Great video! I got all for of my brakes done on my 2011 Nissan Rogue today in 4.5 hrs with the recommended break-in procedure. I noticed that I only had to remove 1 screw on the bracket. The top screw had no threads and seemed to only act as a pivot. I hope I didn’t screw it up. It seems to stop great now!
+Jenny C As of 6/16/19 at 9:01 AM EST, we have 2 front and rear brake kits for a 2009 Nissan Rogue, one for $159.95 and one for $164.95. Please keep in mind our prices can fluctuate from time to time. The amount of time it takes depends on who is doing the installation, and their skill and knowledge level with auto repairs. 1aauto.com
+A GIRL AND A DOG Thanks for checking us out. If you do dot feel confident you can do the job yourself it is always a good idea to see if you can get some help. The last thing you want to do is tear apart half of the car and not be able to complete the job!
+Rodolfo Elambo Thanks for the comment, Rodolfo. The best way to know is to test how the vehicle brakes. Good brakes will be smooth and be very responsive, while worn brakes will squeal and sometimes cause a pulsing feeling in the pedal at lower speeds.
1 year late, but its not necessary to bleed the brakes unless you remove a brake hose/line. If all you do is push the piston back in, there is no reason to bleed
+Padua Aparici Thank you for watching. The caliper bolt should be 20 - 25 ft lbs, but this was found from a separate source. We recommend verifying the torque specification with a dealership, or other source. 1aauto.com
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Great video! I got all for of my brakes done on my 2011 Nissan Rogue today in 4.5 hrs with the recommended break-in procedure.
I noticed that I only had to remove 1 screw on the bracket. The top screw had no threads and seemed to only act as a pivot. I hope I didn’t screw it up. It seems to stop great now!
Thank you. This was very informative and very easy to digest.
+SickBabySeals Thanks for checking us out. 1aauto.com
I've replaced the brakes on all my cars with ease, except my Rogue. For some reason, it is intimidating.
Thank you! I saved a decent chunk of money. You are "liked"!
+Yankee Moto Thank you!
How much does it usually cost to replace them front and rear pads and rotors? How long it takes to replace them usually?
+Jenny C As of 6/16/19 at 9:01 AM EST, we have 2 front and rear brake kits for a 2009 Nissan Rogue, one for $159.95 and one for $164.95. Please keep in mind our prices can fluctuate from time to time. The amount of time it takes depends on who is doing the installation, and their skill and knowledge level with auto repairs. 1aauto.com
Thank you so much , that was so complete , you're the best.
Thank you for the great feedback and for watching! +joey jenks
Second comment, you are awesome at teaching. Thank you.
No springs for the brake pads?
That hole in the caliper is for a bar so you can push your piston back in before you take the caliper off.
lock-tite anti seize on the bracket bolts?
Omgosh, you make it look so easy but I don't think I could do this. I'm on a fixed income and thought I would be able to do it. Now I'm scared😦😦😦😦
+A GIRL AND A DOG Thanks for checking us out. If you do dot feel confident you can do the job yourself it is always a good idea to see if you can get some help. The last thing you want to do is tear apart half of the car and not be able to complete the job!
It's easy. Really!
Just make sure you have all the proper tools. Closed end wrenches and a rubber hammer for the tough to remove bolts that are siezed up.
You can do it!!!!
Rogue Life - wish I could help I’m in Florida palm beach area
Thank you.
How do I know if my break pads and rotors needs a replacement?
+Rodolfo Elambo Thanks for the comment, Rodolfo. The best way to know is to test how the vehicle brakes. Good brakes will be smooth and be very responsive, while worn brakes will squeal and sometimes cause a pulsing feeling in the pedal at lower speeds.
Noticed you didn't bleed the brakes? Thought that was necessary when doing a brake job?
1 year late, but its not necessary to bleed the brakes unless you remove a brake hose/line. If all you do is push the piston back in, there is no reason to bleed
Brakes grinding after replacing pads and new rotors on 2011 Rouge. Not sure whats the problem.
Kevin Brown same here
how did u solve it?
Brake dust shield
Are there torque specification for the calipers?
+Padua Aparici Thank you for watching. The caliper bolt should be 20 - 25 ft lbs, but this was found from a separate source. We recommend verifying the torque specification with a dealership, or other source. 1aauto.com
what about the torque for the bracket bolts, thanks
Definitely a northern state car. Snow and salt.
+BEAVIS We are based out of Westford MA and have a distribution center down the road in Littleton.
looks like massachusetts rust to me
Yo le hubiese puesto unos caliper nuevos o los hubiese pintado a la verdad están muy feos para ese año