Hello. Great wood working. Like you, I don’t use and mails in my speaker builds. And using the biscuits is well worth the extra time. You did you not use and felt inside on the back walls ? And would you share your build plans ? I have a pair of NOS Fostex FE166En drivers and your box build is just the box I’d like to build Thank you and will be watching more of your woodworking skilled videos
Thank you for your comment! I used biscuits for reinforcement, but I don't think it's a problem if you don't use them. The Fostex FE166En is a 16cm driver, so it can be used with this design. However, the build plans are hand-drawn and drawn in Japanese, so it may be difficult to understand.
Front baffle edge diffraction? Umm…. Nice build, but I would make sure the front baffles are rounded off at the edges as opposed to sticking out like the KLH 5 or the Wharfdale Linton. Edge diffraction is a real thing and can affect soundstage and imaging. Otherwise great build. Well done! 👍👍
ok you showed us that you are a good carpenter.. but nothing from a design... black midnight... no data, no reasoning, no calculation, no process... you found somewhere, a design of a rear funnel, copied it, and put the 2 first random loudspeaker you found in front of you without a crossover... Unacceptable... almost a cheat...
@@ClaudioMartella okay now we are enlightened. we realized that you have no idea about the design, calculation and construction of a speaker and just like a good carpenter you tried to copy a specific speaker by replacing the original speakers with whatever cheap you found on the market that fits the holes...
Sansui produced the SP-707J back loaded speaker using a JBL speaker. They are so rare. It's nice to see this cabinet being built again.
Very nicely built , wonderful craftsmanship !
Very good job
your enclosure is the state of the art
thanks!!
Splendida realizzazione, complimenti! Io le ascolterei con un single ended monotriodo a riscaldamento diretto 🤩
Great work. I have the same driver and I want to do similar project. These Fostex drivers are awesome...
Lovely work, old boy! Really well done!
please share more and more and more videos. You have done a great job and i'm really interested. just WOW
Very nice. And i am sure they sound amazing after the Fostex driver has been run in after 100 hours.
You are an artist
Amazing
Would love to see more of your work!
Very good woodwork. Very very strange to fit the drivers before box complete and risk glue squeezing out and dripping onto drivers.
Nice work
Hello. Great wood working. Like you, I don’t use and mails in my speaker builds.
And using the biscuits is well worth the extra time. You did you not use and felt inside on the back walls ? And would you share your build plans ? I have a pair of NOS Fostex FE166En drivers and your box build is just the box I’d like to build
Thank you and will be watching more of your woodworking skilled videos
Thank you for your comment!
I used biscuits for reinforcement, but I don't think it's a problem if you don't use them.
The Fostex FE166En is a 16cm driver, so it can be used with this design.
However, the build plans are hand-drawn and drawn in Japanese, so it may be difficult to understand.
素晴らしい技術で感心しました。私にはできそうもないです。
FE163En-s は２０１１年のユニットですね。保存状態もよくいい音でしょうね。
よくご存知ですね！
このスーパーツィーターも同時期に限定販売された物です。
日常が忙しく、設計から完成まで10年近くかかってしまいました…
Nice work !
Fantastic work....
thanks!
Nice work, do you have a drawing PDF from the plane?
No, this is just a handwritten drawing.
thanks!!
Can I get or buy a set of your build plans?
Wow!
Art 👍
Impresionante trabajo felicitaciones.
*THANK YOU FOR SHOWING HOW THEY SOUND…LET ME SQUEEZE A FART BRO*
Front baffle edge diffraction? Umm…. Nice build, but I would make sure the front baffles are rounded off at the edges as opposed to sticking out like the KLH 5 or the Wharfdale Linton. Edge diffraction is a real thing and can affect soundstage and imaging. Otherwise great build. Well done! 👍👍
MUY BUENAS CUAL ES LA MEJOR MARCAS DE BOCINAS DE BAJOS AGUDOS Y GRAVES OARA ACOPLAR UN BUEN PARLANTE??????
何と！ ・・・ 私と同じフルレンジを！
私も同じフォステクスのFE163-E-改（改＝φ120×ｔ15のキャンセル・マグネット接着+磁気アース取付）を使用しています！
片CH.２発のヴァーティカル・トゥイン配置です。
間には同じ、フォステクスの最安ホーンツイータであるFT17H-改（改＝防磁カバー撤去同径のキャンセル・マグネット接着＋樹脂製ホーン2か所に穴をあけシリコンコーキング材を注入-共振減衰用）を１発挟んでいます。
スコーカーはこれも同じフォステクスの古参ワイドレンジツイーターのFT600-改2発のヴァーティカル・トゥイン配置（改＝φ80×ｔ10のキャンセル・マグネット接着+磁気アース取付）の構成の３Wayです。
エンクロージャーは手造りで自作の145ＬのＴＱＷＴエンクロジャーです。
折けしの共鳴管長は３６０㎝ありますので、１/４波長共振周波数は23.5Ｈｚです。
中韓のリスニング・ポイントでの実測で、20Hz～18KHz間完全にフラットです。
このSP.システムの、およそ6年前の古い空気録音です。
th-cam.com/video/zBDRWTvC8do/w-d-xo.html
Where to order this kind of plywood? What is its name? Thanks
This plywood is Finnish birch.
In Japan, it is often used for acoustics. The price is high...
bought it here↓
gouhan.net/
Con el baffle que recomienda el fabricante, suena exelente.
Perfect!!!
Thank you!!
ベニア？なんだけどとても美しい仕上がり
ありがとうございます！
フィンランドバーチという白樺の合板で作りました。
Nice work.100%. Craftmn. Difficult to find japanese fostex horn plan. ( nagaoko) !!!!😩😩😩
thanks！
Nagaoka is famous, but I haven't used it as a reference.
What Wood is used for this build?
I used Finnish Birch plywood.
КАКОВ НОМИНАЛ КОНДЕНСАТОРА?
Емкость конденсатора 0,68 мкФ.
( 0.68μF)
Я использовал CS0.68 от fostex.
Спасибо.
👍👍👍👍👍🙌🙌🙌👏👏👏👏👏🙏
ok you showed us that you are a good carpenter.. but nothing from a design... black midnight... no data, no reasoning, no calculation, no process... you found somewhere, a design of a rear funnel, copied it, and put the 2 first random loudspeaker you found in front of you without a crossover... Unacceptable... almost a cheat...
Those as fostex speakers and there was a crossover inside.
@@ClaudioMartella okay now we are enlightened. we realized that you have no idea about the design, calculation and construction of a speaker and just like a good carpenter you tried to copy a specific speaker by replacing the original speakers with whatever cheap you found on the market that fits the holes...
People can't respond to your stupidity. Sorry, just can't. 😵💫
@@Armonia2810yes, agree with you.
@@Armonia2810 Do you practice at being a tit because you're very good at it
man of culture i see;)