Hey thanks for your vid. It's clear and concise without a bunch of rambling. I have this product and used it, but now have a crack. I'm replacing it with the same product and just wanted to go through tit again.
I got this screen protector after failing with the amfilm one, which drove me nuts. I must say I was really surprised how well the fingerprint works on the Milomdoi and I managed to install it without any dust or bubbles trapped inside. I think this is the best screen protector for the S23 Ultra on the market at the moment.
yea this is the best one by far. this brand also sells one without the uv which is really bad and leaves lots of air bubbles. i went through 4 screen protectors thinking it was user error but i got this one first try with only a tiny piece of dust
@@darkbustergt8085 Yeah, I've been very happy with them. The only gripe I have is that the screen protector is slightly too large for most protective cases. I've been limited to the Latercase and Samsung Smart View case since acquiring it since all my other cases apply pressure to the side of the glass. Not great, but not horrible either.
dude great video thanks keep it up, not sure if the top right extra camera angle was useful but im sure you had a reason for it. subscribed looking forward to your other videos
very informative. I've had my s23 ultra for a week and ruined two screen protectors installed with this method and one flolab nano which has bubbles...I just ordered this set from Amazon, so we'll see. thanks for the tutorial!
Great to hear! Hopefully it works well for you. I'm really digging them. The only part that is of any concern for me is case compatibility, which is a potential issue for all protectors.
Hey, I got this protector and spigen ultra hybrid, but the screen protector is too close to the side edges, so when I dropped it, it peeled. Do you know of any case that has some protection and works with this screen protector? Maybe spigen thin fit? Something else?
I primarily have been using the Latercase with it. I suspect the Pitaka cases or other ultra thin cases would work. It is definitely one of the weaknesses of the screen protector.
This was a wonderful and informative video, lots of clear direction and tips for better installation. It's very helpful to have the merchant's video alongside as well. Thank you!
Thanks for the feedback! It is great to know that you found it useful! After trying it out, and being a Whitestone Dome user on and off for years, I decided it was worth a deep-dive so that people could see the install process.
I was shocked that your old Milomdoi screen protector just "Came Right Off". I have taken mine off twice now and each time I have had to scrap it off in small pieces. It was completely stuck to my screen.
I'm using a Latercase right now. The Milomdoi scren protector is just large enough that that the case options without popping edges is tough. So far, the ones that work without issue for me are: Latercase - Good to go, Samsung S-View Wallet Case - Good to go, Spigen Ultra Hybrid Case - If screen protector is centered (not too far up or down), works great.
Great question - I didn't do a precise before and after but I just looked at an old selfie and compared it to a new one and it looks the same. Even zooming in I didn't see any color or focus problems, so I would say there are no problems as I'm seeing it right now. When I have had issues with glass screen protectors in the past, it is often only visible when there is background lighting or off-angle light that gets caught in the glass and washes out the image or creates odd visual artifacts. I'm not seeing that here, but it might be that outside on a bright day it could be different.
How do I get it installed without getting glue in the buttons on side or anything? Also, how hard is it to take off later? Any issue with main screen after use?
No issues with the screen or front camera. Easy to remove, use really thin cardboard like a business card. This is a great product when applied properly.
I've just opened my Milomdoi screen protector box for Samsung S23 Ultra, and there is no glue. This video says "glass" protector. I ordered the 9H Glass Tempered Protector. What's the difference?
Milomdoi sells both a normal adhesive screen protector and the UV cured adhesive screen protector. I've seen some reviews saying the normal one also works fine with the fingerprint sensor but I don't have experience with it personally.
@@mihailaurentiu5050 I have installed dozens of screen protectors using UV Adhesive and never had an issue with speakers or mics. Always have worked great afterward.
@@completionottech Thank you for your reply.I am scared because I payed a fortune fot this phone and I don't have too much experience with UV screen protectors,I don't want to do something to damage the phone.
Hey thanks for your vid. It's clear and concise without a bunch of rambling. I have this product and used it, but now have a crack. I'm replacing it with the same product and just wanted to go through tit again.
I bought the same one i watched ur video to install it came out perfect I was amazed on how perfect it was. Thanx
Awesome!
From where you bought it?
I got this screen protector after failing with the amfilm one, which drove me nuts. I must say I was really surprised how well the fingerprint works on the Milomdoi and I managed to install it without any dust or bubbles trapped inside. I think this is the best screen protector for the S23 Ultra on the market at the moment.
Awesome! I'm glad it went on well. I've also become a fan.
Since it covers the front camera, do you notice any quality reduction when taking selfies?
@@hbhavsi I haven't tested it fully, but sofar I have seen no degradation in quality of selfies
yea this is the best one by far. this brand also sells one without the uv which is really bad and leaves lots of air bubbles. i went through 4 screen protectors thinking it was user error but i got this one first try with only a tiny piece of dust
@@darkbustergt8085 Yeah, I've been very happy with them. The only gripe I have is that the screen protector is slightly too large for most protective cases. I've been limited to the Latercase and Samsung Smart View case since acquiring it since all my other cases apply pressure to the side of the glass. Not great, but not horrible either.
dude great video thanks keep it up, not sure if the top right extra camera angle was useful but im sure you had a reason for it. subscribed looking forward to your other videos
very informative. I've had my s23 ultra for a week and ruined two screen protectors installed with this method and one flolab nano which has bubbles...I just ordered this set from Amazon, so we'll see. thanks for the tutorial!
Great to hear! Hopefully it works well for you. I'm really digging them. The only part that is of any concern for me is case compatibility, which is a potential issue for all protectors.
Hey, I got this protector and spigen ultra hybrid, but the screen protector is too close to the side edges, so when I dropped it, it peeled. Do you know of any case that has some protection and works with this screen protector? Maybe spigen thin fit? Something else?
I primarily have been using the Latercase with it. I suspect the Pitaka cases or other ultra thin cases would work. It is definitely one of the weaknesses of the screen protector.
@@completionottech thank you!
Hey, is there a case that you recommend with this screen protector?
Can you use this if your screen is cracked?
This was a wonderful and informative video, lots of clear direction and tips for better installation. It's very helpful to have the merchant's video alongside as well. Thank you!
Thanks for the feedback! It is great to know that you found it useful! After trying it out, and being a Whitestone Dome user on and off for years, I decided it was worth a deep-dive so that people could see the install process.
I was shocked that your old Milomdoi screen protector just "Came Right Off". I have taken mine off twice now and each time I have had to scrap it off in small pieces. It was completely stuck to my screen.
Which phone case are you using and how is it fitting with the new screen cover?
I'm using a Latercase right now. The Milomdoi scren protector is just large enough that that the case options without popping edges is tough.
So far, the ones that work without issue for me are: Latercase - Good to go, Samsung S-View Wallet Case - Good to go, Spigen Ultra Hybrid Case - If screen protector is centered (not too far up or down), works great.
Since it covers the front camera, do you notice any quality reduction when taking selfies?
Great question - I didn't do a precise before and after but I just looked at an old selfie and compared it to a new one and it looks the same. Even zooming in I didn't see any color or focus problems, so I would say there are no problems as I'm seeing it right now.
When I have had issues with glass screen protectors in the past, it is often only visible when there is background lighting or off-angle light that gets caught in the glass and washes out the image or creates odd visual artifacts. I'm not seeing that here, but it might be that outside on a bright day it could be different.
@@completionottech thanks for your response!
so, it doesn't work well with otterbox? Thanks
Likely not. I have not tried the OtterBox but the screen protector might get caught on the edges.
@@completionottech ohh man I already bought otterbox cases. you don't advice to try it at all?
How do I get it installed without getting glue in the buttons on side or anything? Also, how hard is it to take off later? Any issue with main screen after use?
No issues with the screen or front camera. Easy to remove, use really thin cardboard like a business card. This is a great product when applied properly.
I've just opened my Milomdoi screen protector box for Samsung S23 Ultra, and there is no glue. This video says "glass" protector. I ordered the 9H Glass Tempered Protector. What's the difference?
Milomdoi sells both a normal adhesive screen protector and the UV cured adhesive screen protector. I've seen some reviews saying the normal one also works fine with the fingerprint sensor but I don't have experience with it personally.
What about the speaker mate?Is still "alive" under floody glue?
Speaker is good. No glue in the speaker or microphone.
@@completionottech thank you.I ordered one but I will send it back because I am afraid to don't damage the phone.
@@mihailaurentiu5050 I have installed dozens of screen protectors using UV Adhesive and never had an issue with speakers or mics. Always have worked great afterward.
@@completionottech Thank you for your reply.I am scared because I payed a fortune fot this phone and I don't have too much experience with UV screen protectors,I don't want to do something to damage the phone.
Does the phone have to be on when you're doing this? Or should you have it turned off
Doesn't matter. I don't turn mine off while swapping screen protectors normally but you can.
It's not that easy; the push tab 2 part is where the split doesn't happen; I gotta manually break it off
Thanks for commenting!
WORLD BEST PHONE =SAMSUNG phone 👍