgz
    @RonaldRodgz ปีที่แล้ว +3

    What about the black frames of the glass protector? I heared interfear with some of the display, since you have a black background in your cellphone you may not noticed, I would love to see another review checking this and also using the front camera since the glass covers it

    • @MastiffRonin
      @MastiffRonin ปีที่แล้ว +3

      I also have this protector and it went on flawless! The fingerprint sensor and spen work great as well. The black edges do seem to slightly interfere with the curved part of the display blocking some of the waterfall bezel. it doesn't bother me much but this would be hands down best protector if it was completely clear. seems stronger then other UV brands with not mess. front camera seems perfect to me to interference. i did not use the back camera protectors due to how it just sat across all the lenses

    • @RonaldRodgz
      @RonaldRodgz ปีที่แล้ว

      @@MastiffRonin Thanks bro

  • @officialdon_julio
    @officialdon_julio ปีที่แล้ว

    Just ordered mine today 🤗 The am film wasted my time and money,The liquid screen protectors are a headache for the s23ultra hopefully I'm satisfied with this one thanks for the video and installation 👍

  • @prestokun
    @prestokun ปีที่แล้ว +1

    Just what I need. Thank you.

  • @LeoMB90
    @LeoMB90 8 หลายเดือนก่อน

    For anyone struggling with bubbles.... CLEAN YOUR SCREENS FIRST!!! That will solve the problem.... and i'm talking about the dust specks... be very careful to remove them all first, otherwise bubbles galore! 😅

  • @zinzi12
    @zinzi12 ปีที่แล้ว

    Thanks for the review. She helped me buy a great product. Installation is really simple

  • @EstoYKoGAMER_
    @EstoYKoGAMER_ ปีที่แล้ว

    I got this screen protector witha otterbox defender, its work perfectly

  • @jasonlo3786
    @jasonlo3786 ปีที่แล้ว

    I use an Encased thin armour case and it doesn't work. The bubbles keep coming back along corners and edges even after I press them out.
    Also I used my thumb to push a bubble out up near the camera, and when my thumbnail went over the lip the force of just my nail going over the edge fractured the protector from the camera notch down. (I'll take the blame for this)
    Amazon user reviews are only 2 stars out of 1800 reviews so not impressive in the least. (Canada)
    It is the ONLY non liquid glass protector with full screen adhesive though. I'm hoping other companies make alternative options soon.

  • @Howie_fish
    @Howie_fish ปีที่แล้ว +2

    What would be the finger print accuracy rate would you say
    I've the uv one from imbzbk and love the accuracy of it....only grip is it's hard to install and I've 2 tiny bubbles that no one would noticed but me 🤣and it's really bothering me

    • @leeuniverse
      @leeuniverse ปีที่แล้ว

      Fingerprint doesn't work worth a donkey crap... Stay away, even with struggling to register two finger prints, and increasing screen sensitivity.
      Could have been a decent enough screen if it actually worked.

  • @derKorrax
    @derKorrax ปีที่แล้ว

    Thank you for you instructions and scratch tests

  • @karenwhittington2190
    @karenwhittington2190 ปีที่แล้ว +2

    2 thumbs up! Had 2 new phones to protect so I bought 2 boxes. The first one was perfect. I just followed your directions. I cracked the next one while trying to remove air bubbles. I got a little lazy and tried to catch 2 bubbles that were too far apart. The 3rd was a charm. We ordered several different cases to try. Neither of us want to use the camera protectors since we've heard too many stories about foggy lenses, etc. We live in the humidity capital of the US. So camera protection in the case is important. Just a small lip would be fine. This screen protector went on just fine with both the ES Boost Kickstand case and the UAG Plasma. No lifting that I can tell. I wish the UAG case had a bigger lip of the front screen so I might keep looking for a different case. I have always used the Speck Presidio Grip case but there is no camera bumper this time. Disappointing. I drop my phone at least a couple of times a month. Never had any damage using the Speck case. If camera protection is not a deal breaker, I highly recommend. I'm going to be returning mine. Since I still have it, I tested and the Speck Presidio Grip case worked fine with this protector. BUT - the Speck Presidio Perfect Clear was a nightmare to get the phone out of. Once I put the screen protector on, there was no way I was going to try to put the phone back in that case. UPDATE. I just tried the ESR Shock Armour Kickstand and I think I've found my winner. Not problem with this screen protector AND it gives me the front lip around the case and camera protection on the back. And a kickstand. So the 2 case winners are that one and the ESR Boost Kickstand. Pretty much everything was reviewed by your awesome channel, except Speck. Used your links to help support your wonderful work! Hope this info helps someone.

  • @carolharbin1574
    @carolharbin1574 ปีที่แล้ว

    Thanks for helping me make my decision to purchase this brand protectors and camera covers. These are absolutely fabulous. High Points: Excellent value (includes 3 sets) and the price is an outstanding value. Highly recommend.
    Thanks again for sharing your discovery.

  • @MoparNewport
    @MoparNewport ปีที่แล้ว +1

    Hi there, question if i could - What do you consider the *Toughest* protector and case combo? Ive had my S23U less than a month, and despite a case and a glue on protector it now has two seperate nasty cracks in it from drops onto gravel. I used to run Otter Defender cases, but what they offer for the S23U isnt anywhere close to what it used to be. Any thoughts? Thanx!

  • @Archie_Nikki_ELE
    @Archie_Nikki_ELE ปีที่แล้ว

    It worked for me. Thank you so much. Subbed!

  • @Snotbubble5736
    @Snotbubble5736 11 หลายเดือนก่อน

    Doing too much installing that. Never had it take that long to put on. You need to lay it on and press from the center first. Works every time.

  • @banahwaaymentupac
    @banahwaaymentupac ปีที่แล้ว

    Not compatible with most cases but so easy to install
    you need just slim cases (less protection cases)

  • @comptonjapan
    @comptonjapan ปีที่แล้ว +1

    Any chance at a video of trying this with different "rugged" cases that are not too bulky. Or anyone know of any that works well with this?

  • @A6AC89
    @A6AC89 ปีที่แล้ว +1

    Could you make a video of what cases are compatible with this screen protector? i bought the ringke fusion x as you recomended on other video and it lift the edges when is on my pocket.

  • @josefigueroa591
    @josefigueroa591 ปีที่แล้ว

    Yeah I bought this one first black border isn't that annoying to deal with but the front lense of the camera is covered in the adhesive and blurs the photos a tiny bit and the edges get slightly lifted by the phone case definitely no my favorite

  • @AGO2303
    @AGO2303 11 หลายเดือนก่อน

    I'm very dissapointed with this as I applied (maybe) a little too much pressure trying to remove air bubbles and it cracked instantly. As some people have already stated, this is not suitable for all cases as it will lift at the edges creating more air bubbles. It also smudged alot, u have to constantly wipe it clean. Looks great, feels great but my experience with it was not.

  • @motilek95sibir24
    @motilek95sibir24 ปีที่แล้ว +2

    Hello everyone. I just received this screenrotecror - my third in a row now. It is true that this one has not the irritating fingerprint circle, but the screen resolution is shit! Looks almost like dusty and similar to bad resolution screens. I do not know what to do with all these shitty screen protectors, I am so tired. Does anyone know where I could buy a fucking normal screen protector which is 100% clear and without this idiotic circle?

  • @wingriderrr
    @wingriderrr ปีที่แล้ว

    Which case you are using with it?

  • @o.n.l.ypiyush2761
    @o.n.l.ypiyush2761 ปีที่แล้ว +1

    What is the name of the glass

  • @TomaszSajnog
    @TomaszSajnog 9 หลายเดือนก่อน

    After holding this in a pocket for awhile I observed it is moving. I can even move it back to left, right, down, up. It's strange, force pushing this will move this successufly. It catches scratches also, little bit disipointed. I also don't understand why version which I have front camera open space which I don't see on your video.

  • @kylegreen3726
    @kylegreen3726 ปีที่แล้ว

    Thanks for the video what is the name of clear case you have in this video

  • @Rubiks_LIVE
    @Rubiks_LIVE ปีที่แล้ว +2

    I just installed this and it's a no-go for me. It's absolutely not case friendly. every case I've tried with this has made it start peeling immediately from the top, bottom, or both. pass.

  • @4eric16
    @4eric16 ปีที่แล้ว

    What case are you using with it? I tried with a spigen rugged armor and it lifts out on the sides. Not compatible unfortunately
    Spigen Rugged Armor 👎
    Onn Dual Layer Clear/Black case 👍
    Speck Presidio 2 Grip👎
    ESR Case with stand👍

  • @G-O-N-x
    @G-O-N-x ปีที่แล้ว +2

    Waiting for mine to get delivered

  • @Gabriel-pk5uq
    @Gabriel-pk5uq ปีที่แล้ว

    Does this film protect impact as well as the uv glue screens?

  • @chadolive1
    @chadolive1 ปีที่แล้ว

    You mentioned the adhesive protection..
    Those the plastic tpu? I am a clutz with this temper glass break with one fall?....also you can buy individual glass cam glass i thought that was what you were putting on it has a template like that they fit around the cam and stay on to protect your lenses....getting my galaxy in the mail today excited don't know what case to get I have a note note 9 with that plastic screen protector tpu....and 4 years ago I bought the clayco exeon by sup...tpu back bumper that comes with a screen protector built i just through the one extra and have loved it. One bubble wbe screens off but can't see if with the display on. Cut outs are much bigger that the more note 9 for the 23 ultra, so I am looking g for tempered glass for the lenses...poetic guardian seems like my only choice or punk case come with and extra frame without protector if you choose your own..I just wanna know if anyone can tell me if I drop my phone in the the way I have before with my current bouncy case clayco...saved me every time, same kinda for the new one...will the tempered glass break...will I be going threw sheets of tempered glass, or tpu? Open to suggestions around the board... toughest bumper plus SP I stalled....has to be able to survive a 5 foot fall if it falls out while I am doing pull ups that would be the worst it would get next to short falls out side which rarely happens...gym is my concern falling off tables...appreciate any suggestions.

  • @smoove7932
    @smoove7932 ปีที่แล้ว +1

    I had a few bubbles left over. My method was to lift up the protector until the air traveled to the bubble. Once there I left the protector pushed up and as a squeezed the air out, I slowly lowered the screen back down. Worked well for me. Also for the fingerprint, my finger was completely dry and glided across the screen so the fingerprint would not register. I moistened my finger just enough so it felt a little tacky on the screen, then the fingerprint reader registered my prints.

  • @vishwanathbondugula4593
    @vishwanathbondugula4593 ปีที่แล้ว +1

    But why is this product rated very poorly on amazon?
    Only 2.4 rating

  • @AngLi2000
    @AngLi2000 ปีที่แล้ว

    Will this work with UAG cases?

  • @keepitshort4208
    @keepitshort4208 ปีที่แล้ว

    The adhesive glue glue went in the s-pen slot how long will it take for me to get it out like whats the adhesive expiry ?
    Would appreciate the help 🙏🏼

  • @chadolive1
    @chadolive1 ปีที่แล้ว

    How does is handle drops, cause I will not purposely drop it, but I something that takes a drop in the gym with a bouncy case like a poetic guardian with instead the frame with this protector...this glass vs tpu film...I would appreciate your recomedation...23 ultra of course...

  • @dannit4562
    @dannit4562 ปีที่แล้ว

    Question, will this fit the Torras s23 ultra case? I'm looking to change from a polymer screen protector to a tempered glass one.

  • @uprising7122
    @uprising7122 ปีที่แล้ว +1

    Does anyone know if it fits for the thin fit spigen case?

  • @Octa111
    @Octa111 ปีที่แล้ว +1

    I see that it doesnt have a cut out hole for the camera. Have you tested out the camera before and after installation, in different lighting situations?

    • @HighTechCheck
      @HighTechCheck  ปีที่แล้ว

      I didn’t go that in depth for testing it

  • @cmtreetrooper
    @cmtreetrooper ปีที่แล้ว

    using it with the ultraclear mous case seems to be working well enough. i just suck at installing these so lots of microbubbles for me

  • @chuliu1
    @chuliu1 ปีที่แล้ว

    hi, does the finger print id works under the sunlight? I have another branded tempered glass screen protector and figer print id works indoors. Just doesn't work outdoors.
    Also, the screen protector I have has the cutout for finger print, a circle area with a more transparent film near the finger print area. I know this one doesn't have that.

  • @justinstaggs554
    @justinstaggs554 ปีที่แล้ว

    Does this cover the edges as well

  • @Woupsme
    @Woupsme 5 หลายเดือนก่อน

    Any link for EU Amazon? The Milomdoi I can find is only the flexible scratch protection.

  • @el.de.la.trokaamarilla8017
    @el.de.la.trokaamarilla8017 7 หลายเดือนก่อน

    Is it case friendly?

  • @tiniestlittlekiwi
    @tiniestlittlekiwi ปีที่แล้ว

    will this screen protector work with a samsung case. I got my case from the samsung store.

  • @_vk03
    @_vk03 ปีที่แล้ว

    Plz give the link of the same transparent case that you showed in this video?

  • @shkaviani
    @shkaviani ปีที่แล้ว

    Started dropping from all sides after a few hours. Installed according to instructional video. when I was going to remove it, it broke and got several cuts on my fingertips.
    Still have a piece of glass in my finger

  • @-_vh_-
    @-_vh_- ปีที่แล้ว

    I installed this screen protector. It looks perfect, no bubbles or dirt beneath it but the fingerprint sensor doesn't work at all.
    Any advice?

  • @under_wraps
    @under_wraps 9 หลายเดือนก่อน

    I loved ur videos on the multiple screen protectors but man this one is a 2.5 star rating on amazon. The wY you made it sound i was super excited but after reading the mass reviews i dont think i can use this one. I liked that there was no liquid and a full tampered glass but not worth the risk

  • @willwroten4871
    @willwroten4871 11 หลายเดือนก่อน

    My only concern is the black edge of the screen protector taking away from the display. I know on my previous models with curved screens those black edges always block some of the screen. How much did it actually take away with this one?