My 10 Favourite Ways to Use an EQ Pedal
ฝัง
- เผยแพร่เมื่อ 5 ก.ค. 2024
- These are my ten favourite ways of using a graphic equalizer pedal. Which is your favourite? Did I miss any?
Here are links to some of my favourite EQ pedals and some of the other pedals I used in the video:
- Boss GE-7 Equalizer
USA: amzn.to/3o2QctE
UK: amzn.to/3ZTVvJq
- Boss EQ-200 Graphic Equalizer
USA: amzn.to/41ex0HN
UK: amzn.to/3zNTJyW
- MXR M108S Ten Band EQ
USA: amzn.to/3KMsg6Z
UK: amzn.to/3KsDufD
- Source Audio EQ2
USA: amzn.to/3mhOR1U
UK: amzn.to/40WhC3a
- Behringer EQ700 Graphic Equalizer
USA: amzn.to/3zP5Ag5
UK: amzn.to/41hWP9S
- Boss OD-3 Overdrive
USA: amzn.to/3UqqYBH
UK: amzn.to/3o1gDjF
- Ibanez TS-9 Tubescreamer
USA: amzn.to/3mmMlY4
UK: www.andertons.co.uk/ibanez-ts...
- Boss CE-2w Chorus
USA: amzn.to/3KlQCmF
UK: amzn.to/3ZXvNUn
Timecodes:
00:00 - Intro
00:15 - 1. Re-voice Your Main Overdrive Sound
01:05 - 2. Overdrive Pedal Emulation
02:00 - 3. Re-voice Fuzz & Distortion Pedals
02:50 - 4. Choose Which Frequencies to Distort
03:57 - 5. Pickup Emulation
04:47 - 6. Jaguar 'Strangle' Switch In a Pedal
05:45 - 7. Master Volume, Tone & Attenuator
07:15 - 8. Cocked Wah & Radio Speaker
08:47 - 9. Get More From Your Modulation Pedals
10:09 - 10. Self Oscillating Pitch Generator - เพลง
![5 Ways To Use EQ Pedals | Too Afraid To Ask [Boss EQ-200]](http://i.ytimg.com/vi/rA17mta5kq4/mqdefault.jpg)
![5 Ways To Use EQ Pedals | Too Afraid To Ask [Boss EQ-200]](/img/tr.png)
![[TH] VCT Pacific Stage 2 - Week 4 Day 1 // PRX vs RRQ | GE vs GEN](http://i.ytimg.com/vi/iIi2_04jGr0/mqdefault.jpg)
EQ pre-distortion/overdrive is pretty powerful. It can totally change the character of the distortion: add more bass, it becomes looser and fuzzier; add mids and it becomes tighter and crunchier; add highs and the attack gets a gritty edge.
Of course,also,fat od like od3>eq (Flat mids,lo-hi cut to taste)>hi gain od,distortion or amp(behringer tm300 tube modeler in my case)
These is mighty tight and low noise.
Any od with good low like od3 will do the trick,great for an ultra-chugg,never though it could work but geez,my amps are getting dusty.Salute.
I currently use two GE-7s on my pedalboard. One I use as a boost after all my gain pedals. The second I use as a boost before my gain pedals.
I can gently tweak either pedal to overcome room resonances on some stages. Typically, the one before my gain pedals gets these adjustments more often than the other because the room resonance is more evident during solos with gain.
Both are valuable tools to me because they are so versatile. I have used them to achieve certain signature tones for recognizeable songs to great effect.
Some nights in some rooms I'll hit on a magical setting that is immediately noticed by the other band members and by the audience. Gigs where that happens can be a blast and can inspire the whole band resulting in a great show.
Once I discovered the many uses of EQ, I bought the Source Audio EQ2 pedal. While it may be pricey, the options and flexibility make it equivalent to 3 pedals. I use it as a tuner pedal. It has a noise gate built in. As for the actual EQ, there are really 2 EQ channels that can be set in a variety of ways. You can run stereo with a different setting on each side, or you can do like I have done, where I have one EQ set pre-drives and another set post-drives. That way I get maximum flexibility without needing 2 physical EQ pedals on the board. With a separate tap switch, I can access 8 presets. If I went MIDI, there's way more than that. This video shows that there are so many uses for an EQ pedal, it makes programmable ones with presets make the most sense. I'd highly recommend.
Great video! Not enough people talking about how great EQ is and how to use it. EQ is the most underrated effect pedal IMO
Same here bro you just get so much more control of how you dial in your tone
@@c.a.k.comedy692 but does it matter if you use it in front of the amp or in the effects loop? in a loop , you EQ the pre amp section
True! EQ and COMP is underrated IMO
This is such a good channel, thanks Michael! By far the most inspiring guitar channel i've come across
I can’t believe I waited so long to get this pedal and it’s all because of you Michael. You’re one of my favorite guitar people. Thank you!
Fantastic and very educational video! EQ can do so much for a stale rig.
I struggle to stay engaged with a lot of videos that have the info I’m looking for, find myself skipping around a lot. With your vids, right as I start to be ready for the next part, you move onto it for me 😂 the pace of how you do these really works for me, so thanks for sharing all your knowledge this way.
Hey Michael this was really interesting & enlightening, I have 2 eq pedals stored away , now I’m going to put them on my pedal board & try out some ideas.. I particularly liked how you got different tones from the boss overdrive pedal since I have the same one.. really inspiring thanks so much for taking the time to put this together
Great video. I have two pedalboards and both of them have an eq pedal. One of the most important pedals ever made, they completely change the dynamics of your rig.
Btw just subscribed 🙂 your videos are really great and you definitely deserve more subscribers.
i'm surprised this video has 7% downvotes. there's usually only 2-3% downvotes at most unless the video title is misleading or the video fails to actually live up to the thumbnail. but this was exactly what i was looking for, and there's nobody commenting about what's supposedly wrong. i wonder why all those people downvoted
Genuine question How do you know how many downvotes a video gets since Google disabled the 👎 dislike button?
@@martinheath5947 there's a chrome extension that brings them back. they're still visible in google's API--just not in the HTML code anymore without the extension.
Hey, thanks for the support and kind words! It doesn't look like there are many downvotes on my end though, my TH-cam analytics says 822 up and 5 down, that's less than 1%... Great to hear you found video useful.
🎉
Some guitarists are arseholes
A massive thank you. This channel is a treasure trove! Criminally undersubscribed too.
That's very kind thank you!
Great video Michael! For years I used a Marshall JTM 30 amp with the clean channel all the way up as the warm overdrive was lovely, but with a single coil guitar it never quite broke up enough.... add an EQ pedal and the sound had a really great warm "crunch", without ever having to use overdrive pedals. EQ pedals are underated boxes - they definitely are not just for someone trying to emulate David Gilmour!
Cool video. Just purchased my first EQ pedal :) Can’t wait to try some of these ideas out
No 7! That makes the GE7 a must have for any gig. Get heard, not louder.
fantastic addition to your earlier two on this topic!
Thank you! More to come
Yet another superb video.
I've recently fell in love with a RAT Deucetone again too.
The 'Clean Rat' setting is great and the cascading is fantastic.I only mention it because I sort of expect you to love it.
The RAT Deucetone deserves more coverage.With the Eq pedal , well, it is massive
Yes I love RAT pedals! I used to use two cascading into each other when I was younger, Graham Coxon style. The Deucetone RAT looks like a similar concept but with even more options. I can only imagine that combined with an EQ pedal the options would be vast! Thanks for commenting.
Immediately thought of Money for Nothing when you mentioned the Cocked Wah sound and Lo and Behold,you give us a similar version of it.!Great!
Nice work Michael, I enjoy having an EQ after everything maybe even sitting on the amp for fine tuning, especially taking mud out to free up some headroom in the amp.
I had a wmd parametric eq and most of what it did can be done with these slider style pedals but I wanted to bring up one that I don't think they can - and that's to actually set the hi frequency to the maximum, which on the wmd is well into the airy sounds sort of beyond our hearing, and the Q of that frequency as low as possible, and barely any level boost, just a touch of that "air" completely removes the blanket sound on my amp, it can be hard to get this just right as the harsher tones can come through but I found I could open up the treble of my sound and use the mid control to isolate harsh stuff that was well below the airy frequencies but still came along for the ride.
That single move transformed the sound a lot and felt like high end rack gear, much more effective than cutting bass or notchy mids. Usually I wouldn't look to boosting to find clarity but if you have an EQ that reaches high enough you might find some magnificent sparkly cleans here. I think of it like way more headroom for the treble since most of the guitars voice is not occupying that range but can breathe more because of it.
Number 3 is exactly what I needed to see!!
Od3 and ge7 is a criminal combo,the order of placement adds even more options.
Od3's slight bass surplus makes it so versatile for dialing precise bass cut with the eq,all the thump one could ever need.
Salute
Loved that first tone!!!
Really cool, I need to get more experimental with my use of EQ. Now even thinking about getting two for my setup
Wow really helpful video, Michael. Thanks heaps!
Great video. You can get even more versatility by putting the EQ in the send/return which sounds completely different than just putting it in front of an map. I like track one guitar with the EQ in front of the amp and then another guitar with the EQ in the send/return. Between doing this, IRs, pedals and amp modeling there's an endless amount of tones you can get these days without spending much money.
Im finding since i bought this its one of theee most useful and important pedals on any board.
Wow - This is really informative. I love my GE-7 - I use it mostly as a volume boost and to boost highs and lows slightly, and in front of overdrive and distortion pedals to make them crunchier. I didn't know it had so many other applications.
Great to hear!
Really great video. Thanks for the advice
You have such good ears and brain! You can identify which frequency and eventually tweak to what you want to hear, this is pricelss indeed (this skills and musical talent). Bravo!
Wow, thank you!
Excellent video! I recently placed a GE-7 after my DS-1. Between the GE-7 and the all of the gain/tone control sensitivity on the DS-1 you can acvhieve so many sounds. Also I'm super jealous of your clean CE-2 and DM-2 pedals Lol.
I must try that! It'd be fun to use an EQ pedal to push such a classic distortion pedal to the limit of what it can do.
Great tips. EQ gives you lots of options.
This is a great video Michael; you make a really strong case for this being a true swiss army knife. I personally believe many channels downplay this pedal's usefulness, because how then could they sell you other gear?
Will definitely check out more of your vids.
You are a very practical and creative musician.
This pedal has been my secret weapon on a wide variety of tones and sounds. You’d be surprised how you can change your amp sound as well. These pedals are also great as a boost.
Good tip on adding that second patch cable!! The more you know!!
Loving this channel 🎸
I’ve been recording with an EQ pedal first on my chain lately with great success! I used to handle EQ ITB after recording but like the extra control with an EQ pedal up front
Thanks for another great video, Michael. It's always good to know how to get the most from the gear you already have, you prove a flanger and an EQ are severely underrated pedals. I'm surprised I don't often see them recommend for beginners and players who are new to pedals.
Also, is that an AC4 with a 12" speaker in the shelf in the background? How do you like it?
great video and great playing homie
Definitely biased by my love for older sounds but that drive tone without the EQ pedal was perfect for me, I thought that was with the pedal engaged for a second because it sounded so good. You just can’t beat that bite and clarity!
Thanks for that video. Very interesting and useful.
I’ve been using the GE-7 in my loop for lead boosts and bring the level up a bit when I turn down the volume to clean up. I also use one on my acoustic rig to boost solos above my rhythm loop.
Great video!
So can you use one of these pedals instead of a treble boost pedal? I'm probably asking a really fkn stupid question here lol. I was thinking of making my own treble boost pedal but maybe I don't need to bother (I've just ordered a second hand GE 7)
@@bigbasil1908 yes you can. You can play with the output slider so you get that boost. Then just shape the tone by playing with the EQ bands to get your desired tone
Love that radio speaker sound! I really think EQ pedal is a great way to get a lo-fi sound after watchig Rhett Shull video and you prove it right!
Glad you enjoyed it. Yeah I like the radio speaker effect particularly for breakdown sections. Thanks for commenting
Great idea to modify the distortion pedal's sound. I never thought of that.
Pretty sure this channel will blow up in time.
That was stupidly useful! I’ve never seriously wanted an EQ pedal until now.
Fantastic video, I just found your channel, really useful information. Subscribed! and I just also checked out your recent strumming video. Super useful for me. I never really categorized my strumming methods. I'm going to go over that video again and try to build up the foundation. Thanks
Great video, super helpful !!! Beautiful Jaguar! I've always been intrigued by fender offset models, but I have stuck to strats and teles so far. Would love to see more of that guitar in your upcoming videos!
Yeah, it really needs a good setup but yes you've convinced me to move that job up on my to do list, I'd love to use that Jaguar more often in videos. Thanks for commenting!
Another Grear lesson, you are not only a nice guitar player, you are a great teacher foo.
Glad you think so, thank you!
Interesting stuff, especially the self-oscillating effect at the end. The only way I use an EQ pedal is to make an archtop with a floating pickup sound a little more like an acoustic by applying a fairly drastic scoop. I expect it makes a good rhythm/lead switch too.
My EQ has 7 bands. Band 1 i have it all the way at the bottom, band 2 all the way at the top, band 3 at the bottom, band 4 at the top, etc., and it sounds crazy!
Very helpful! Thanks
This is a great video! The way you compared the sound with and without the EQ pedal is better than most other comparison videos I've seen. Most people add too many other variable or play chords with the pedal on and solos with it off, so you don't get a clear picture of how it sounds. Also, are you just adjusting the eq bands in the last segment or are you playing anything on the guitar as well?
Really interesting ..I found that boosting the mids improved the clarity or definition of the signals in many cases.. Especially with gain.. While lowering the mids actually helped definition with the chorus.. Also augmenting the bass on the bridge smoothened the piercing tone of the bridge on the Strat..
For sure
Great tips - Thanks!
Definitely going to try the Big Muff EQ thing.
@2:55 thats the Josh Homme trick. He has one sitting on the amp and then drives everthing else through that.
Love this videos are pretty informative bfor a long time. I use nothing but almost all boss pedelse and the video you posted of the buffers in Boss pedals make a lot of sense. I've replaced most of my boss pedals with other brands but still like to use them from time to time. And yes I do hear the difference in the buffers. I thought I was crazy and kept adjusting my tone controls on myeah. I'm thinking that the amp was just acting funny.
Glad you like them!
Wow, great tutorial, Michael. I'm a late comer to EQ and Compression, but I am catching up fast.
What an excellent video. Thank you, you've given me some really good ideas on how to revoice my overdrives and fuzzes to taste - I may have just saved a pile of cash that would've been spent on new dirt boxes!
Great to hear! Glad to help
nice video and most of all nice Jag !
Thank you! Yeah I definitely want to use that Jaguar in some more videos soon
LPB with rosewood fretboard and white pickguard is, in my opinion, the best color combination for strat, tele ,jm and jag, and I'm partial to offset guitars :)
Great tips 👍👍👍
great video once again :) especially that last bit, reminded me of Radiohead a bit. I wonder if you could do a video comparing the 'normal' graphic eq with a parametric eq, or try to emulate the sound of an HM-2 with a MT-2 and an eq. anyway, always looking forward to your new video's. tnx!!
Yeah good suggestions, maybe comparing pros and cons of the three main type of EQ pedal... standard three band, graphic EQ and parametric EQ. I think they all have their place for certain situations. I'll put it on the list!
This is great, thanks so much
I sold my GE-7 because the sliders introduced a hiss when moved more than half way up _or down._ There is a mod that overcomes this flaw, but the pedal wasn't getting much use. As usual, I see a video like this one and wish I still had it!
Great video - I've been saying for years to fellow guitarists to not waste money on trying this pickup and that, just get an EQ pedal and tweak for each guitar. Even get a programmable EQ pedal and have presets for each guitar to get it just how you like it. I have one two on my board, one at the start and one at the end.
I have a highly berated (vintage) pedal that does a lot this - it's called the Varitone switch on a 345. Still I'm sure much of what you are saying is still valid no matter what. Thanks, I'll be doing more experimenting after having watched this video. Thanks
Good video. "It took me way too long to get around to buying an EQ pedal." Me too. It felt like EQ was "boring". It's actually really *useful*. A Swiss Army knife of a pedal. I wouldn't be without one.
ALL effects pedals should have at least 3 bands of EQ built into them
@@-jank-willson all drive pedals, at any rate.
@@guitarlessonsnow3431 Did I misspeak?!?!
@@-jank-willson no not at all, I just happen to think that drive pedals especially benefit from having a 3 band eq. Wasn’t trying to correct you.
@@guitarlessonsnow3431 it was a joke lmao. I think ALL pedals should have 3 bands of EQ, except for drive pedals. They should have sliders for 5 bands
For e I use a Vox AC30 had with a Marshall MG412A 120-watt 4x12 cab as guitar and a bass rig. When I use it as a bass rig, I use an EQ in the effects loop with a noise gate .
You deserve to be one of the most popular guitar channels
That's very kind. Thank you!
Thanks. I've ordered one of these pedals (second hand) after seeing this video and I don't think I've made a compulsive purchase. I think it is a good investment to get a lot more out of the sounds of my other pedals and my amps. I did think about buying a 1985 GE 7 from japan but I saw that it uses an AC adapter and so I instead ordered a modern version which runs on 9v dc because its just a lot easier for me without having to mess about with multiple adapters lol. I could have bought a cheaper equaliser pedal for £28 (rather than the £80 for the Boss) but in my experience you can't really go wrong with a Boss (my Boss pedals have not failed so far and I've had them since the mid 90's).
Good to hear this was helpful. Yeah the Boss stuff is just industry standard equipment in my view. Hope it works well for you.
What an underrated pedal!
you really can do almost anything with an OD-3 and an equalizer, such underrated tools
I agree. Wise words
I'm thinking of buying a ge7. Some people stack overdrives, but I was thinking that I could probably simulate that by just sending an eq into an overdrive, as a shaped boost, similar to how people use a tubescreamer with the drive down as a boost to tighten up the sound.
Eq is my main effect on the pedal board, i use it all the time for changing up the sound
something cool that i like to do with eq is if your using amp distortion but you want to switch to a lighter more overdriven or even clean sound you can just bring down the volume on the eq, i find it super useful so i don’t have to use the knobs on the guitar or switch to the clean channel and then put an overdrive on
Agreed. Reverse boost is an amazing trick for some high gain amps if they clean up nicely, instead of setting the amp for crunch and boosting it you set the amp for a great high gain tone then kick in a pedal that takes away some level and some low end for a thinner crunch tone.
The guys on Thatpedalshow (and probably some others) call this underdrive to contrast it with overdrive. If you don't want to use the volume knob on your guitar then underdrive can be quite useful and it offers even more control with an eq pedal because you of course have plenty of control over the tone when you ditch the gain/volume so you don't end up with just a quiet muddy tone.
I like to use 5/6 band eq with flanger as "chorus" to simulate the rotary speaker (How To Get 6 Modulation Effects From a Basic Flanger Pedal Like The Boss BF-2) to boost the lows and some highs.
Always love your video, enjoyable to watch. I wish I could be your student. You're an amazing talker. I bought my OD-3 after watching your videos. It's my most favourite pedal now.
I use my MXR 10 Band EQ pedal to emulate the sound of VOX and Marshall clean, I get the EQ curve from "Tone Stack Simulator"
One question, maybe you're not a metal guy. But is it possible to bring out metal sound from a classic distortion pedal (RAT or Distortion+) stacking EQ pedal when the amp must stay clean and untouched?
Wow, thank you! As for trying to get a metal sound out of a classic distortion pedals like a RAT or Dist+, I'd start by trying a similar EQ setting as the first example that I did here and fine tune it as needed. You're right though, I'm not really a metal guy, but when I do go there I find I like a big deep low end, clear high end and some high mids but then a scoop somewhere in the middle frequencies that seems to smooth out the overall sound. Hope that helps.
Ooo mine just went bust a week ago 🥲 great video either way 😁👍
Call me weird, but all you really need is a cocked wah sound.
No treadle needed.
Great video! Any recommendations to learn how to use an EQ Pedal better is always appreciated!
Great video
When I bought my Roland JC 60 in the late 70s I I also got the Boss EQ to improve the sound of my not so good Angelica acoustic.
Just bought chorus and this EQ pedal so that I can carry just guitar and pedals and plug into sound system wherever I go. Simples.
I use my 10 band EQ to clean up the crunch channel of my amp. I set the amp EQ for the clean channel but I don't like it for the crunch channel, so I use it as a separate EQ for the crunch channel to get rid of the mud without destroying my clean sound.
That is a great idea! Thanks for sharing
Ahhh EQ - the most useful, yet least sexy pedal. I'm sure the Boss EQ pedal colour doesn't help! After I saw the light I put an EQ before and after my drives. Great ideas and video as always.
Fantastic. Why the hell has anyone downvoted this ???
Simple, people are fucked
. 7:40 ha ha that’s much better than the Knoffler song you were alluding to !
Use an EQ pedal to re-voice overdrive, distortion, and fuzz pedals, emulate different pickups, use as a master volume and tone control, emulate a cocked wah and radio speaker, and get more from modulation pedals.
awesome. i was thinking about getting an eq pedal. now i'm convinced indeed.
ps there's a city called banfield in south buenos aires
I think I bought my first eq pedal when I started getting into pedals at the very start of learning guitar, it was my third pedal I got after distortion and reverb. I've always been an EQ guy. My motto is "More knobs, the better" 😅
Can never get too many knobs (especially if you're a hooker 😛).
In all my (ignorant) years of playing electric guitar I had never considered an equaliser pedal though I have just purchased a second hand GE 7 off of the fleabay.
You're wiser than most it seems. It took me ages to come around to the idea of getting an EQ pedal, so useful though.
@@MichaelBanfieldGuitar I think my obsession with sounding like the people I was listening to was a big factor, instead of buying directly a 100 watt amp 😂
I like to use a lot of feedback in my stuff, and using this pedal is awesome for that- you can basically "play" feedback similar to the way you are using it in example 10
Ah, kinda like the feedback/Booster FB-2? I hadn't thought of that! Thanks for sharing
Thanks for another great video !
I was wondering if EQ can somehow make middle priced guitar sound like higher priced ones ? 🤔 am I correct ?
The best way I know to use an EQ pedal is between the output of an acoustic guitar's built-in pickup and the sound system (PA). An EQ pedal will allow you to eliminate the horrible "fried" unnatural treble sound of a piezo under-saddle PU, and make the guitar sound almost as good as it would have sounded directly into a microphone, without the damn pickup.
Thanks for sharing this! I only occasionally gig with an acoustic and when I do, I use the DI out on an acoustic amp to feed the signal to the PA, which I find works well. But I can totally see your method of using a graphic EQ in between the acoustic guitar and PA working very well too. Especially if you don't want to lug an acoustic amp around or buy a separate dedicated acoustic guitar preamp pedal. Thanks for commenting!
Must admit only used one of these on the Monitors amp live on stage! Could get the maximum volume out of the monitors with using the EQ to eradicate the "problem" frequency!
Cool idea I'd never thought of using one for that. Thanks for commenting!
Brilliant!
Awesome demonstration!!! I’ve been thinking about picking up a GE-7. Was your noisey when you engaged it especially with your drive pedals??
Yes is does add some noise, it can be annoying but it's only noticeable when I'm not playing. This is an old GE-7 and I'm not sure if the new ones are any better. I know there are mods available for the GE-7 but if you don't want to go that route I'd consider the MXR EQ pedals next. I've got some links to my favourite EQ pedals in the description. Hope that helps.
@@MichaelBanfieldGuitar Agree. I have the MXR 10 band EQ and it is very quiet.
Every guitarist should have an EQ pedal. Very useful tool.
I can’t use a Big Muff without an EQ pedal after it to boost midrange.
Everyone should have an EQ pedal! Hell, I think I might get Gran one for Christmas just in case she ever picks up a guitar.
Hi there! Can you walk us through on how to use these easy because those settings is great on your guitar but might not work easily on ours because we needed to dial our own tone.
Eq pedals prove that not even single od/ds or fuzz can stand by itself we always need to fine tune it with an eq to make it sounds more live and beautiful. btw I was using this boss eq for a few years and decided to quit because no matter if it's on or off it still affect your sounds when it still connected in your signal chain, well that is buffered pedal, maybe boss should upgrade it into a true by pass so the issue will be fixed.
Watched this last night after hearing the words "should've got one ages ago". I bought a cheap pedal today. I'd been thinking about it for a while and am bored with my sound. Cheers
Hi Man, I would like to see the Eq with the wampler deluxe pinnacle, how would the tone look
Hello there, nice video! Would you put your eq pedal before or after modulation pedals?