chevelle front disc brakes drop spindle

ALL MY VIDEOS ARE IN 1080p HI DEF SO CHECK THAT OUT
i apologize my storage got full and did not allow me to include installing the outer rotor bearing and the seal over it... just tap the seal on flush with the rotor... bearing then seal.. sorry
car is a 1970 chevelle
video is about the common 2" drop spindles found online
modifications you will have to do to run stock existing front disc brakes
leave me any type pf comment.. my early videos...just trying to get a feel of how to make a video showing the basics of my current project..
please subscribe i am going to build the whole car from parking brake to paint on you tube... thank you

[@kwpowersystems3973]

NICE. IM DOING MY 68 THIS WEEKEND

[@68Camaro.]

Thank you I aways watch your video for my 70 el camino and 69 convertible.

[@realsteelmotorcars2894]

Mr. Craft your video was helpful. I shopped E-bay for my lowering spindles, drilled rotors, backing plates
and caliper brackets piece by piece did not buy the kit so I would of thought WT!!! the parts are wrong !!!
so ya you saved me some time. so good video, tricks of the hot rod mods to ad to my bag.................
I am doing A 1967 El Camino bb 427 SS that never was I will also be cutting coils and off set A arm
shaft kits for header clearance ... by the way, get a bearing packer less than 20 bucks. or not THX

[@gavinW0313]

Good job helped me out,You done fine

[@castilloaguirrefernanda1843]

me gusto, bien explicado estoy trabajando en mi 64 camino, gracias

[@kkenason8728]

great info !

[@aurelmoumeni3246]

Veeery nice thank you

[@chriscraft77022]

sorry, early video..... hard for me to watch now... i was discovering video editing at the time

[@manueldarby3160]

What happens if you dont grind bottom of brake caliper bracket, bc I was still able to bolt on, but will I have putting trouble putting caliber back on, asking bc I have no access to a grinder

[@markt9438]

just maybe using a malibu that had a SB motor with air it sits high and adding a BB to it you will not need drop down spindles ! I am about to find out .

[@billhayball8439]

hey chris good vid !!!! any info on the kit you ordered ??..thanks

[@blakebiltwell5]

Where did u buy the bearings?

[@MrJose123704]

Tall dropped spindles for the improved camber roll

[@oldscar6169]

Love your videos, but your right that’s not the way to pack a bearing

[@dan9809]

Hi Chris, are your front control arms stock? If so, did you upgrade all the front suspension bushings to polyurethane? Rotors look like PS and calipers look like AZ brand.

[@chriscraft77022]

stock are lower.. I have SPC fully adjustable uppers now ( video somewhere)

[@elliottmcgaskinjr70impalaboi]

What kind of spindles I’m having trouble finding spindles for my 70 impala. Do I need to change the ball joints?

[@chriscraft77022]

you may have to get originals if they don’t come up on google search

[@CarlosRamirez-xg1qj]

Anyone know what size hex the caliper bolts are?

[@hunterwebb9507]

Carlos Ramirez 3/8”

[@Rafael5leyva]

Hey bro i got a problem with my 70 monte carlo and the left front caliper is getting lock....i tried tekin the caliper of push the piston or cylinder all the way in put it back on spins freely and take it for a spin and keeps getting lock again but the right caliper stays ok ....bad caliper or is it something wrong with the brass block attached to the chassi that it may be bad but a like I said the right side is ok....

[@chriscraft77022]

bad caliper

[@Rafael5leyva]

Ok I'll try tha tomorrow thanks

[@davidcox2498]

Can i buy your old ones..i don't want to drop my truck...

[@chriscraft77022]

i gave all that stuff away years ago, sorry

[@9011combo]

hey man u suck at greasing..lol. .just joking. good video, I have the same brake brackets and I thought I got the wrong parts. now I feel better. I guest I have to cut it like yours to make mind fit. but thank u for video..

[@darrenkopp4933]

dude you where right there you should have popped off the cap an trim that cotter pin other than that good job